Set-ADReplicationSubnet

Windows Server 2012 R2 and Windows 8.1

업데이트 날짜: 2015년 7월

적용 대상: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADReplicationSubnet

Sets the properties of an Active Directory replication subnet object.

구문

Parameter Set: Default
Set-ADReplicationSubnet [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Identity
Set-ADReplicationSubnet [-Identity] <ADReplicationSubnet> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-Location <String> ] [-PassThru] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-Site <ADReplicationSite> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADReplicationSubnet [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Instance <ADReplicationSubnet> ] [-PassThru] [-Confirm] [-WhatIf] [ <CommonParameters>]




자세한 설명

The Set-ADReplicationSubnet cmdlet sets the properties of an Active Directory replication subnet object. Subnet objects (class subnet) define network subnets in Active Directory. A network subnet is a segment of a TCP/IP network to which a set of logical IP addresses is assigned. Subnets group computers in a way that identifies their physical proximity on the network. Subnet objects in Active Directory are used to map computers to sites.

매개 변수

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-AuthType<ADAuthType>

Specifies the authentication method to use. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.


별칭

없음

필수 여부

false

위치

named

기본값

Microsoft.ActiveDirectory.Management.AuthType.Negotiate

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Clear<String[]>

Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Credential<PSCredential>

Specifies a user account that has permission to perform this action. The default is the current user.

Type a user name, such as User01 or Domain01\User01, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

This parameter is not supported by any providers installed with Windows PowerShell.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Identity<ADReplicationSubnet>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- A distinguished name
-- A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.


별칭

없음

필수 여부

true

위치

1

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-Instance<ADReplicationSubnet>

Specifies an instance of a subnet object to use as a template for a new subnet object.

You can use an instance of an existing subnet object as a template or you can construct a new subnet object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing subnet object as a template for a new object. To retrieve an instance of an existing subnet object, use a cmdlet such as Get-ADReplicationSubnet. Then provide this object to the Instance parameter of the New-ADReplicationSubnet cmdlet to create a new subnet object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSubnet and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSubnet cmdlet to create the new subnet object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Location<String>

Specifies a string that can be used to describe the physical location of this subnet. This value may be displayed or made visible when the subnet object appears in other Active Directory administrative tools.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Server<String>

Specifies the AD DS instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: AD LDS, AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Site<ADReplicationSite>

Specifies the site associated with this subnet.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.


필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.


필수 여부

false

위치

named

기본값

false

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(http://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

  • None or Microsoft.ActiveDirectory.Management.ADReplicationSubnet

    A subnet object is received by the Identity parameter.

    A subnet object that was retrieved by using the Get-ADReplicationSubnet cmdlet and then modified is received by the Instance parameter.


출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • None or Microsoft.ActiveDirectory.Management.ADReplicationSubnet

예제

Example 1: Set a specified replication subnet

This command sets the properties of the replication subnet identified as 10.0.0.12/22.


PS C:\> Set-ADReplicationSubnet -Identity "10.0.0.12/22" -Site Asia -Location "Tokyo,Japan"

Example 2: Set a filtered list of replication subnets

This command gets all of the replication subnets that are in Japan, and sets Asia as their associated site.


PS C:\> Get-ADReplicationSubnet -Filter {Location -like "*Japan"} -Properties Site | % {Set-ADReplicationSubnet $_ -Site Asia}

관련 항목

커뮤니티 추가 항목

추가
표시: