Get-NetUDPEndpoint
Get-NetUDPEndpoint
Gets current UDP endpoint statistics.
구문
Parameter Set: ByName
Get-NetUDPEndpoint [[-LocalAddress] <String[]> ] [[-LocalPort] <UInt16[]> ] [-CimSession <CimSession[]> ] [-CreationTime <DateTime[]> ] [-OwningProcess <UInt32[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Get-NetUDPEndpoint cmdlet gets current statistics for a UDP endpoint. The cmdlet returns UDP end point properties, such as local and remote UDP ports. If you do not specify any parameters, the cmdlet gets statistics for all UDP end points.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CreationTime<DateTime[]>
Specifies an array of DateTime objects. To get a DateTime object, use the Get-Date cmdlet.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-LocalAddress<String[]>
Specifies an array of local IP addresses. The cmdlet gets the UDP endpoint statistics that have these values.
별칭 |
IPAddress |
필수 여부 |
false |
위치 |
1 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalPort<UInt16[]>
Specifies an array of local ports. The cmdlet gets the UDP endpoint statistics that have these values.
별칭 |
none |
필수 여부 |
false |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-OwningProcess<UInt32[]>
Specifies the PID of the owning process of a bound UDP socket.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
- None
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetUDPEndpoint
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
예
Example 1: Get statistics for all UDP endpoints
This example gets current statistics for all UDP endpoints.
PS C:\> Get-NetUDPEndpoint
Example 2: Get statistics for UDP traffic
This command gets statistics for recent UDP traffic that was sent and received on the IPv4 loopback address.
PS C:\> Get-NetUDPEndpoint –LocalAddress 127.0.0.1