New-Cluster

New-Cluster

Creates a new failover cluster.

구문

Parameter Set: Default
New-Cluster [-Name] <String> [-AdministrativeAccessPoint <AdminAccessPoint> {None | ActiveDirectoryAndDns | Dns | ActiveDirectory} ] [-Force] [-IgnoreNetwork <StringCollection> ] [-Node <StringCollection> ] [-NoStorage] [-StaticAddress <StringCollection> ] [ <CommonParameters>]




자세한 설명

The New-Cluster cmdlet creates a new failover cluster. Before creating a cluster, the hardware (servers, networks, and storage) must be connected, and the validation tests must be run.

Use Test-Cluster to run the validation tests. The tests will confirm that the hardware and settings are compatible with failover clustering. There are multiple types of tests, including Inventory, System Configuration, Network, Storage, and other types of tests.

매개 변수

-AdministrativeAccessPoint<AdminAccessPoint>

Specifies the type of administrative access point that the cmdlet creates for the cluster. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- ActiveDirectoryAndDns. The cmdlet creates an administrative access point for the cluster. The administrative access point is registered in DNS and enabled in Active Directory 도메인 서비스.
-- Dns. The cmdlet creates an administrative access point for the cluster. The administrative access point is registered in DNS but is not enabled in Active Directory 도메인 서비스.
-- None. The cmdlet does not create an administrative access point for the cluster. Some clustered roles and functionality might not be available for a cluster that does not have an administrative access point. Also, you cannot use Failover Cluster Manager to manage a cluster that does not have an administrative access point.


별칭

aap

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-Force

사용자에게 확인 메시지를 표시하지 않고 명령을 강제 실행합니다.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-IgnoreNetwork<StringCollection>

Specifies one or more networks to ignore when running the cmdlet. Networks with DHCP enabled are always included, but other networks need a static address to be specified using the StaticAddress parameter or should be explicitly ignored with this IgnoreNetwork parameter.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-Name<String>

Specifies the name of the cluster to create.


별칭

none

필수 여부

true

위치

1

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-NoStorage

Specifies that shared storage is ignored during the cluster creation. The cluster created at the end of the operation will not have shared storage. Shared storage can later be added by piping the ClusterDiskInfo object from the Get-ClusterAvailableDisk cmdlet into the Add-ClusterDisk cmdlet.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-Node<StringCollection>

Specifies a comma-separated list of cluster node names, or server names, on which to create the cluster. If this parameter is not specified, then a one node cluster is created on the local physical computer.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

-StaticAddress<StringCollection>

Specifies one or more static addresses to use when running the cmdlet. Networks with DHCP enabled are always included, but other networks need a static address to be specified using the StaticAddress parameter or should be explicitly ignored with this IgnoreNetwork parameter.


별칭

none

필수 여부

false

위치

named

기본값

none

파이프라인 입력 허용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(http://go.microsoft.com/fwlink/p/?LinkID=113216)

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

  • None

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

  • Microsoft.FailoverClusters.PowerShell.Cluster

EXAMPLE 1

This example creates a four-node cluster named cluster1, using default settings for IP addressing.


PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4

EXAMPLE 2

This example creates a two-node cluster named cluster1. The cluster will not have any clustered storage, or disk resources. Storage can be added using the Get-ClusterAvailableDisk cmdlet with the Add-ClusterDisk cmdlet.


PS C:\> New-Cluster -Name cluster1 -Node node1,node2 -NoStorage

EXAMPLE 3

This example creates a four-node cluster named cluster1 that uses the static IP address 2.0.0.123.


PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -StaticAddress 2.0.0.123

EXAMPLE 4

This example creates a four-node cluster named cluster1 that uses the static IP addresses 2.0.0.123 and 3.0.0.123.


PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -StaticAddress 2.0.0.123,3.0.0.123

EXAMPLE 5

This example creates a four-node cluster named cluster1. The cluster uses default settings for IP addressing, and does not use the network 2.0.0.0/8.


PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -IgnoreNetwork 2.0.0.0/8

EXAMPLE 6

This example creates a four-node cluster named cluster1. The cluster uses the static IP address 2.0.0.123, and does not use the network 3.0.0.0/8.


PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -StaticAddress 2.0.0.123 -IgnoreNetwork 3.0.0.0/8

관련 항목

커뮤니티 추가 항목

추가
표시: