Disable-NlbClusterPortRule
Disable-NlbClusterPortRule
Disables a port rule on a Network Load Balancing (NLB) cluster or on a specific host in the cluster.
구문
Parameter Set: NonPipeline
Disable-NlbClusterPortRule [-Port] <UInt32> [-ClusterWide] [-Drain] [-HostName <String> ] [-InterfaceName <String> ] [-IP <IPAddress> ] [-Timeout <UInt32> ] [ <CommonParameters>]
Parameter Set: Pipeline
Disable-NlbClusterPortRule -InputObject <PortRule[]> [-Drain] [-Timeout <UInt32> ] [ <CommonParameters>]
자세한 설명
The Disable-NlbClusterPortRule cmdlet disables a specific port rule on a Network Load Balancing (NLB) cluster or on a specific host in the NLB cluster. Disabling new traffic handling should be considered for the port rule using the optional Drain parameter. Specifying the Drain parameter at the cluster level drains the specified ports on all hosts within the cluster, and specifying it at the host level drains the ports on the specific host only.
매개 변수
-ClusterWide
Disables the given port rule on all cluster nodes. If this parameter is omitted, then the port rule is only disabled on one node.
별칭 |
Cluster,C |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Drain
Drains existing traffic before disabling this port rule. If this parameter is omitted, then the existing traffic will be dropped.
별칭 |
D |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-HostName<String>
Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of .
is entered, then the local cluster is assumed.
별칭 |
Host,HN,H |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IP<IPAddress>
Specifies the IP address for the cluster port rule that will be disabled.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<PortRule[]>
Specifies the cluster port rule to disable.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InterfaceName<String>
Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.
별칭 |
Interface,IN,I |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Port<UInt32>
Specifies a port number within the port rule that will be disabled. 이 매개 변수에 허용되는 값은 다음과 같습니다. 0
through 65535
.
별칭 |
P |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Timeout<UInt32>
Specifies the number of minutes to wait for the drain operation before the port rule is disabled. After the time expires, the existing connections will be dropped.
별칭 |
T |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.PortRule
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.PortRule
예제
EXAMPLE 1
This example disables the port rule for port number 80 on the local cluster.
PS C:\> Disable-NlbClusterPortRule -Port 80
EXAMPLE 2
This example disables all port rules on the local cluster.
PS C:\> Get-NlbClusterPortRule | Disable-NlbClusterPortRule