New-NetTransportFilter
New-NetTransportFilter
Creates a transport filter.
구문
Parameter Set: cim:CreateInstance0
New-NetTransportFilter -SettingName <String> [-CimSession <CimSession[]> ] [-DestinationPrefix <String> ] [-LocalPortEnd <UInt16> ] [-LocalPortStart <UInt16> ] [-Protocol <Protocol> {TCP | UDP} ] [-RemotePortEnd <UInt16> ] [-RemotePortStart <UInt16> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The New-NetTransportFilter cmdlet creates a transport filter. A transport filter specifies the TCP settings, as a NetTcpSetting object, to apply to an IP address prefix or a TCP port range. Specify the setting to apply by name. You can use the Set-NetTCPSetting cmdlet to modify a setting.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DestinationPrefix<String>
Specifies a destination prefix of an IP route. The cmdlet associates the transport filter that to the prefix that you specify. A destination prefix consists of an IP address prefix and a prefix length, separated by a slash (/).
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-LocalPortEnd<UInt16>
Specifies the upper bound of a range of local TCP ports. The cmdlet assigns the upper bound that you specify to the transport filter. If you do not specify this parameter, the cmdlet uses the lower range value of 1025.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-LocalPortStart<UInt16>
Specifies the lower bound of a range of local TCP ports. The cmdlet assigns the lower bound that you specify to the transport filter. If you do not specify this parameter, the cmdlet uses the lower range value of 65535.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Protocol<Protocol>
Specifies the type of routing protocol. The cmdlet assigns the protocol that you specify to the routing filter. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Bbn
-- Bgp
-- Dhcp
-- Dvmrp
-- Egp
-- Eigrp
-- EsIs
-- Ggp
-- Hello
-- Icmp
-- Idpr
-- Igrp
-- IsIs
-- Local
-- NetMgmt
-- Ospf
-- Rip
-- Rpl
-- Other
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RemotePortEnd<UInt16>
Specifies the upper bound of a range of remote TCP ports. The cmdlet assigns the upper bound that you specify to the transport filter.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RemotePortStart<UInt16>
Specifies the lower bound of a range of remote TCP ports. The cmdlet assigns the lower bound that you specify to the transport filter.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SettingName<String>
Specifies a setting name. The cmdlet associates the setting that you specify to the transport filter. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Internet
-- Datacenter
-- Compat
-- Custom
별칭 |
none |
필수 여부 |
true |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
- None
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetTransportFilter
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
예
Example 1: Create a transport filter
This command creates a transport filter for the 192.168.0.0/16 network. The data center TCP settings applies to all TCP connections between the computer and other computers in this network.
PS C:\> New-NetTransportFilter –SettingName Datacenter –DestinationPrefix 192.168.0.0/16
Example 2: Create a transport filter for an app
This command creates a transport filter for a compatibility setting. The command specifies port ranges for both local and remote computers.
PS C:\> Get-NetTransportFilter –SettingName Compat –LocalPortStart 5000 –LocalPortEnd 5000 –RemotePortStart 6000 –RemotePortEnd 6000