Enable-VMResourceMetering
Enable-VMResourceMetering
Collects resource utilization data for a virtual machine or resource pool.
구문
Parameter Set: ResourcePool
Enable-VMResourceMetering [-ResourcePoolName] <String> [[-ResourcePoolType] <VMResourcePoolType> {Memory | Processor | Ethernet | VHD | ISO | VFD | FibreChannelPort | FibreChannelConnection | PciExpress} ] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [ <CommonParameters>]
Parameter Set: VMName
Enable-VMResourceMetering [-VMName] <String[]> [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [ <CommonParameters>]
Parameter Set: VMObject
Enable-VMResourceMetering [-VM] <VirtualMachine[]> [ <CommonParameters>]
자세한 설명
The Enable-VMResourceMetering cmdlet starts collecting resource utilization data for a virtual machine or resource pool.
You can use the Measure-VM or Measure-VMResourcePool cmdlet to obtain this data.
If resource metering is enabled but no NetworkAdapterAcls are configured, Hyper-V configures them to measure total network traffic. To measure network traffic through an IP range, configure the NetworkAdapterAcls for the IP range before calling this cmdlet. (See Add-VMNetworkAdapterAcl for more information.)
매개 변수
-CimSession<Microsoft.Management.Infrastructure.CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String[]>
Specifies the virtual machine host or hosts on which resource utilization data collection is to be enabled. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Credential<System.Management.Automation.PSCredential[]>
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ResourcePoolName<String>
Specifies the friendly name of the resource pool for which you want to collect resource utilization data.
별칭 |
Name |
필수 여부 |
true |
위치 |
1 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ResourcePoolType<VMResourcePoolType>
Specifies the resource type of the resource pool for which you want to collect resource utilization data.
별칭 |
none |
필수 여부 |
false |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-VM<VirtualMachine[]>
Specifies the virtual machine for which you want to collect resource utilization data.
별칭 |
none |
필수 여부 |
true |
위치 |
1 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-VMName<String[]>
Specifies the friendly name of the virtual machine for which you want to collect resource utilization data.
별칭 |
none |
필수 여부 |
true |
위치 |
1 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
- Microsoft.HyperV.PowerShell.VirtualMachine[]
- Microsoft.HyperV.PowerShell.VMResourcePoolType
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
- None
예
Example 1
This example starts collecting resource utilization data on a virtual machine named TestVM.
PS C:\> Enable-VMResourceMetering –VMName TestVM
Example 2
This example starts collecting resource utilization data on a resource pool named TestResourcePool. (You can determine whether resource metering is enabled for a resource pool by querying its ResourceMeteringEnabled property.)
PS C:\> Get-VM TestVM | Enable-VMResourceMetering
PS C:\> Get-VM TestVM | Format-List Name,ResourceMeteringEnabled
Example 3
This example uses two commands that show resource metering being enabled and then obtain the data. The first command starts collecting resource utilization data for a memory resource pool named TestResourcePool. (You can determine whether resource metering is enabled for a resource pool by querying its ResourceMeteringEnabled property.) The second command retrieves the data in and formats it as a list.
PS C:\> Enable-VMResourceMetering –ResourcePoolName TestResourcePool –ResourcePoolType Memory
PS C:\> Get-VMResourcePool -Name TestResourcePool –ResourcePoolType Memory | Format-List Name,ResourceMeteringEnabled
Example 4
This example begins collecting resource utilization data on multiple resource pools with the name TestResourcePool.
PS C:\> Enable-VMResourceMetering –Name TestResourcePool –ResourcePoolType @("Processor","VHD","Ethernet","Memory")