Remove-NetRoute
Remove-NetRoute
Removes IP routes from the IP routing table.
구문
Parameter Set: ByName
Remove-NetRoute [[-DestinationPrefix] <String[]> ] [-AddressFamily <AddressFamily[]> ] [-AsJob] [-AssociatedIPInterface <CimInstance> ] [-CimSession <CimSession[]> ] [-IncludeAllCompartments] [-InterfaceAlias <String[]> ] [-InterfaceIndex <UInt32[]> ] [-NextHop <String[]> ] [-PassThru] [-PolicyStore <String> ] [-PreferredLifetime <TimeSpan[]> ] [-Protocol <Protocol[]> ] [-Publish <Publish[]> ] [-RouteMetric <UInt16[]> ] [-ThrottleLimit <Int32> ] [-ValidLifetime <TimeSpan[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Remove-NetRoute -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Remove-NetRoute cmdlet removes IP routes from the IP routing table. Run this cmdlet without any parameters to remove all IP routes from the routing table, including default routes. You can also specify routes to remove by specifying parameters, or by using the Get-NetRoute cmdlet.
For more information about routing, see Chapter 5 - IP Routing (https://technet.microsoft.com/library/bb727001.aspx) in the TechNet library.
매개 변수
-AddressFamily<AddressFamily[]>
Specifies an array of IP address families of IP routes. The cmdlet removes IP routes that belong to the families that you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- IPv4
-- IPv6
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AssociatedIPInterface<CimInstance>
Specifies an IP interface as a CIM object. The cmdlet removes IP routes that belong to the interfaces that you specify. To obtain an IP interface, use the Get-NetIPInterface cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DestinationPrefix<String[]>
Specifies an array of destination prefixes of IP routes. The cmdlet removes IP routes that use the prefixes that you specify. A destination prefix contains an IP address prefix and a prefix length, separated by a slash (/). A value of 0.0.0.0/0 for IPv4 or ::/0 for IPv6 indicates that the value of the NextHop parameter is a default gateway.
별칭 |
없음 |
필수 여부 |
false |
위치 |
1 |
기본값 |
dhcp |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IncludeAllCompartments
Indicates that the cmdlet includes routes from all configured network compartments. If you do not specify this parameter, the cmdlet removes only routes in the default network compartment.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<CimInstance[]>
이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-InterfaceAlias<String[]>
Specifies an array of aliases of network interfaces. The cmdlet removes IP routes for the interfaces that have the aliases that you specify.
별칭 |
ifAlias |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InterfaceIndex<UInt32[]>
Specifies an array of indexes of network interfaces. The cmdlet removes IP routes for the interfaces located at the indexes that you specify.
별칭 |
ifIndex |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NextHop<String[]>
Specifies an array of next hop values. The cmdlet removes routes that have the next hop values that you specify. A value of 0.0.0.0 for IPv4 or :: for IPv6 indicates that the route is on the local subnet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PolicyStore<String>
Specifies a PolicyStore value. The cmdlet removes IP routes that have the PolicyStore value that you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- ActiveStore. The IP address information is valid.
-- PersistentStore. The computer saves IP address information across restarts. When the computer restarts, it copies the saved settings to the ActiveStore.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PreferredLifetime<TimeSpan[]>
Specifies an array of values for preferred lifetime, as TimeSpan objects, of IP routes. The cmdlet removes IP routes that have the lifetimes that you specify. To obtain a TimeSpan object, use the New-Timespan cmdlet. For more information, type Get-Help New-TimeSpan
.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Protocol<Protocol[]>
Specifies an array of types of routing protocols. The cmdlet removes IP routes that use the protocols that you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Bbn
-- Bgp
-- Dhcp
-- Dvmrp
-- Egp
-- Eigrp
-- EsIs
-- Ggp
-- Hello
-- Icmp
-- Idpr
-- Igrp
-- IsIs
-- Local
-- NetMgmt
-- Ospf
-- Rip
-- Rpl
-- Other
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Publish<Publish[]>
Specifies an array of publish settings of IP routes. The cmdlet removes IP routes that have the publish settings that you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- No. Do not publish or advertise IP route information in router advertisements.
-- Yes. Publish and advertise IP route information that includes an infinite valid lifetime in router advertisements
-- Age. Publish and advertise IP route information with a finite valid lifetime in router advertisements.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RouteMetric<UInt16[]>
Specifies an array of integer route metrics for IP routes. The cmdlet removes IP routes that have the metrics that you specify. To choose among multiple routes, the computer adds this value to the interface metric value. The computer selects the route with the lowest combined value. To modify the interface metric, use the Set-NetIPInterface cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ValidLifetime<TimeSpan[]>
Specifies an array of values for valid lifetime, as a TimeSpan object, for IP routes. The cmdlet removes IP routes that have the lifetime that you specify. To obtain a TimeSpan object, use the New-Timespan cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#rootStandardCimv2MSFT_NetRoute
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- None
예제
Example 1: Remove all routes
This command removes all of the IP routes on the computer, including default routes.
PS C:\> Remove-NetRoute
Example 2: Remove routes for a specified next hop
This command removes all of the IP routes that have a next hop of 192.168.0.1.
PS C:\> Remove-NetRoute –NextHop "192.168.0.1"