Get-NetIPv6Protocol

Get-NetIPv6Protocol

Gets IPv6 protocol configurations.

구문

Parameter Set: ByName
Get-NetIPv6Protocol [-AddressMaskReply <AddressMaskReply[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-DefaultHopLimit <UInt32[]> ] [-DhcpMediaSense <DhcpMediaSense[]> ] [-GroupForwardedFragments <GroupForwardedFragments[]> ] [-IcmpRedirects <IcmpRedirects[]> ] [-MaxDadAttempts <UInt32[]> ] [-MaxPreferredLifetime <TimeSpan[]> ] [-MaxRandomTime <TimeSpan[]> ] [-MaxValidLifetime <TimeSpan[]> ] [-MediaSenseEventLog <MediaSenseEventLog[]> ] [-MldLevel <MldLevel[]> ] [-MldVersion <MldVersion[]> ] [-MulticastForwarding <MulticastForwarding[]> ] [-NeighborCacheLimitEntries <UInt32[]> ] [-RandomizeIdentifiers <RandomizeIdentifiers[]> ] [-ReassemblyLimitBytes <UInt32[]> ] [-RegenerateTime <TimeSpan[]> ] [-RouteCacheLimitEntries <UInt32[]> ] [-SourceRoutingBehavior <SourceRoutingBehavior[]> ] [-ThrottleLimit <Int32> ] [-UseTemporaryAddresses <UseTemporaryAddresses[]> ] [ <CommonParameters>]

자세한 설명

The Get-NetIPv6Protocol cmdlet gets the global IPv6 protocol configurations for the computer. The cmdlet returns IPv6 Protocol settings, such as the Internet Control Message Protocol (ICMP) setting, the default hop limit, the neighbor cache limit, and the multicast configuration. If you do not specify any parameters, the cmdlet gets all the IPv6 Protocol configuration settings.

매개 변수

-AddressMaskReply<AddressMaskReply[]>

Specifies an array of values for address mask reply. The cmdlet gets the IPv6 protocol configurations that have these values. Address mask reply specifies how the computer responds to ICMP address mask packets. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled. The computer responds to ICMP address mask packets.
-- Disabled. The computer does not respond to ICMP address mask packets.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-DefaultHopLimit<UInt32[]>

Specifies an array of values for the default hop limit. The cmdlet gets the IPv6 protocol configurations that have these values. The default hop limit is the default value for the CurrentHopLimit property in the IP interface. The current hop limit is the value that the IP interface writes in the time-to-live (TTL) field in all outbound traffic. When routers forward a packet, they decrement the hop limit by 1 and discard the packet when the hop limit is 0.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-DhcpMediaSense<DhcpMediaSense[]>

Specifies an array of values for Media Sense. The cmdlet gets IPv6 protocol configurations that have these values.

Media Sense provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP client to take an action, such as attempting to renew a DHCP lease or removing routes that are related to a disconnected network. When Media Sense is enabled, the network parameters on the laptop of a roaming user are automatically and transparently updated without requiring a restart when the user moves from one location to another. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled
-- Disabled

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-GroupForwardedFragments<GroupForwardedFragments[]>

Specifies an array of values for group forwarded fragments. The cmdlet gets IPv6 protocol configurations that have these values. Group forwarded fragments specifies whether the IP interface collects fragments into groups before it forwards the fragments. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled. The IP interface collects IPv4 protocol fragments into groups before it forwards the fragments.
-- Disabled. The IP interface does not collect IPv4 protocol fragments into groups before it forwards the fragments.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-IcmpRedirects<IcmpRedirects[]>

Specifies an array of values for ICMP redirects. The cmdlet gets IPv4 protocol configurations that have these values. ICMP redirects specifies whether to update the path cache in response to ICMP redirect packets. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled. The IP interface updates the path cache in response to ICMP redirect packets.
-- Disabled. The IP interface does not update the path cache in response to ICMP redirect packets.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MaxDadAttempts<UInt32[]>

