Set-ADReplicationSiteLinkBridge

업데이트 날짜: 2015년 7월

적용 대상: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADReplicationSiteLinkBridge

Sets the properties of a replication site link bridge in Active Directory.

구문

Parameter Set: Default
Set-ADReplicationSiteLinkBridge [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Identity
Set-ADReplicationSiteLinkBridge [-Identity] <ADReplicationSiteLinkBridge> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-PassThru] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-SiteLinksIncluded <Hashtable> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADReplicationSiteLinkBridge [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Instance <ADReplicationSiteLinkBridge> ] [-PassThru] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-ADReplicationSiteLinkBridge cmdlet sets the properties for a replication site link bridge in Active Directory. A site link bridge connects two or more site links and enables transitivity between site links. Each site link in a bridge must have a site in common with another site link in the bridge.

매개 변수

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the Lightweight Directory Access Protocol (LDAP) display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-AuthType<ADAuthType>

Specifies the authentication method to use. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

별칭	없음
필수 여부	false
위치	named
기본값	Microsoft.ActiveDirectory.Management.AuthType.Negotiate
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Clear<String[]>

Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Identity<ADReplicationSiteLinkBridge>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- A distinguished name
-- A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

별칭	없음
필수 여부	true
위치	1
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-Instance<ADReplicationSiteLinkBridge>

Specifies an instance of a site link bridge object to use as a template for a new site link bridge object.

You can use an instance of an existing site link bridge object as a template or you can construct a new site link bridge object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing site link bridge object as a template for a new object. To retrieve an instance of an existing site link bridge object, use a cmdlet such as Get-ADReplicationSiteLinkBridge. Then provide this object to the Instance parameter of the New-ADReplicationSiteLinkBridge cmdlet to create a new site link bridge object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSiteLinkBridge and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSiteLinkBridge cmdlet to create the new Active Directory object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Server<String>

Specifies the Active Directory Domain Services (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Directory Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-SiteLinksIncluded<Hashtable>

Specifies the list of site links that are included in this site link bridge. Accepted values for this parameter are the distinguished name (DN), a GUID, or the name of a site link.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부	false
위치	named
기본값	false
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부	false
위치	named
기본값	false
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLinkBridge

  A site link bridge object is received by the Identity parameter.

  A site link bridge object that was retrieved by using the Get-ADReplicationSiteLinkBridge cmdlet and then modified is received by the Instance parameter.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLinkBridge

예제

Example 1: Configure a site link in a site link bridge

This command updates the site link bridge NorthAmerica-Asia to use Europe2 instead of Europe.

PS C:\> Set-ADReplicationSiteLinkBridge -Identity "NorthAmerica-Asia" -SiteLinksIncluded @{Add='NorthAmerica-Europe2','Europe2-Asia';Remove='NorthAmerica-Europe','Europe-Asia'}

Example 2: Configure a filtered list of site link bridges

This command gets all the site link bridges in the directory that includes site links NorthAmerica-Europe and Europe-Asia, and then updates the site link bridge objects to use Europe2 instead of Europe.

PS C:\> Get-ADReplicationSiteLinkBridge -Filter {SiteLinksIncluded -eq "NorthAmerica-Europe" -and SiteLinksIncluded -eq "Europe-Asia"} -Properties SiteLinksIncluded | % {Set-ADReplicationSiteLinkBridge $_ -SiteLinksIncluded @{Add='NorthAmerica-Europe2','Europe2-Asia';Remove='NorthAmerica-Europe','Europe-Asia'}}

관련 항목

Get-ADReplicationSiteLinkBridge

New-ADReplicationSiteLinkBridge

Remove-ADReplicationSiteLinkBridge