Get-NetUDPSetting
Get-NetUDPSetting
Gets UDP settings.
구문
Parameter Set: ByName
Get-NetUDPSetting [[-DynamicPortRangeStartPort] <UInt16[]> ] [[-DynamicPortRangeNumberOfPorts] <UInt16[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-NetUDPSetting cmdlet gets UDP settings for the IP interface. The cmdlet gets the starting port and the number of ports for a dynamic port range that the IP interface uses to send and receive UDP traffic. Use this cmdlet with the Set-NetUDPSetting to specify a dynamic port range to modify. If you do not specify any parameters, the cmdlet gets all dynamic port ranges for UDP from the IP interface.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DynamicPortRangeNumberOfPorts<UInt16[]>
Specifies an array of values for the number of ports for a dynamic port range that starts from the port that you specify for the DynamicPortRangeStartPort parameter. The cmdlet gets the UDP settings that have these values.
별칭 |
없음 |
필수 여부 |
false |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DynamicPortRangeStartPort<UInt16[]>
Specifies an array of values for the starting port of the dynamic port range. The cmdlet gets the UDP settings that have these values. 이 매개 변수에 허용되는 값은 다음과 같습니다.1 through 65535.
별칭 |
없음 |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetUDPSetting
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
Example 1: Get all dynamic port ranges for UDP
This command gets all UDP settings. The command gets all dynamic port ranges for UDP from the IP interface.
PS C:\> Get-NetUDPSetting