Remove-NetIPAddress
Remove-NetIPAddress
Removes an IP address and its configuration.
구문
Parameter Set: Query (cdxml)
Remove-NetIPAddress [[-IPAddress] <String[]> ] [-AddressFamily <AddressFamily[]> ] [-AddressState <AddressState[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-DefaultGateway <String> ] [-IncludeAllCompartments] [-InterfaceAlias <String[]> ] [-InterfaceIndex <UInt32[]> ] [-PassThru] [-PolicyStore <String> ] [-PreferredLifetime <TimeSpan[]> ] [-PrefixLength <Byte[]> ] [-PrefixOrigin <PrefixOrigin[]> ] [-SkipAsSource <Boolean[]> ] [-SuffixOrigin <SuffixOrigin[]> ] [-ThrottleLimit <Int32> ] [-Type <Type[]> ] [-ValidLifetime <TimeSpan[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Remove-NetIPAddress -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Remove-NetIPAddress cmdlet removes an IP address and its configuration. To remove a specific IP address object, use the IPv4 Address parameter or IPv6 Address parameter. If you do not specify an IPv4 or IPv6 address, the cmdlet will remove all IP addresses that match.
매개 변수
-AddressFamily<AddressFamily[]>
Specifies an array of IP address families. The cmdlet removes the IP address that matches the families. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- IPv4
-- IPv6
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AddressState<AddressState[]>
Specifies an array of duplicate address detection (DAD) state values for the IP address. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Invalid. IP address configuration information for addresses that are not valid and will not be used.
-- Tentative. IP address configuration information for addresses that are not used for communication, as the uniqueness of those IP addresses is being verified.
-- Duplicate. IP address configuration information for addresses for which a duplicate IP address has been detected and the current IP address will not be used.
-- Deprecated. IP address configuration information for addresses that will no longer be used to establish new connections, but will continue to be used with existing connections.
-- Preferred. IP address configuration information for addresses that are valid and available for use.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DefaultGateway<String>
Specifies the IPv4 address or IPv6 address of the default gateway for the host. Default gateways provide a default route for TCP/IP hosts to use when communicating with other hosts on remote networks.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IncludeAllCompartments
Indicates that the cmdlet includes addresses from all configured network compartments. If you do not specify this parameter, the cmdlet removes only addresses in the default network compartment.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<CimInstance[]>
이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-InterfaceAlias<String[]>
Specifies an array of aliases of network interfaces. The cmdlet removes IP addresses that match the aliases.
별칭 |
ifAlias |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InterfaceIndex<UInt32[]>
Specifies an array of indexes of network interfaces. The cmdlet removes IP addresses that match the indexes.
별칭 |
ifIndex |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IPAddress<String[]>
Specifies an array of IPv4 or IPv6 addresses.
별칭 |
LocalAddress |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PolicyStore<String>
Specifies a PolicyStore value. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- ActiveStore. The IP address information is valid.
-- PersistentStore. The computer saves IP address information across restarts. When the computer restarts, it copies the saved settings to the ActiveStore.
The default value is ActiveStore.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PreferredLifetime<TimeSpan[]>
Specifies an array of values of preferred lifetimes, as TimeSpan objects, for an IP address. To obtain a TimeSpan object, use the New-TimeSpan cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PrefixLength<Byte[]>
Specifies an array of prefix lengths. This parameter defines the local subnet size, and is also known as a subnet mask.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PrefixOrigin<PrefixOrigin[]>
Specifies an array of origins of address prefixes. IP addresses are divided into two parts, the prefix and the suffix. The address prefix identifies the network portion of an IP address, and the address suffix identifies the host portion. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Manual. The IP address prefix was manually specified.
-- WellKnown. The IP address prefix is from a well-known source.
-- DHCP. The IP address prefix was provided by DHCP settings.
-- RouterAdvertisement. The IP address prefix was obtained through a router advertisement (RA).
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SkipAsSource<Boolean[]>
Indicates whether an address is a primary IP address. This parameter identifies the primary IP address for outgoing traffic in a multiple IP address scenario. If this parameter is set to True, the addresses are not used for outgoing traffic and are not registered in DNS.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SuffixOrigin<SuffixOrigin[]>
Specifies an array of origins of address suffixes. IP addresses are divided into two parts, the prefix and the suffix. The address prefix identifies the network portion of an IP address, and the address suffix identifies the host portion. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Manual. The IP address prefix was manually specified.
-- WellKnown. The IP address suffix is from a well-known source.
-- DHCP. The IP address suffix was provided by DHCP settings.
-- Link. The IP address suffix was obtained from the link-layer address.
-- Random. The IP address suffix was obtained from a random source.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Type<Type[]>
Specifies an array of IP address types. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Unicast
-- Anycast
The default value is Unicast.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ValidLifetime<TimeSpan[]>
Specifies an array of values of valid lifetimes, as TimeSpan objects, for an IP address. To obtain a TimeSpan object, use the New-TimeSpan cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIPAddress
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- None
예제
Example 1: Remove an IP address
This command adds a new IP address.
PS C:\> New-NetIPAddress –InterfaceIndex 12 –IPAddress 192.168.0.1
This command removes the IP address created by the previous command.
PS C:\> Remove-NetIPAddress –IPAddress 192.168.0.1
Example 2: Remove an IP address using a pipeline
This command removes all of the IP addresses with the address 192.168.0.1.
PS C:\> Get-NetIPAddress –IPAddress 192.168.0.1 | Remove-NetIPAddress
Example 3: Remove IP addresses by prefix origin
This command removes all of the IP addresses that have a manually-configured prefix origin.
PS C:\> Remove-NetIPAddress –PrefixOrigin Manual