Set-DedupVolume

Set-DedupVolume

Changes data deduplication settings on one or more volumes.

구문

Parameter Set: Query (cdxml)
Set-DedupVolume [-Volume] <String[]> [-AsJob] [-ChunkRedundancyThreshold <UInt32> ] [-CimSession <CimSession[]> ] [-ExcludeFileType <String[]> ] [-ExcludeFileTypeDefault <String[]> ] [-ExcludeFolder <String[]> ] [-MinimumFileAgeDays <UInt32> ] [-MinimumFileSize <UInt32> ] [-NoCompress <Boolean> ] [-NoCompressionFileType <String[]> ] [-OptimizeInUseFiles] [-OptimizePartialFiles] [-PassThru] [-ThrottleLimit <Int32> ] [-Verify <Boolean> ] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-DedupVolume -InputObject <CimInstance[]> [-AsJob] [-ChunkRedundancyThreshold <UInt32> ] [-CimSession <CimSession[]> ] [-ExcludeFileType <String[]> ] [-ExcludeFileTypeDefault <String[]> ] [-ExcludeFolder <String[]> ] [-MinimumFileAgeDays <UInt32> ] [-MinimumFileSize <UInt32> ] [-NoCompress <Boolean> ] [-NoCompressionFileType <String[]> ] [-OptimizeInUseFiles] [-OptimizePartialFiles] [-PassThru] [-ThrottleLimit <Int32> ] [-Verify <Boolean> ] [ <CommonParameters>]

자세한 설명

The Set-DedupVolume cmdlet changes data deduplication settings on one or more volumes.

매개 변수

-AsJob

-ChunkRedundancyThreshold<UInt32>

Specifies the number of identical chunks of data that the deduplication engine encounters before the server creates a redundant copy of the data chunk. This increases the reliability of the server by adding redundancy to the most referenced chunks of data.

Deduplication detects corruptions and the deduplication scrubbing job restores the corrupted chunks from a redundant copy, if it is available. The default value is 100. The minimum value that you can set is 20. A low value for the ChunkRedundancyThreshold parameter reduces the effectiveness of data deduplication by creating more redundant copies of a chunk, and consumes more memory and disk space.

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-ExcludeFileType<String[]>

Specifies an array of extension types that the deduplication engine excludes from data deduplication and optimization. Specify comma-separated values that are not preceded with a period (.). When you change this setting, you override the existing values.

-ExcludeFileTypeDefault<String[]>

Specifies an array of file extension types, as strings, that the server does not optimize.

The Enable-DedupVolume cmdlet modifies this behavior, depending on the value of the UsageType parameter. If you use the current parameter to modify this behavior, and then run Enable-DedupVolume again, that cmdlet overrides your changes.

-ExcludeFolder<String[]>

Specifies an array of names of root folders under which all files are skipped during data deduplication. Full paths are accepted, however mount points are ignored since the mount point can change after configuration. When you change this setting, you override the existing values.

-InputObject<CimInstance[]>

이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.

-MinimumFileAgeDays<UInt32>

Specifies a number of days. The deduplication engine optimizes files that users have not accessed in the number of days that you specify. If the last access time is not available, then the deduplication engine uses the last modified time.

-MinimumFileSize<UInt32>

Specifies the minimum size threshold, in bytes, for files that are optimized. The deduplication engine does not optimize files that do not meet the minimum threshold.

-NoCompress<Boolean>

Indicates whether or not the server compresses data after deduplication. Compression uses more processor cycles but provides additional space savings.

-NoCompressionFileType<String[]>

Specifies an array of file types that the deduplication engine excludes from compression. These file types are deduplicated but not compressed, typically because the file format is already compressed. Specify comma-separated values that are not preceded with a period (.). When you change this setting, you override the existing values.

-OptimizeInUseFiles

Indicates that the server attempts to optimize currently open files. After specifying this parameter, the server may wait up to 15 mines before it attempts to optimize open files.

Enable-DedupVolume modifies this behavior, depending on the value of the UsageType parameter. If you use the current parameter to modify this behavior, and then run Enable-DedupVolume again, that cmdlet overrides your changes.

-OptimizePartialFiles

Indicates that the server optimizes all files, including portions of files that are old enough, according to the value of the MinimumFileAgeDays parameter.

Enable-DedupVolume modifies this behavior, depending on the value of the UsageType parameter. If you use the current parameter to modify this behavior, and then run Enable-DedupVolume again, that cmdlet overrides your changes.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-Verify<Boolean>

Indicates whether or not the deduplication engine performs a byte-for-byte verification for each duplicate chunk that optimization creates, rather than relying on a cryptographically strong hash. We do not recommend that you use this parameter. Setting this parameter to $True can degrade optimization performance.

-Volume<String[]>

Specifies an array of system volumes. Specify one or more volume IDs, drive letters (such as D:), or volume GUID pathnames (using the form \\?\Volume{{GUID}}\). Separate multiple volumes with a comma.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• System.String[]

• Microsoft.Management.Infrastructure.CimInstance#

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Deduplication/MSFT_DedupVolume

예제

Example 1: Set the exclude folders on a volume

This command sets the root folders under which all files are skipped during data deduplication. The ExcludeFolder parameter specifies that the data deduplication engine processes the files in all of the folders on volume F: except for files in the Temp folder and the SQL folder.

PS C:\> Set-DedupVolume –Volume F: -ExcludeFolder F:\temp,F:\SQL

Example 2: Set the minimum file age on a volume

This command sets the number of days since users have accessed a file before the deduplication engine optimizes the file. The MinimumFileAgeDays parameter specifies that the data deduplication engine processes the files in all of the folders on volume E: that were not accessed in the last 10 days.

PS C:\> Set-DedupVolume -Volume E: –MinimumFileAgeDays 10

Example 3: Set the chunk redundancy threshold on a volume

This command sets the number of identical chunks of data that the deduplication engine encounters during deduplication before the server creates a redundant copy of the data chunk. The MinimumFileAgeDays parameter specifies that the data deduplication engine processes the files in all of the folders on volume D: that were not accessed in the last 15 days. The ChunkRedundancyThreshold parameter specifies that if the data deduplication engine discovers 50 chunks of identical data, it makes one redundant copy as a safeguard.

PS C:\> Set-DedupVolume –Volume D: -MinimumFileAgeDays 15 –ChunkRedundancyThreshold 50

관련 항목

Disable-DedupVolume

Enable-DedupVolume

Get-DedupVolume