Get-MaskingSet
Get-MaskingSet
Gets masking sets. Masking sets are used to grant access to a virtual disk or iSCSI VHD for one or more servers.
구문
Parameter Set: ByFriendlyName
Get-MaskingSet [[-FriendlyName] <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-HostType <HostType[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInitiatorId
Get-MaskingSet [-AsJob] [-CimSession <CimSession[]> ] [-InitiatorId <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByStorageSubSystem
Get-MaskingSet [-AsJob] [-CimSession <CimSession[]> ] [-StorageSubSystem <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByTargetPort
Get-MaskingSet [-AsJob] [-CimSession <CimSession[]> ] [-TargetPort <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByUniqueId
Get-MaskingSet [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [-UniqueId <String[]> ] [ <CommonParameters>]
Parameter Set: ByVirtualDisk
Get-MaskingSet [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [-VirtualDisk <CimInstance> ] [ <CommonParameters>]
자세한 설명
The Get-MaskingSet cmdlet returns a list of created masking sets. Masking sets are used to grant access to a virtual disk or iSCSI VHD for one or more servers.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-FriendlyName<String[]>
Gets the masking set with the specified friendly name or friendly name pattern.
별칭 |
없음 |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-HostType<HostType[]>
Specifies the host operating system or other host environmental factors that may influence the behavior that the storage system should have when showing a virtual disk to an initiator. If the HostType property is blank for the object you want to get, omit this parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InitiatorId<CimInstance>
Gets the masking set associated with the specified InitiatorId object. Enter an InitiatorID CIM object, which is exposed by the Get-InitiatorId cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-StorageSubSystem<CimInstance>
Gets the masking set associated with the specified StorageSubSystem object. Enter a StorageSubSystem CIM object, which is exposed by the Get-StorageSubSystem cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-TargetPort<CimInstance>
Gets the masking set associated with the specified TargetPort object. Enter a TargetPort CIM object, which is exposed by the Get-TargetPort cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UniqueId<String[]>
Specifies the UniqueID of the masking set to get.
별칭 |
Id |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-VirtualDisk<CimInstance>
Gets the masking set associated with the specified VirtualDisk object. Enter a VirtualDisk CIM object, which is exposed by the Get-VirtualDisk cmdlet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_InitiatorId
You can pipe an InitiatorId object to the InitiatorId parameter.
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_StorageSubsystem
You can pipe a StorageSubsystem object to the StorageSubsystem parameter.
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_TargetPort
You can pipe a TargetPort object to the TargetPort parameter.
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_VirtualDisk
You can pipe a VirtualDisk object to the VirtualDisk parameter.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_MaskingSet
This cmdlet outputs an object that represents a masking set.
참고
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
Example 1: Get all masking sets
This example gets and displays all existing MaskingSet objects which have been created using any available Storage Management Providers across all visible storage subsystems.
PS C:\> Get-MaskingSet
Example 2: Get all Microsoft Windows masking sets
This example gets and displays all masking sets hosted by a computer running Microsoft Windows.
PS C:\> Get-MaskingSet -HostType MicrosoftWindows
Example 3: Get the masking set for a specific virtual disk
This example gets the masking set for the CompanyData virtual disk. It does so by using the Get-VirtualDisk cmdlet to get the appropriate VirtualDisk object and provide it to the VirtualDisk parameter of Get-MaskingSet.
PS C:\> Get-MaskingSet -VirtualDisk (Get-VirtualDisk -FriendlyName CompanyData)