Add-VMHardDiskDrive
Add-VMHardDiskDrive
Adds a hard disk drive to a virtual machine.
구문
Parameter Set: VMName
Add-VMHardDiskDrive [-VMName] <String[]> [[-ControllerType] <ControllerType> ] [[-ControllerNumber] <Int32> ] [[-ControllerLocation] <Int32> ] [[-Path] <String> ] [-AllowUnverifiedPaths] [-ComputerName <String[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64> ] [-MinimumIOPS <UInt64> ] [-Passthru] [-ResourcePoolName <String> ] [-SupportPersistentReservations] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: VMDriveController
Add-VMHardDiskDrive [-VMDriveController] <VMDriveController> [[-ControllerLocation] <Int32> ] [[-Path] <String> ] [-AllowUnverifiedPaths] [-ComputerName <String[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64> ] [-MinimumIOPS <UInt64> ] [-Passthru] [-ResourcePoolName <String> ] [-SupportPersistentReservations] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: VMObject
Add-VMHardDiskDrive [-VM] <VirtualMachine[]> [[-ControllerType] <ControllerType> ] [[-ControllerNumber] <Int32> ] [[-ControllerLocation] <Int32> ] [[-Path] <String> ] [-AllowUnverifiedPaths] [-ComputerName <String[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64> ] [-MinimumIOPS <UInt64> ] [-Passthru] [-ResourcePoolName <String> ] [-SupportPersistentReservations] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-VMHardDiskDrive cmdlet adds a hard disk drive to a virtual machine.
매개 변수
-ComputerName<String[]>
Specifies one or more virtual machine hosts on which the hard disk drive is to be added. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer — use “localhost” or a dot (“.”) to specify the local computer explicitly.
별칭 |
PSComputerName |
필수 여부 |
false |
위치 |
named |
기본값 |
. |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ControllerLocation<Int32>
Specifies the number of the location on the controller at which the hard disk drive is to be added. If not specified, the first available location in the controller specified with the ControllerNumber parameter is used.
별칭 |
없음 |
필수 여부 |
false |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ControllerNumber<Int32>
Specifies the number of the controller to which the hard disk drive is to be added. If not specified, this parameter assumes the value of the first available controller at the location specified in the ControllerLocation parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ControllerType<ControllerType>
Specifies the type of the controller to which the hard disk drive is to be added. If not specified, IDE is attempted first. If the IDE controller port at the specified number and location is already connected to a drive, then it will try to create one on the SCSI controller specified by ControllerNumber. Allowed values are IDE and SCSI.
별칭 |
없음 |
필수 여부 |
false |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Passthru
Passes the added Microsoft.HyperV.PowerShell.HardDiskDrive object through to the pipeline.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Path<String>
Specifies the full path of the hard disk drive file to be added.
별칭 |
없음 |
필수 여부 |
false |
위치 |
5 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ResourcePoolName<String>
Specifies the friendly name of the ISO resource pool to which this virtual hard disk is to be associated.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SupportPersistentReservations
Indicates that the hard disk supports SCSI persistent reservation semantics. Specify this parameter when the hard disk is a shared disk that is used by multiple virtual machines.
별칭 |
ShareVirtualDisk |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VM<VirtualMachine[]>
Specifies the virtual machine to which the hard disk drive is to be added.
별칭 |
없음 |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-VMDriveController<VMDriveController>
Specifies the controller to which the hard disk drive is to be added.
별칭 |
없음 |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-VMName<String[]>
Specifies the name of the virtual machine to which the hard disk drive is to be added.
별칭 |
없음 |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-AllowUnverifiedPaths
Specifies that no error is to be thrown if the specified path is not verified as accessible by the cluster. This parameter is applicable to clustered virtual machines.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DiskNumber<UInt32>
Specifies the disk number of the offline physical hard drive to be connected as a passthrough disk.
별칭 |
Number |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-MaximumIOPS<UInt64>
Specifies the maximum normalized I/O operations per second (IOPS) for the hard disk. Hyper-V calculates normalized IOPS as the total size of I/O per second divided by 8 KB.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MinimumIOPS<UInt64>
Specifies the minimum normalized I/O operations per second (IOPS) for the hard disk. Hyper-V calculates normalized IOPS as the total size of I/O per second divided by 8 KB.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- Microsoft.HyperV.Powershell.DriveController[]
- Microsoft.HyperV.Powershell.VirtualMachine[]
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- None by default; Microsoft.HyperV.PowerShell.HardDiskDrive if –PassThru is specified.
예제
Example 1
Creates a virtual hard disk using file D:\VHDs\disk1.vhdx on virtual machine Test.
PS C:\> Add-VMHardDiskDrive -VMName Test -Path D:\VHDs\disk1.vhdx
Example 2
Adds a virtual hard disk to SCSI controller number 0 on virtual machine Test.
PS C:\> Get-VM Test | Add-VMHardDiskDrive –ControllerType SCSI -ControllerNumber 0
Example 3
This example gets a SCSI controller on a virtual machine named Test and then adds physical disk 2 to that controller.
PS C:\> Get-VMScsiController –VMName Test –Number 0 | Add-VMHardDiskDrive –DiskNumber 2
Example 4
This example gets physical disk 2 and then adds it to a virtual machine named Test.
PS C:\> Get-Disk 2 | Add-VMHardDiskDrive –VMName Test