Specifies an array of values for the maximum number of duplicate address detection attempts. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MaxPreferredLifetime<TimeSpan[]>

Specifies an array of values, as TimeSpan objects, for the maximum preferred lifetime over which to prefer a temporary address. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MaxRandomTime<TimeSpan[]>

Specifies an array of values, as TimeSpan objects, for the upper bound that the IP interface uses to compute a random delay at startup time. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MaxValidLifetime<TimeSpan[]>

Specifies an array of values, as TimeSpan objects, for the maximum lifetime over which a temporary address is valid. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MediaSenseEventLog<MediaSenseEventLog[]>

Specifies an array of values for Media Sense event log. The cmdlet gets IPv6 protocol configurations that have these values. Media Sense event log specifies whether the computer logs DHCP Media Sense events. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled. The IP interface logs DHCP Media Sense events in the event log for troubleshooting purposes.
-- Disabled. The IP interface does not log DHCP Media Sense events in the event log.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MldLevel<MldLevel[]>

Specifies an array of values for the level of Multicast Listener Discovery (MLD) support. The cmdlet gets IPv6 protocol configurations that have these values. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- All. The computer can send and receive multicast packets.
-- None. The computer cannot send or receive multicast packets.
-- SendOnly. The computer can send but not receive multicast packets.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MldVersion<MldVersion[]>

Specifies an array of values for the maximum version of Multicast Listener Discovery that the host supports. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-MulticastForwarding<MulticastForwarding[]>

Specifies an array of values for multicast forwarding. The cmdlet gets IPv6 protocol configurations that have these values. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled. The computer can forward multicast packets.
-- Disabled. The computer cannot forward multicast packets.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-NeighborCacheLimitEntries<UInt32[]>

Specifies an array of values for the maximum number of neighbor cache entries. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-RandomizeIdentifiers<RandomizeIdentifiers[]>

Specifies an array of values for the randomization of identifiers. The cmdlet gets IPv6 protocol configurations that have these values. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Enabled. The IP interface randomizes identifiers when it creates an IP address.
-- Disabled: The IP interface does not randomize identifiers when it creates an IP address.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ReassemblyLimitBytes<UInt32[]>

Specifies an array of values for the maximum size of the reassembly buffer. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-RegenerateTime<TimeSpan[]>

Specifies an array of values, as TimeSpan objects, for when the IP interface deprecates a temporary address before it generates a new address. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-RouteCacheLimitEntries<UInt32[]>

Specifies an array of values for the maximum number of route cache entries. The cmdlet gets IPv6 protocol configurations that have these values.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-SourceRoutingBehavior<SourceRoutingBehavior[]>

Specifies an array of values for the behavior for source-routed packets. The cmdlet gets IPv6 protocol configurations that have these values. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- DontForward. The computer can receive but not forward source-routed packets.
-- Drop. The computer drops source-routed packets.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-UseTemporaryAddresses<UseTemporaryAddresses[]>

Specifies an array of values for temporary addresses. The cmdlet gets IPv6 protocol configurations that have these values. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Always. The computer always generates temporary addresses by using random numbers.
-- Counter. The computer generates temporary addresses by using the interface identifier. You typically use this identifier for test purposes.
-- Disabled. The computer does not use temporary addresses.
-- Enabled. The computer uses temporary addresses.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

  • None

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIPv6Protocol

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

Example 1: Get all IPv6 protocol configurations

This command gets all IPv6 protocol configurations for the IP interface. The default output for the cmdlet does not include all properties of the NetIPv6Protocol object.

PS C:\> Get-NetIPv6Protocol

Example 2: Output all properties of IPv6 protocol configurations

This command gets all IPv6 protocol configurations for the IP interface. The command uses the Format-List cmdlet to display all the properties in the output in the form of a table. For more information, type Get-Help Format-Table.The command default output omits some properties.

PS C:\> Get-NetIPv6Protocol | Format-List –Property *

관련 항목

Set-NetIPv6Protocol

Get-NetIPv4Protocol