Remove-VMNetworkAdapterAcl

Remove-VMNetworkAdapterAcl

Removes an ACL applied to the traffic through a virtual network adapter.

구문

Parameter Set: VMName
Remove-VMNetworkAdapterAcl [-VMName] <String[]> -Action <VMNetworkAdapterAclAction> -Direction <VMNetworkAdapterAclDirection> [-ComputerName <String[]> ] [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObjectParameter
Remove-VMNetworkAdapterAcl [-InputObject] <VMNetworkAdapterAclSetting[]> [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ManagementOS
Remove-VMNetworkAdapterAcl -Action <VMNetworkAdapterAclAction> -Direction <VMNetworkAdapterAclDirection> -ManagementOS [-ComputerName <String[]> ] [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ResourceObject
Remove-VMNetworkAdapterAcl [-VMNetworkAdapter] <VMNetworkAdapterBase[]> -Action <VMNetworkAdapterAclAction> -Direction <VMNetworkAdapterAclDirection> [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: VMObject
Remove-VMNetworkAdapterAcl [-VM] <VirtualMachine[]> -Action <VMNetworkAdapterAclAction> -Direction <VMNetworkAdapterAclDirection> [-LocalIPAddress <String[]> ] [-LocalMacAddress <String[]> ] [-Passthru] [-RemoteIPAddress <String[]> ] [-RemoteMacAddress <String[]> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Remove-VMNetworkAdapterAcl cmdlet removes an ACL applied to the traffic through a virtual network adapter.

매개 변수

-Action<VMNetworkAdapterAclAction>

Specifies the action of the ACL to be removed. Allowed values are Allow, Deny, and Meter.

-ComputerName<String[]>

Specifies one or more Hyper-V hosts on which the ACL applied to a virtual machine network adapter is to be removed. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer — use “localhost” or a dot (“.”) to specify the local computer explicitly.

-Direction<VMNetworkAdapterAclDirection>

The direction of the network traffic (from the perspective of the virtual machine) to which the ACL applies. Allowed values are Inbound, Outbound, or Both.

-InputObject<VMNetworkAdapterAclSetting[]>

Specifies the ACL to be removed.

-LocalIPAddress<String[]>

Specifies the local IP address. It can be either IPv4 or IPv6 address. It can be either a host address or a subnet address, e.g. 1.2.3.4, 2001::2008, 192.168.1.0/24, or f001:f002:f003:f004::1/64.the IP address can also be a wildcard, 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.

-LocalMacAddress<String[]>

Specifies the local MAC address (e.g. 00-ab-00-11-22-33). Use the wildcard ANY to specify all MAC addresses.

-ManagementOS

Specifies that the ACL is to be removed from the management (e.g. the parent, or host) operating system.

-Passthru

Specifies that a Microsoft.HyperV.PowerShell.VMNetworkAdapterAclSetting object is to be passed through to the pipeline representing the ACL to be removed.

-RemoteIPAddress<String[]>

Specifies the remote IP address. . It can be either IPv4 or IPv6 address. It can be either a host address or a subnet address, e.g. 1.2.3.4, 2001::2008, 192.168.1.0/24, or f001:f002:f003:f004::1/64. the IP address can also be a wildcard, 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.

-RemoteMacAddress<String[]>

Specifies the remote MAC address. . It can be a host MAC address, e.g. 00-ab-00-11-22-33, or a wildcard, ANY, for all MAC addresses.

-VM<VirtualMachine[]>

Specifies the virtual machine from which the ACL is to be removed.

-VMName<String[]>

Specifies the name of the virtual machine from which the ACL is to be removed.

-VMNetworkAdapter<VMNetworkAdapterBase[]>

Specifies the virtual machine network adapter from which ACL is to be removed.

-VMNetworkAdapterName<String>

Specifies the name of the virtual machine network adapter from which the ACL is to be removed.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• None by default, Microsoft.HyperV.PowerShell.VMNetworkAdapterAclSetting if –PassThru is specified.

예제

Example 1

Removes from virtual machine Redmond the ACL allowing any IPv4 traffic sent from or to the virtual machine.

PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteIPAddress 0.0.0.0/0 -Direction Both -Action Allow

Example 2

Removes from virtual machine Redmond the ACL that allows any IPv6 traffic sent from and to the virtual machine.

PS C:\> Remove-VMNetworkAdapterAcl –VMName Redmond -RemoteIPAddress ::/0 -Direction Both -Action Allow

Example 3

Removes the MAC ACL to prevent virtual machine Redmond from sending traffic to or receiving traffic from a remote device with MAC address 03-0f-01-0e-aa-b2.

PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteMacAddress 03-0f-01-0e-aa-b2 -Direction Both -Action Deny

Example 4

Retrieves all the port ACLs configured for virtual machine Redmond and pipelines them to Remove-VMNetworkAdapterAcl, which removes all of them from the virtual machine.

PS C:\> Get-VMNetworkAdapterAcl -VMName Redmond | Remove-VMNetworkAdapterAcl