Add-TargetPortToMaskingSet

Add-TargetPortToMaskingSet

Adds one or more target ports to a specified masking set, allowing a connection between the target ports, and any virtual disks and initiator IDs that the masking set contains.

구문

Parameter Set: ByFriendlyName
Add-TargetPortToMaskingSet [-MaskingSetFriendlyName] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-TargetPortAddresses <String[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByUniqueId
Add-TargetPortToMaskingSet -MaskingSetUniqueId <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-TargetPortAddresses <String[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Add-TargetPortToMaskingSet -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-TargetPortAddresses <String[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Add-TargetPortToMaskingSet cmdlet adds one or more target ports to a specified masking set, allowing a connection between the target ports, and any virtual disks and initiator IDs that the masking set contains. All target ports must use the same connection type (for example iSCSI or Fibre Channel).

Note: This cmdlet works only on storage subsystems that support multi-port per view selection (MaskingPortsPerView = 3). To view the MaskingPortsPerView property, type the following cmdlets: Get-StorageSubSystem | Format-Table -Property FriendlyName, MaskingPortsPerView

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-InputObject<CimInstance[]>

Accepts a MaskingSet object from the pipeline as input.

별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-MaskingSetFriendlyName<String[]>

Specifies the friendly name of the masking set to which you want to assign a target port.

별칭

없음

필수 여부

true

위치

1

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-MaskingSetUniqueId<String[]>

Specifies the UniqueID of the masking set to which you want to assign a target port.

별칭

Id

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-PassThru

Specifies that the cmdlet should output an object representing the masking set to which it added target ports. By default, this cmdlet does not generate any output.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-TargetPortAddresses<String[]>

Specifies one or more target port addresses, which you can view by looking at the PortAddress property returned by the Get-TargetPort cmdlet. The target port addresses will be added to the masking set.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

참고

  • Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

Example 1: Add a target port

This example demonstrates enumerating the Fibre Channel target ports on a given storage subsystem, and adding one of the target ports to an existing masking set.

PS C:\> $TargetPortObject = Get-TargetPort
PS C:\> $subSystem = Get-StorageSubSystem SANArray1
PS C:\> $maskingSet = Get-MaskingSet "Cluster1MaskingSet"
PS C:\> $subSystem | Get-TargetPort | Where-Object ConnectionType -eq "Fibre Channel" | Format-Table -AutoSize FriendlyName, PortAddress
PS C:\> $maskingSet | Add-TargetPortToMaskingSet -TargetPortAddresses "500A098187995A75"

관련 항목

Get-MaskingSet

Get-TargetPort

New-MaskingSet