Add-ClusterGenericScriptRole
Add-ClusterGenericScriptRole
Configures an application controlled by a script that runs in Windows Script Host, within a failover cluster.
구문
Parameter Set: InputObject
Add-ClusterGenericScriptRole [[-Name] <String> ] -ScriptFilePath <String> [-Cluster <String> ] [-IgnoreNetwork <StringCollection> ] [-InputObject <PSObject> ] [-StaticAddress <StringCollection> ] [-Storage <StringCollection> ] [-Wait <Int32> ] [ <CommonParameters>]
자세한 설명
The Add-ClusterGenericScriptRole cmdlet configures an application controlled by a script that runs in Windows Script Host, within a failover cluster.
The script provides the cluster software with information about the current state of the application. As needed, the cluster software will restart or fail over the script (and through it, the application will be restarted or failed over).
Note 매개 변수를 사용하는 도메인의 DirectAccess에 대해서만 원격 액세스 에지 토폴로지에서 전체 설치를 수행하려면 다음을 실행합니다. 이 cmdlet은 서버 컴퓨터에서 CredSSP(자격 증명 보안 서비스 공급자) 인증 없이 원격으로 실행할 수 없습니다.
매개 변수
-Cluster<String>
Specifies the name of the cluster on which to run this cmdlet. If the input for this parameter is .
or it is omitted, then the cmdlet runs on the local cluster.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IgnoreNetwork<StringCollection>
Specifies one or more networks to ignore when running the cmdlet. Networks with DHCP enabled are always included, but other networks need a static address to be specified using the StaticAddress parameter or should be explicitly ignored with this IgnoreNetwork parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<PSObject>
Specifies the cluster on which to create the highly available script.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByValue) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of the highly available script to create.
별칭 |
없음 |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ScriptFilePath<String>
Specifies the path of the script file to use for the highly available script.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-StaticAddress<StringCollection>
Specifies one or more static addresses to use when running the cmdlet. Networks with DHCP enabled are always included, but other networks need a static address to be specified using the StaticAddress parameter or should be explicitly ignored with this IgnoreNetwork parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Storage<StringCollection>
Specifies the cluster disk resource to be added to the created highly available script.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Wait<Int32>
Specifies the time in seconds to wait for the cmdlet. If the Wait parameter is not specified, then the cmdlet waits for completion. If -Wait 0
is specified, then the call is initiated and the cmdlet returns without waiting.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- Microsoft.FailoverClusters.PowerShell.Cluster
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.FailoverClusters.PowerShell.ClusterGroup
예제
Example 1
This example configures the script named script1.vbs to run within a failover cluster, using defaults for the name and IP address, and does not assign a disk.
PS C:\> Add-ClusterGenericScriptRole -ScriptFilePath script1.vbs
Example 2
This example configures the script named script1.vbs to run within a failover cluster and use Cluster Disk 4. The cmdlet assigns the clustered script the name script1.
PS C:\> Add-ClusterGenericScriptRole -ScriptFilePath script1.vbs -Storage "Cluster Disk 4" -Name script1
Example 3
This example configures the script called script1.vbs to run within a failover cluster, using defaults for the name and IP address, and does not assign a disk. The cmdlet completes without waiting for all resources to come online.
PS C:\> Add-ClusterGenericScriptRole -ScriptFilePath script1.vbs -Wait 0