Get-ADReplicationConnection

Windows Server 2012 R2 and Windows 8.1

업데이트 날짜: 2015년 7월

적용 대상: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Get-ADReplicationConnection

Returns a specific Active Directory replication connection or a set of AD replication connection objects based on a specified filter.

구문

Parameter Set: Filter
Get-ADReplicationConnection [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Filter <String> ] [-Properties <String[]> ] [ <CommonParameters>]

Parameter Set: Default
Get-ADReplicationConnection [-Server] <String> [ <CommonParameters>]

Parameter Set: Identity
Get-ADReplicationConnection [-Identity] <ADReplicationConnection> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Properties <String[]> ] [ <CommonParameters>]




자세한 설명

The Get-ADReplicationConnection cmdlet returns a specific Active Directory replication connection or a set of Active Directory replication connection objects based on a specified filter. Connections are used to enable domain controllers to replicate with each other. A connection defines a one-way, inbound route from one domain controller (the source), to another domain controller (the destination). The Kerberos consistency checker (KCC) reuses existing connections where it can, deletes unused connections, and creates new connections if none exist that meet the current need.

매개 변수

-AuthType<ADAuthType>

Specifies the authentication method to use. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.


별칭

없음

필수 여부

false

위치

named

기본값

Microsoft.ActiveDirectory.Management.AuthType.Negotiate

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object

If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Filter<String>

Specifies a query string that retrieves Active Directory objects. This string uses the PowerShell Expression Language syntax. The PowerShell Expression Language syntax provides rich type-conversion support for value types received by the Filter parameter. The syntax uses an in-order representation, which means that the operator is placed between the operand and the value. For more information about the Filter parameter, type Get-Help about_ActiveDirectory_Filter.

Syntax:

The following syntax uses Backus-Naur form to show how to use the PowerShell Expression Language for this parameter.

<filter> ::= "{" <FilterComponentList> "}"

<FilterComponentList> ::= <FilterComponent> | <FilterComponent> <JoinOperator> <FilterComponent> | <NotOperator> <FilterComponent>

<FilterComponent> ::= <attr> <FilterOperator> <value> | "(" <FilterComponent> ")"

<FilterOperator> ::= "-eq" | "-le" | "-ge" | "-ne" | "-lt" | "-gt"| "-approx" | "-bor" | "-band" | "-recursivematch" | "-like" | "-notlike"

<JoinOperator> ::= "-and" | "-or"

<NotOperator> ::= "-not"

<attr> ::= <PropertyName> | <LDAPDisplayName of the attribute>

<value>::= <compare this value with an <attr> by using the specified <FilterOperator>>

For a list of supported types for <value>, see about_ActiveDirectory_ObjectModel.

Note: PowerShell wildcards other than *, such as ?, are not supported by the Filter syntax.

Note: To query using LDAP query strings, use the LDAPFilter parameter.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Identity<ADReplicationConnection>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- A distinguished name
-- A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.


별칭

없음

필수 여부

true

위치

1

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-Properties<String[]>

Specifies the properties of the output object to retrieve from the server. Use this parameter to retrieve properties that are not included in the default set.

Specify properties for this parameter as a comma-separated list of names. To display all of the attributes that are set on the object, specify * (asterisk).

To specify an individual extended property, use the name of the property. For properties that are not default or extended properties, you must specify the LDAP display name of the attribute.

To retrieve properties and display them for an object, you can use the Get-* cmdlet associated with the object and pass the output to the Get-Member cmdlet.


별칭

Property

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Server<String>

Specifies the Active Directory 도메인 서비스 (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Directory Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell


별칭

없음

필수 여부

true

위치

2

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(http://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

  • None or Microsoft.ActiveDirectory.Management.ADReplicationConnection

    A connection object is received by the Identity parameter.


출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • Microsoft.ActiveDirectory.Management.ADReplicationConnection

예제

Example 1: Get all replication connections

This command gets all of the replication connections.


PS C:\> Get-ADReplicationConnection -Filter *

Example 2: Get all replication connections from a specified domain controller

This command gets all replication connections that replicate from corp-DC01.


PS C:\> Get-ADReplicationConnection -Filter {ReplicateFromDirectoryServer -eq "corp-DC01"}

Example 3: Get a specified replication connection

This command gets the replication connection with the GUID 5f98e288-19e0-47a0-9677-57f05ed54f6b.


PS C:\> Get-ADReplicationConnection -Identity "5f98e288-19e0-47a0-9677-57f05ed54f6b"

Example 4: Get the properties of a replication connection

This command gets all the properties of the replication connection with the GUID 5f98e288-19e0-47a0-9677-57f05ed54f6b.


PS C:\> Get-ADReplicationConnection -Identity "5f98e288-19e0-47a0-9677-57f05ed54f6b" -Properties *

관련 항목

커뮤니티 추가 항목

추가
표시: