Get-InitiatorId

Get-InitiatorId

Gets the InitiatorID objects for the specified iSCSI initiators.

구문

Parameter Set: ByAddress
Get-InitiatorId [[-InitiatorAddress] <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-HostType <HostType[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByMaskingSet
Get-InitiatorId [-AsJob] [-CimSession <CimSession[]> ] [-MaskingSet <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByStorageSubSystem
Get-InitiatorId [-AsJob] [-CimSession <CimSession[]> ] [-StorageSubSystem <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByUniqueId
Get-InitiatorId [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [-UniqueId <String[]> ] [ <CommonParameters>]

Parameter Set: ByVirtualDisk
Get-InitiatorId [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [-VirtualDisk <CimInstance> ] [ <CommonParameters>]

자세한 설명

The Get-InitiatorId cmdlet gets the InitiatorID objects for the specified iSCSI initiators.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-HostType<HostType[]>

Specifies the host operating system or other host environmental factors that may influence the behavior that the storage system should have when showing a virtual disk to an initiator. If the HostType property is blank for the object you want to get, omit this parameter.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-InitiatorAddress<String[]>

Specifies the address of the InitiatorID object you want to get. These are the port addresses of the hosts to which the virtual disks will be made available.

별칭

없음

필수 여부

false

위치

1

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-MaskingSet<CimInstance>

Gets the InitiatorID objects associated with the specified MaskingSet object. Enter a MaskingSet CIM object, which is exposed by the Get-MaskingSet cmdlet.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-StorageSubSystem<CimInstance>

Gets the InitiatorID objects associated with the specified StorageSubsystem object. Enter a StorageSubsystem CIM object, which is exposed by the Get-StorageSubSystem cmdlet.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-UniqueId<String[]>

Specifies the UniqueID(s) of the InitiatorID(s) you want to get. Separate multiple UniqueIDs with commas, and enclose brackets in quotation marks.

별칭

Id

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-VirtualDisk<CimInstance>

Gets the InitiatorID objects associated with the specified VirtualDisk object. Enter a VirtualDisk CIM object, which is exposed by the Get-VirtualDisk cmdlet.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

참고

  • Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

Example 1: Get all InitiatorIDs

This example gets and displays all iSCSI initiator IDs on the computer.

PS C:\> Get-InitiatorID

Example 2: Get the storage providers for each InitiatorID

This example gets and displays the storage providers for each InitiatorID by piping the output from the Get-InitiatorId cmdlet to the Get-StorageSubSystem cmdlet, and then piping that cmdlet’s output to the Get-StorageProvider cmdlet.

PS C:\> Get-InitiatorId | Get-StorageSubSystem | Get-StorageProvider

Example 3:Get the InitatorID objects for a masking set

This example uses the Get-MaskingSet cmdlet to get the masking set with a friendly name that ends with EQLV1, and then gets all associated InitiatorID objects.

PS C:\> Get-InitiatorId -MaskingSet (Get-MaskingSet -FriendlyName *EQLV1)

관련 항목

Connect-iSCSITarget

Get-InitiatorPort

Remove-InitiatorId