Set-VMSwitch
Set-VMSwitch
Configures a virtual switch.
구문
Parameter Set: SwitchName_SwitchType
Set-VMSwitch [-Name] <String[]> [-AllowManagementOS <Boolean> ] [-ComputerName <String[]> ] [-DefaultFlowMinimumBandwidthAbsolute <Int64> ] [-DefaultFlowMinimumBandwidthWeight <Int64> ] [-Extensions <VMSwitchExtension[]> ] [-Notes <String> ] [-Passthru] [-SwitchType <VMSwitchType> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchName_NetAdapterInterfaceDescription
Set-VMSwitch [-Name] <String[]> [-NetAdapterInterfaceDescription] <String> [-AllowManagementOS <Boolean> ] [-ComputerName <String[]> ] [-DefaultFlowMinimumBandwidthAbsolute <Int64> ] [-DefaultFlowMinimumBandwidthWeight <Int64> ] [-Extensions <VMSwitchExtension[]> ] [-Notes <String> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchName_NetAdapterName
Set-VMSwitch [-Name] <String[]> [-NetAdapterName] <String> [-AllowManagementOS <Boolean> ] [-ComputerName <String[]> ] [-DefaultFlowMinimumBandwidthAbsolute <Int64> ] [-DefaultFlowMinimumBandwidthWeight <Int64> ] [-Extensions <VMSwitchExtension[]> ] [-Notes <String> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchObject_NetAdapterInterfaceDescription
Set-VMSwitch [-VMSwitch] <VMSwitch[]> [-NetAdapterInterfaceDescription] <String> [-AllowManagementOS <Boolean> ] [-ComputerName <String[]> ] [-DefaultFlowMinimumBandwidthAbsolute <Int64> ] [-DefaultFlowMinimumBandwidthWeight <Int64> ] [-Extensions <VMSwitchExtension[]> ] [-Notes <String> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchObject_NetAdapterName
Set-VMSwitch [-VMSwitch] <VMSwitch[]> [-NetAdapterName] <String> [-AllowManagementOS <Boolean> ] [-ComputerName <String[]> ] [-DefaultFlowMinimumBandwidthAbsolute <Int64> ] [-DefaultFlowMinimumBandwidthWeight <Int64> ] [-Extensions <VMSwitchExtension[]> ] [-Notes <String> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchObject_SwitchType
Set-VMSwitch [-VMSwitch] <VMSwitch[]> [-AllowManagementOS <Boolean> ] [-ComputerName <String[]> ] [-DefaultFlowMinimumBandwidthAbsolute <Int64> ] [-DefaultFlowMinimumBandwidthWeight <Int64> ] [-Extensions <VMSwitchExtension[]> ] [-Notes <String> ] [-Passthru] [-SwitchType <VMSwitchType> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-VMSwitch cmdlet configures a virtual switch.
매개 변수
-AllowManagementOS<Boolean>
Specifies whether the management operating system can use the physical network adapter that is bound to the external virtual switch.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String[]>
Specifies one or more Hyper-V hosts on which the virtual switch is to be configured. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer — use “localhost” or a dot (“.”) to specify the local computer explicitly.
별칭 |
PSComputerName |
필수 여부 |
false |
위치 |
named |
기본값 |
. |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DefaultFlowMinimumBandwidthAbsolute<Int64>
Specifies the minimum bandwidth, in bits per second, that is allocated to a special category called “default flow.” Any traffic sent by a virtual network adapter that is connected to this virtual switch and does not have minimum bandwidth allocated is filtered into this category. Specify a value for this parameter only if the minimum bandwidth mode on this virtual switch is absolute (See the New-VMSwitch cmdlet). By default, the virtual switch allocates 10% of the total bandwidth, which depends on the physical network adapter it binds to, to this category. For example, if a virtual switch binds to a 1 GbE network adapter, this special category can use at least 100 Mbps. If the value is not a multiple of 8, the value is rounded down to the nearest number that is a multiple of 8. For example, a value input as 1234567 is converted to 1234560.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DefaultFlowMinimumBandwidthWeight<Int64>
Specifies the minimum bandwidth, in relative weight, that is allocated to a special category called “default flow”. Any traffic sent by a virtual network adapter that is connected to this virtual switch and doesn’t have minimum bandwidth allocated is filtered into this category. Specify a value for this parameter only if the minimum bandwidth mode on this virtual switch is weight (See the New-VMSwitch cmdlet). By default, this special category has a weight of 1.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
10 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Extensions<VMSwitchExtension[]>
Specifies an ordered list of network extensions used to reorder the bindings on the virtual switch.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String[]>
Specifies the name of the virtual switch to be configured.
별칭 |
SwitchName |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Notes<String>
Specifies notes to be associated with the virtual switch.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Passthru
Specifies that a Microsoft.HyperV.PowerShell.EthernetSwitch object is to be passed through to the pipeline representing the virtual switch to be configured.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SwitchType<VMSwitchType>
Converts a virtual switch from one type to another. Allowed values are Internal or Private. You can convert an internal or private virtual switch to an external virtual switch, by including either the NetAdapterInterfaceDescription or NetAdapterName parameter in the command. If you do this, the external virtual switch is configured to allow the management operating system to share access to the physical network adapter. To override this behavior, include AllowManagementOs $false in the command.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VMSwitch<VMSwitch[]>
Specifies the virtual switch to be configured.
별칭 |
없음 |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-NetAdapterInterfaceDescription<String>
Specifies the interface description of the physical network adapter to which an external virtual switch should be bound. If you specify this parameter to convert a virtual switch, the external virtual switch is configured to allow the management operating system to share access to the physical network adapter. To override this behavior, include AllowManagementOs $false in the command
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NetAdapterName<String>
Specifies the name of the physical network adapter to which an external virtual switch should be bound. If you specify this parameter to convert a virtual switch, the external virtual switch is configured to allow the management operating system to share access to the physical network adapter. To override this behavior, include AllowManagementOs $false in the command
별칭 |
InterfaceAlias |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- None by default; Microsoft.HyperV.PowerShell.EthernetSwitch if –PassThru is specified.
예제
Example 1
This example converts a virtual switch named WA to an Internal switch.
PS C:\> Set-VMSwitch WA –SwitchType Internal
Example 2
This example sets the minimum bandwidth allocation to 500Mbps on a virtual switch named CA for all virtual machines without explicit minimum bandwidth configuration.
PS C:\> Set-VMSwitch CA –DefaultFlowMinimumBandwidthAbsolute 500000000