Set-ADCentralAccessRule

업데이트 날짜: 2015년 7월

적용 대상: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADCentralAccessRule

Modifies a central access rule in Active Directory.

구문

Parameter Set: Identity
Set-ADCentralAccessRule [-Identity] <ADCentralAccessRule> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-CurrentAcl <String> ] [-Description <String> ] [-PassThru] [-ProposedAcl <String> ] [-ProtectedFromAccidentalDeletion <Boolean> ] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-ResourceCondition <String> ] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADCentralAccessRule -Instance <ADCentralAccessRule> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-ADCentralAccessRule cmdlet can be used to modify a central access rule in a central access policy that is stored in Active Directory.

매개 변수

-Add<Hashtable>

Specifies values to add to an object property. You can use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the Lightweight Directory Access Protocol (LDAP) display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon.. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace, and Clear parameters together, the operations are performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

-AuthType<ADAuthType>

Specifies the authentication method to use. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

-Clear<String[]>

Specifies an array of object properties that are cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations are performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.

-CurrentAcl<String>

Specifies the currently effective access control list (ACL) of the rule. The current ACL grants access to target resources once the central access policy containing this rule is published.

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP display name (ldapDisplayName) for this property is description.

-Identity<ADCentralAccessRule>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- A distinguished name
-- A GUID (objectGUID)
-- A security identifier (objectSid)
-- A SAM account name (sAMAccountName)

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

-Instance<ADCentralAccessRule>

Specifies a modified copy of an central access rule object to use to update the actual central access rule object. When this parameter is used, any modifications made to the modified copy of the object are also made to the corresponding central access rule object. The cmdlet only updates the object properties that have changed.

The Instance parameter can only update central access rule objects that have been retrieved by using the Get-ADCentralAccessRule cmdlet. When you specify the Instance parameter, you cannot specify other parameters that set properties on the object.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-ProposedAcl<String>

Specifies the proposed ACL of the central access rule. The proposed ACL allows an administrator to audit the results of access requests to target resources specified in the resource condition without affecting the current system. To view the logs, go to Event Viewer or other audit tools to view the logs.

-ProtectedFromAccidentalDeletion<Boolean>

Specifies whether to prevent the object from being deleted. When this property is set to true, you cannot delete the corresponding object without changing the value of the property. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- $False or 0
-- $True or 1

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters are applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the operations are performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

-ResourceCondition<String>

Specifies the resource condition of the central access rule. The resource condition specifies a list of criteria to scope the resources.

-Server<String>

Specifies the Active Directory 도메인 서비스 instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory 도메인 서비스 or Active Directory snapshot instance.

Specify the Active Directory 도메인 서비스 instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the Active Directory 도메인 서비스 Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• None or Microsoft.ActiveDirectory.Management.ADCentralAccessPolicyEntry

  An ADCentralAccessPolicyEntry object is received by the Identity parameter.

  An ADCentralAccessPolicyEntry object that was retrieved by using the Get-ADCentralAccessPolicyEntry cmdlet and then modified is received by the Instance parameter.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• None or Microsoft.ActiveDirectory.Management.ADCentralAccessPolicyEntry

  Returns the modified ADCentralAccessPolicyEntry object when the PassThru parameter is specified. By default, this cmdlet does not generate any output.

참고

• This cmdlet does not work with an Active Directory snapshot.

• This cmdlet does not work with a read-only domain controller.

예제

Example 1: Set a condition on a central access rule

This command sets the central access rule named Finance Documents Rule with a new resource condition. The resource condition scopes the resources to ones containing the value Finance in their Department resource property.

PS C:\> $departmentResourceProperty = Get-ADResourceProperty -Identity Department
PS C:\> $resourceCondition = "(@RESOURCE." + $departmentResourceProperty.Name + " Contains {`"Finance`"})" 
PS C:\> Set-ADCentralAccessRule -Identity "Finance Documents Rule" -ResourceCondition $resourceCondition

Example 2: Set a resource condition and new permissions on a central access rule

This example sets the central access rule named Finance Documents Rule with a new resource condition and new permissions.

The new rule specifies that documents should only be read by members of the Finance department. Members of the Finance department should only be able to access documents in their own country. Only Finance Administrators should have write access. The rule allows an exception for members of the FinanceException group. This group will have read access.

Targeting:

-- Resource.Department Contains Finance
-- Allow Full control User.MemberOf(FinanceAdmin)

Access rules:

-- Allow Read User.Country=Resource.Country AND User.department = Resource.Department
-- Allow Full control User.MemberOf(FinanceAdmin)
-- Allow Read User.Country=Resource.Country AND User.department = Resource.Department
-- Allow Read User.MemberOf(FinanceException)

PS C:\> $CountryClaimType = Get-ADClaimType -Identity Country 
PS C:\> $DepartmentClaimType = Get-ADClaimType -Identity Department 
PS C:\> $CountryResourceProperty = Get-ADResourceProperty -Identity Country 
PS C:\> $DepartmentResourceProperty = Get-ADResourceProperty -Identity Department 
PS C:\> $FinanceException = Get-ADGroup -Identity FinanceException 
PS C:\> $FinanceAdmin = Get-ADGroup -Identity FinanceAdmin 
PS C:\> $ResourceCondition = "(@RESOURCE." + $departmentResourceProperty.Name + " Contains {`"Finance`"})" 
PS C:\> $CurrentAcl = "O:SYG:SYD:AR(A;;FA;;;OW)(A;;FA;;;BA)(A;;0x1200a9;;;" + $financeException.SID.Value + ")(A;;0x1301bf;;;" + $FinanceAdmin.SID.Value + ")(A;;FA;;;SY)(XA;;0x1200a9;;;AU;((@USER." + $CountryClaimType.Name + " Any_of @RESOURCE." + $CountryResourceProperty.Name + ") && (@USER." + $DepartmentClaimType.Name + " Any_of @RESOURCE." + $DepartmentResourceProperty.Name + ")))" 
PS C:\> Set-ADCentralAccessRule -Identity "Finance Documents Rule" -ResourceCondition $ResourceCondition -CurrentAcl $currentAcl

Example 3: Set a description on a central access rule

This command gets the central access rule named Finance Documents Rule, and set the description to For finance documents.

PS C:\> Get-ADCentralAccessRule -Identity "Finance Documents Rule" | Set-ADCentralAccessRule -Description "For finance documents."

관련 항목

Get-ADCentralAccessRule

New-ADCentralAccessRule

Remove-ADCentralAccessRule

AD DS Administration Cmdlets in Windows PowerShell