Set-DAEntryPointTableItem

Set-DAEntryPointTableItem

Modifies the configuration of a DirectAccess entry point stored in a Group Policy object.

구문

Parameter Set: ByPolicyStore
Set-DAEntryPointTableItem -PolicyStore <String> [-ADSite <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-EntryPointIPAddress <String> ] [-EntryPointName <String[]> ] [-EntryPointRange <String[]> ] [-GslbIP <String> ] [-IPHttpsProfile <String> ] [-PassThru] [-TeredoServerIP <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByGpoSession
Set-DAEntryPointTableItem -GPOSession <String> [-ADSite <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-EntryPointIPAddress <String> ] [-EntryPointName <String[]> ] [-EntryPointRange <String[]> ] [-GslbIP <String> ] [-IPHttpsProfile <String> ] [-PassThru] [-TeredoServerIP <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-DAEntryPointTableItem -InputObject <CimInstance[]> [-ADSite <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-EntryPointIPAddress <String> ] [-EntryPointRange <String[]> ] [-GslbIP <String> ] [-IPHttpsProfile <String> ] [-PassThru] [-TeredoServerIP <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

Set-DAEntryPointTableItem modifies an entry point configuration that is stored in a Group Policy object (GPO). You must specifiy the name of the GPO in which the DirectAccess entry point configuration is stored.

매개 변수

-ADSite<String>

Specifies the Active Directory Domain Services (AD DS) site name associated with the entry point. When a client computer connects to an entry point, the computer becomes associated with the AD DS site specified.

-AsJob

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-EntryPointIPAddress<String>

Specifies the IPv6 address of the entry point to use for connectivity. The cmdlet fails if the IP address specified is not within the IP address range specified by EntryPointRange.

-EntryPointName<String[]>

Specifies the name of the entry point to modify. The entry point name is usually the friendly name of the location, such as "Redmond" or "Paris".

Specify the name of the entry point by using double quotes ( “ ”).

-EntryPointRange<String[]>

Specifies the IPv6 address range associated with computers connecting through this entry point. Specify the IPv6 range in classless inter-domain routing (CIDR) notation.

The following is an example of an EntryPointRange entry:
{2001:4898:e0:305d::100:1/128, 2001:4898:e0:305d::100:2/128, 2001:4898:e0:3084::/64}

-GPOSession<String>

Specifies the Group Policy session to send configuration information. You can use GPOSession with the NetGPO cmdlets to aggregate multiple operations performed on a Group Policy Object.

GPOSession cannot be used in conjunction with PolicyStore.

-GslbIP<String>

Specifies the IP address associated with the new entry point, if using DirectAccess in conjunction with global server load balancing (GSLB) site balancing.

-InputObject<CimInstance[]>

Specifies the name of the object which contains the entry point to modify.

-IPHttpsProfile<String>

Specifies the IPHTTPs profile name to be used for connectivity. You specify the name of the profile in double quotes (“ “).New-DAEntryPointTableItem fails if the profile does not already exist in the GPO that contains the configuration. For more information about IPHTTPs profiles, see the NetIPHTTPsConfiguration cmdlets in the NetworkTransition module.

-PassThru

Sends items from an interactive window down the pipeline as input to other cmdlets. By default, this cmdlet does not generate any output. However, to send items from the interactive window down the pipeline, click to select the items and then click OK. Shift-click and Ctrl-click are supported.

-PolicyStore<String>

Specifies the policy store into which the cmdlet adds the entry point.

To add the entry point to a Group Policy Object, specify the GPO name using the following format: "Domain\GPOName"

To add the entry point information to a computer’s local GPO, specify the computer’s local GPO name in the following format: "GPO:<computername>"

PolicyStore cannot be used in conjunction with GPOSession.

-TeredoServerIP<String>

Specifies the IP address of the Teredo server for the new entry point.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root/StandardCimv2/MSFT_DASiteTableEntry

  This cmdlet returns a CIM object which contains the DA entry point table item.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• This cmdlet produces no output.

예제

Example 1: Modify an entry point

This cmdlet modifies the GSLB of the entry point named Paris.

PS C:\> Set-DAEntryTableItem -EntryPointName "Paris" -GslbIP 131.107.0.1 -PolicyStore "Contoso\GPO1"

Example 2: Modify an entry point using an input object

This cmdlet modifies an entry point named Paris by passing an input object on the pipeline.

PS C:\> $x = Set-DAEntryTableItem -EntryPointName "Paris" -PolicyStore "Contoso\GPO1"
PS C:\> $x.GslbIP = 131.107.0.1
PS C:\> $x | Set-DAEntryTableItem

관련 항목

New-DAEntryPointTableItem

Get-DAEntryPointTableItem

Reset-DAEntryPointTableItem

Rename-DAEntryPointTableItem

Remove-DAEntryPointTableItem