Get-WdacBidTrace

Get-WdacBidTrace

Gets BidTrace settings.

구문

Parameter Set: Path
Get-WdacBidTrace [[-Path] <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-Platform <String> ] [-ProcessId <UInt32> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: AllApp
Get-WdacBidTrace -IncludeAllApplications [-AsJob] [-CimSession <CimSession[]> ] [-Platform <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: Folder
Get-WdacBidTrace -Folder <String> [-AsJob] [-CimSession <CimSession[]> ] [-Platform <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

자세한 설명

The Get-WdacBidTrace cmdlet gets a list of Built-in Diagnostics Tracing (BidTrace) settings for different applications.

For more information about data access tracing, see Data Access Tracing (Windows 8) (https://msdn.microsoft.com/en-us/library/hh829624(VS.85).aspx) on the Microsoft Developer Network.

매개 변수

-Path<String>

Specifies the full path for an application. This cmdlet gets Windows Data Access Components (Windows DAC) BidTrace settings for the application that this parameter specifies. You can use wildcard characters. If you do not specify this parameter, this cmdlet gets all Windows DAC BidTrace settings.

-ProcessId<UInt32>

Specifies a process ID. This cmdlet gets Windows DAC BidTrace settings for the process that has the ID that this parameter specifies. If you do not specify this parameter, this cmdlet gets all Windows DAC BidTrace settings.

-Folder<String>

Specifies a folder. This cmdlets gets Windows DAC BidTrace settings that are associated with the folder that this parameter specifies. You can use wildcard characters.

-IncludeAllApplications

Indicates that this cmdlet applies to all applications. If you specify this parameter, the cmdlet gets Windows DAC BidTrace settings for with all applications.

-Platform<String>

Specifies the platform architecture. This cmdlet gets Windows DAC BidTrace settings that belong to the architecture that this parameter specifies. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- 32-bit
-- 64-bit
-- All

The default value is 32-bit on a 32-bit process. The default value is 64-bit on a 64-bit process. If you run this cmdlet in a remote CIM session, this parameter refers to the platform architecture on the remote computer.

-AsJob

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#MSFT_WdacBidTrace[]

예제

Example 1: Get all BidTrace settings

This command gets all BidTrace settings for both 32-bit and 64-bit platforms.

C:\PS>Get-WdacBidTrace

Example 2: Get the BidTrace setting for an application on a platform

This command gets the BidTrace setting for the application C:\temp\abc.exe and the specific settings for all of its process instances on the 32-bit platform.

C:\PS>Get-WdacBidTrace -Path "C:\temp\abc.exe" -Platform "32-bit"

Example 3: Get the BidTrace setting for an application by using a Process ID

This command gets the BidTrace setting for the application C:\temp\abc.exe that has the Process ID 1234 on the 64-bit platform.

C:\PS>Get-WdacBidTrace -Path "C:\temp\abc.exe" -ProcessId 1234 -Platform "64-bit"

Example 4: Get the BidTrace setting for an application by using a wildcard character

This command gets the BidTrace setting for the specified application on the 64-bit platform. The Path parameter uses a wildcard character.

C:\PS>Get-WdacBidTrace -Path "C:\*\abc.exe" -Platform "64-bit"

Example 5: Get the BidTrace setting for application in a specified folder

This command gets the BidTrace setting for the application located inside C:\temp on the 32-bit platform.

C:\PS>Get-WdacBidTrace -Folder "C:\temp" -Platform "32-bit"

Example 6: Get the BidTrace setting for application in a folder that includes a wildcard character

This command gets the BidTrace setting for the application in the specified location on the 32-bit platform. The Path parameter uses a wildcard character.

C:\PS>Get-WdacBidTrace -Folder "C:\t*mp" -Platform "32-bit"

Example 7: Get the BidTrace settings for all 32-bit applications

This command gets the BidTrace settings for all 32-bit applications on the computer.

C:\PS>Get-WdacBidTrace -IncludeAllApplications -Platform "32-bit"

Example 8: Get BidTrace settings for both platforms

This command gets all BidTrace settings for both 32-bit and 64-bit platforms, and then store the results in the $bidArray variable.

C:\PS>$bidArray = Get-WdacBidTrace

관련 항목

Disable-WdacBidTrace

Enable-WdacBidTrace

N:Wdac