Set-VMHardDiskDrive
Set-VMHardDiskDrive
Configures a virtual hard disk.
구문
Parameter Set: VMName
Set-VMHardDiskDrive [-VMName] <String> [[-ControllerType] <ControllerType> {IDE | SCSI} ] [[-ControllerNumber] <Int32]> ] [[-ControllerLocation] <Int32]> ] [[-Path] <String> ] [-AllowUnverifiedPaths] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64]> ] [-MinimumIOPS <UInt64]> ] [-Passthru] [-QoSPolicy <Microsoft.Management.Infrastructure.CimInstance> ] [-QoSPolicyID <System.String> ] [-ResourcePoolName <String> ] [-SupportPersistentReservations <Boolean]> ] [-ToControllerLocation <Int32]> ] [-ToControllerNumber <Int32]> ] [-ToControllerType <ControllerType]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: Object
Set-VMHardDiskDrive [-VMHardDiskDrive] <HardDiskDrive[]> [[-Path] <String> ] [-AllowUnverifiedPaths] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-DiskNumber <UInt32> ] [-MaximumIOPS <UInt64]> ] [-MinimumIOPS <UInt64]> ] [-Passthru] [-QoSPolicy <Microsoft.Management.Infrastructure.CimInstance> ] [-QoSPolicyID <System.String> ] [-ResourcePoolName <String> ] [-SupportPersistentReservations <Boolean]> ] [-ToControllerLocation <Int32]> ] [-ToControllerNumber <Int32]> ] [-ToControllerType <ControllerType]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-VMHardDiskDrive cmdlet configures a virtual hard disk.
매개 변수
-CimSession<Microsoft.Management.Infrastructure.CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String[]>
Specifies one or more Hyper-V hosts on which the virtual hard drive is to be configured. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
별칭 |
PSComputerName |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ControllerLocation<Int32]>
Specifies the number of the location on the controller to which the virtual hard drive to be configured is attached. If not specified, all hard drives are configured.
별칭 |
none |
필수 여부 |
false |
위치 |
4 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ControllerNumber<Int32]>
Specifies the number of the controller to which the virtual hard drive to be configured is attached. If not specified, all hard drives are configured.
별칭 |
none |
필수 여부 |
false |
위치 |
3 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ControllerType<ControllerType>
Specifies the type of the controller to which the virtual hard drive to be configured is attached. Allowed values are Floppy, IDE, and SCSI.
별칭 |
none |
필수 여부 |
false |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Credential<System.Management.Automation.PSCredential[]>
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Passthru
Specifies that a Microsoft.HyperV.PowerShell.HardDiskDrive object is to be passed through to the pipeline representing the virtual hard drive to be configured.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Path<String>
Specifies the path to media the virtual hard disk is to use.
별칭 |
none |
필수 여부 |
false |
위치 |
5 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-QoSPolicy<Microsoft.Management.Infrastructure.CimInstance>
Specifies the storage Quality of Service (QoS) policy to associate with the hard disk drive.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-QoSPolicyID<System.String>
Specifies the ID for a storage QoS policy to associate with the hard disk drive.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ResourcePoolName<String>
Specifies the name of the virtual hard disk resource pool to which this drive belongs.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SupportPersistentReservations<Boolean]>
Indicates whether the hard disk supports SCSI persistent reservation semantics. Specify this parameter when the hard disk is a shared disk that is used by multiple virtual machines.
별칭 |
ShareVirtualDisk |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VMHardDiskDrive<HardDiskDrive[]>
Specifies one or more hard disks to be configured.
별칭 |
none |
필수 여부 |
true |
위치 |
1 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-AllowUnverifiedPaths
Specifies that no error is to be thrown if the specified path is not verified as accessible by the cluster. This parameter is applicable to clustered virtual machines.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DiskNumber<UInt32>
Specifies the disk number of the offline physical hard drive that should be connected as a passthrough disk.
별칭 |
Number |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-MaximumIOPS<UInt64]>
Specifies the maximum normalized I/O operations per second (IOPS) for the hard disk. Hyper-V calculates normalized IOPS as the total size of I/O per second divided by 8 KB.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MinimumIOPS<UInt64]>
Specifies the minimum normalized I/O operations per second (IOPS) for the hard disk. Hyper-V calculates normalized IOPS as the total size of I/O per second divided by 8 KB.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ToControllerLocation<Int32]>
Specifies the controller location to which this drive should be moved. Allowed values are 0 and 1 for IDE controllers, and from 0 to 63 for SCSI controllers.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ToControllerNumber<Int32]>
Specifies the controller location to which this drive should be moved. Allowed values are 0 and 1 for IDE controllers, and from 0 to 3 for SCSI controllers.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ToControllerType<ControllerType]>
Specifies the type of controller to which this drive should be moved. Allowed values are IDE and SCSI.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VMName<String>
Specifies the name of the virtual machine on which the virtual hard drive is to be configured.
별칭 |
none |
필수 여부 |
true |
위치 |
1 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1
Configures the hard drive of virtual machine TestVM to use Test.vhd as its media.
PS C:\> Set-VMHardDiskDrive -VMName TestVM -Path .\Test.vhd
Example 2
Moves the virtual hard drive on virtual machine TestVM from IDE 1,0 to IDE 1,1.
PS C:\> Get-VMHardDiskDrive -VMName TestVM –ControllerType IDE -ControllerNumber 1 -ControllerLocation 0 | Set-VMHardDiskDrive -ToControllerLocation 1