Enable-ADOptionalFeature

업데이트 날짜: 2015년 7월

적용 대상: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Enable-ADOptionalFeature

Enables an Active Directory optional feature.

구문

Parameter Set: Default
Enable-ADOptionalFeature [-Identity] <ADOptionalFeature> [-Scope] <ADOptionalFeatureScope> {Unknown | ForestOrConfigurationSet | Domain} [-Target] <ADEntity> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Enable-ADOptionalFeature cmdlet enables an Active Directory optional feature that is associated with a particular domain mode or forest mode. Active Directory optional features that depend on a specified domain mode or forest mode must be explicitly enabled after the domain mode or forest mode is set.

The Identity parameter specifies the Active Directory optional feature that you want to enable. You can identify an optional feature by its distinguished name, feature GUID, or object GUID. You can also set the parameter to an optional feature object variable, such as $<localOptionalFeatureObject> or you can pass an optional feature object through the pipeline to the Identity parameter. For example, you can use the Get-ADOptionalFeature cmdlet to retrieve an optional feature object and then pass the object through the pipeline to the Enable-ADOptionalFeature cmdlet.

The Scope parameter specifies the scope at which the optional feature is enabled.

The Target parameter specifies the domain or forest on which the optional feature is enabled. You can identify the domain or forest by its fully-qualified domain name (FQDN), NetBIOS name, or distinguished name of the domain naming context.

매개 변수

-AuthType<ADAuthType>

Specifies the authentication method to use. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.

-Identity<ADOptionalFeature>

Specifies an Active Directory optional feature object by providing one of the following values. The identifier in parentheses is the Lightweight Directory Access Protocol (LDAP) display name for the attribute. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- A FQDN
-- A feature GUID (featureGUID)
-- An object GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an optional feature object instance.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-Scope<ADOptionalFeatureScope>

Specifies the scope at which the feature is enabled or disabled. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Domain or 0
-- Forest or 1

-Server<String>

Specifies the Active Directory 도메인 서비스 (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- FQDN
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

-Target<ADEntity>

Specifies the domain or forest in which to modify the optional feature. You can identify the target domain or forest by providing one of the following values:

-- FQDN of the forest or domain
-- NetBIOS name of the forest or domain

You can also, where Scope is set to domain (not forest), use the following:

-- Distinguished name of the domain naming context

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• Microsoft.ActiveDirectory.Management.ADOptionalFeature

  An optional feature object is received by the Identity parameter.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• None

참고

• This cmdlet does not work with an Active Directory snapshot.

• This cmdlet does not work with a read-only domain controller.

• Recycle Bin Feature: Once the Active Directory Recycle Bin is enabled, all objects deleted before the Active Directory Recycle Bin was enabled (tombstone objects) become recycled objects. They are no longer visible in the Deleted Objects container and they cannot be recovered using Active Directory Recycle Bin. The only way to restore these objects is through an authoritative restore from an AD DS backup taken before the Active Directory Recycle Bin was enabled.

예제

Example 1: Enable the Recycle Bin feature for a forest

This command enables the optional feature Recycle Bin feature for the forest fabrikam.com. This operation must be performed on the domain controller that holds the naming flexible single master operations (FSMO) role.

PS C:\> Enable-ADOptionalFeature -Identity 'Recycle Bin Feature' -Scope ForestOrConfigurationSet -Target 'fabrikam.com' -Server dc1

Example 2: Enable the Recycle bin for an AD LDS instance

This command enables the optional feature Recycle Bin feature for the AD LDS instance lds.fabrikam.com. This operation must be performed on the AD LDS instance that holds the naming FSMO role.

PS C:\> Enable-ADOptionalFeature -Identity 'Feature 1' -Scope ForestOrConfigurationSet -Target 'CN=Configuration,CN={0241853A-6BBF-48AA-8AE0-9C35D0C91B7B}' -Server lds.fabrikam.com:50000

Example 3: Set the ForestMode on an AD LDS instance

This command sets the ForestMode (Forest Functional Level) to Windows2008R2Forest on an AD LDS instance. The ForestMode must be Windows2008R2Forest or later in order to enable the Recycle Bin feature for AD LDS.

PS C:\> Set-ADObject -Identity "CN=Partitions,CN=Configuration,CN={4F971828-5BE4-4E94-B532-58F2BFB6A3A5}" -Replace @{"msDS-Behavior-Version"=4}

관련 항목

Disable-ADOptionalFeature

Get-ADOptionalFeature