Set-ADResourceProperty
업데이트 날짜: 2015년 7월
적용 대상: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2
Set-ADResourceProperty
Modifies a resource property in Active Directory.
구문
Parameter Set: Default
Set-ADResourceProperty [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: Identity
Set-ADResourceProperty [-Identity] <ADResourceProperty> [-Add <Hashtable> ] [-AppliesToResourceTypes <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-DisplayName <String> ] [-Enabled <Boolean> ] [-PassThru] [-ProtectedFromAccidentalDeletion <Boolean> ] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-SharesValuesWith <ADClaimType> ] [-SuggestedValues <ADSuggestedValueEntry[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: Instance
Set-ADResourceProperty -Instance <ADResourceProperty> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-ADResourceProperty cmdlet can be used to modify a resource property in Active Directory.
매개 변수
-Add<Hashtable>
Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the Lightweight Directory Access Protocol (LDAP) display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon.. The format for this parameter is:
-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}
When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:
-- Remove
-- Add
-- Replace
-- Clear
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AppliesToResourceTypes<Hashtable>
Specifies the list of resource types that this property applies to. For Set-ADResourceProperty operations, you can add or include new resource types within an existing property by specifying them using this parameter. You do not have to specify all previously listed resource types already within this property.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AuthType<ADAuthType>
Specifies the authentication method to use. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Negotiate or 0
-- Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
Microsoft.ActiveDirectory.Management.AuthType.Negotiate |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Clear<String[]>
Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:
-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName
When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:
-- Remove
-- Add
-- Replace
-- Clear
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Credential<PSCredential>
Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.
To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.
If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Description<String>
Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DisplayName<String>
Displays the name of the resource property. The display name of the resource property must be unique.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Enabled<Boolean>
Specifies whether the resource property is enabled.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Identity<ADResourceProperty>
Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- A distinguished name
-- A GUID (objectGUID)
This parameter can also get this object through the pipeline or you can set this parameter to an object instance.
별칭 |
없음 |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-Instance<ADResourceProperty>
Specifies an instance of a resource property object to use as a template for a new resource property object.
You can use an instance of an existing resource property object as a template or you can construct a new resource property object by using the Windows PowerShell command line or by using a script.
Method 1: Use an existing resource property object as a template for a new object. To retrieve an instance of an existing resource property object, use a cmdlet such as Get-ADResourceProperty. Then provide this object to the Instance parameter of the New-ADResourceProperty cmdlet to create a new resource property object. You can override property values of the new object by setting the appropriate parameters.
Method 2: Create a new ADResourceProperty and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADResourceProperty cmdlet to create the new resource property object.
Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set raises an error.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ProtectedFromAccidentalDeletion<Boolean>
Specifies whether to prevent the object from being deleted. When this property is set to $True, you cannot delete the corresponding object without changing the value of the property. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- $False or 0
-- $True or 1
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Remove<Hashtable>
Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:
-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}
When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:
-- Remove
-- Add
-- Replace
-- Clear
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Replace<Hashtable>
Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:
-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}
When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:
-- Remove
-- Add
-- Replace
-- Clear
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Server<String>
Specifies the AD DS instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: AD LDS, AD DS, or Active Directory snapshot instance.
Specify the AD DS instance in one of the following ways:
Domain name values:
-- Fully qualified domain name
-- NetBIOS name
Directory server values:
-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port
The default value for this parameter is determined by one of the following methods in the order that they are listed:
-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SharesValuesWith<ADClaimType>
Specifies a reference resource property. Reference resource properties do not provide their own suggested values, but rather use the suggested values from the claim type object specified in this parameter. This enables the resource property to be always valid for comparisons with the referred claim type in a central access rule.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SuggestedValues<ADSuggestedValueEntry[]>
Specifies one or more suggested values for the resource property. An application may choose to present this list of suggested values for the user to choose from. When RestrictValues is set to $True, the application should restrict the user to pick values from this list only.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None or Microsoft.ActiveDirectory.Management.ADResourceProperty
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- None or Microsoft.ActiveDirectory.Management.ADResourceProperty
참고
This cmdlet does not work with an Active Directory snapshot.
This cmdlet does not work with a read-only domain controller.
예제
Example 1: Set the suggested values for a resource property
This command sets the suggested values of the resource property with display name Country to US and JP. Applications using this resource property would allow their users to specify one of the suggested values as this resource property's value.
PS C:\> $US = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("US", "United States of America", "United States of America")
PS C:\> $JP = New-Object Microsoft.ActiveDirectory.Management.ADSuggestedValueEntry("JP", "Japan", "Japan")
PS C:\> Set-ADResourceProperty -Identity Country -SuggestedValues $US,$JP
Example 2: Set a reference property to use shared values
This command sets the resource property with display name Country to reference an existing claim type named Country for its suggested values. This enables the resource property to be always valid for comparisons with the referenced claim type in a central access rule.
PS C:\> Set-ADResourceProperty -Identity Country -SharesValuesWith Country