Set-NetRoute
Set-NetRoute
Modifies an entry or entries in the IP routing table.
구문
Parameter Set: ByName
Set-NetRoute [[-DestinationPrefix] <String[]> ] [-AddressFamily <AddressFamily[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeAllCompartments] [-InterfaceAlias <String[]> ] [-InterfaceIndex <UInt32[]> ] [-NextHop <String[]> ] [-PassThru] [-PolicyStore <String> ] [-PreferredLifetime <TimeSpan> ] [-Protocol <Protocol[]> ] [-Publish <Publish> ] [-RouteMetric <UInt16> ] [-ThrottleLimit <Int32> ] [-ValidLifetime <TimeSpan> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-NetRoute -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-PreferredLifetime <TimeSpan> ] [-Publish <Publish> ] [-RouteMetric <UInt16> ] [-ThrottleLimit <Int32> ] [-ValidLifetime <TimeSpan> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-NetRoute cmdlet modifies entries in the IP routing table. Specify routes to modify by using the DestinationPrefix parameter or the NextHop parameter. You can also specify routes by using the Get-NetRoute cmdlet. If you do not specify which routes to modify, the cmdlets modifies all of the routes on the computer.
IP routing is the process of forwarding a packet based on the destination IP address. Routing occurs at TCP/IP hosts and at IP routers. The sending host or router determines where to forward the packet. To determine where to forward a packet, the host or router consults a routing table that is stored in memory. When TCP/IP starts, it creates entries in the routing table. You can add entries either manually or automatically.
For more information about routing, see Chapter 5 - IP Routing (https://technet.microsoft.com/library/bb727001.aspx) in the TechNet library.
After you create an entry in the routing table, you cannot modify the destination prefix or the next hop value. If necessary, use the Remove-NetRoute cmdlet to remove the entry, and then recreate it with the desired values by using the New-NetRoute cmdlet.
매개 변수
-AddressFamily<AddressFamily[]>
Specifies an array of IP address families of IP routes. The cmdlet modifies the family that you specify for the IP route. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- IPv4
-- IPv6
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DestinationPrefix<String[]>
Specifies an array of destination prefixes of IP routes. The cmdlet modifies settings for this IP route. A destination prefix contains an IP address prefix and a prefix length, separated by a slash (/). A value of 0.0.0.0/0
for IPv4 or ::/0
for IPv6 indicates that the value of the NextHop parameter is a default gateway.
별칭 |
없음 |
필수 여부 |
false |
위치 |
1 |
기본값 |
dhcp |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IncludeAllCompartments
Indicates that the cmdlet includes routes from all configured network compartments. If you do not specify this parameter, the cmdlet modifies only routes in the default network compartment.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<CimInstance[]>
이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-InterfaceAlias<String[]>
Specifies an array of aliases of network interfaces. The cmdlet modifies IP routes for the interfaces that have the aliases that you specify.
별칭 |
ifAlias |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InterfaceIndex<UInt32[]>
Specifies an array of indexes of network interfaces. The cmdlet modifies IP routes for the interfaces located at the indexes that you specify.
별칭 |
ifIndex |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NextHop<String[]>
Specifies an array of next hop values. The cmdlet modifies the routes that have these values. A value of 0.0.0.0 for IPv4 or :: for IPv6 indicates that the route is on the local subnet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PolicyStore<String>
Specifies a PolicyStore value. The cmdlet changes the PolicyStore value to the value that you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- ActiveStore. The IP address information is valid.
-- PersistentStore. The computer saves IP address information across restarts. When the computer restarts, it copies the saved settings to the ActiveStore.
Specify ActiveStore only.
If you do not specify this parameter, the default entries are created in both the ActiveStore and the PersistentStore.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PreferredLifetime<TimeSpan>
Specifies a preferred lifetime, as a TimeSpan object, of an IP route. The cmdlet changes the lifetime to the value that you specify. To obtain a TimeSpan object, use the New-Timespan cmdlet. For more information, type Get-Help New-TimeSpan
.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Protocol<Protocol[]>
Specifies an array of types of routing protocols. The cmdlet changes the protocol to the value you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Bbn
-- Bgp
-- Dhcp
-- Dvmrp
-- Egp
-- Eigrp
-- EsIs
-- Ggp
-- Hello
-- Icmp
-- Idpr
-- Igrp
-- IsIs
-- Local
-- NetMgmt
-- Ospf
-- Rip
-- Rpl
-- Other
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Publish<Publish>
Specifies the publish setting of an IP route. The cmdlet changes the publish value to the value that you specify. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- No. Do not publish or advertise IP route information in router advertisements.
-- Yes. Publish and advertise IP route information with an infinite valid lifetime in router advertisements.
-- Age. Publish and advertise IP route information with a finite valid lifetime, in router advertisements. Specify a valid lifetime by using the ValidLifetime parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RouteMetric<UInt16>
Specifies an integer route metric for an IP route. The cmdlet changes the metric to the value that you specify. To choose among multiple routes, the computer adds this value to the interface metric value. The computer selects the route with the lowest combined value. To modify the interface metric, use the Set-NetIPInterface cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ValidLifetime<TimeSpan>
Specifies a valid lifetime, as a TimeSpan object, for an IP route. The cmdlet changes the lifetime to the value that you specify. To obtain a TimeSpan object, use the New-Timespan cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetPrefixPolicy
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- None
예제
Example 1: Change the route metric
This command changes the route metric to 257. This route is less preferred than routes that have the default value of 256.
PS C:\> Set-NetRoute –RouteMetric 257
Example 2: Modify the preferred lifetime
The first command uses the New-TimeSpan cmdlet to create a time span of one day, and then stores it in the $TimeSpan variable. For more information, type Get-Help New-TimeSpan
.
The second command changes the lifetime of the IP route that has the destination prefix 192.168.0.0/24. The command specifies the object stored in the $TimeSpan variable as the new preferred lifetime.
PS C:\> $TimeSpan = New-TimeSpan –Days 1
PS C:\> Set-NetRoute –DestinationPrefix "192.168.0.0/24" –PreferredLifetime $TimeSpan
관련 항목
New-TimeSpan