Set-ADReplicationSite

아티클
11/16/2015

Set-ADReplicationSite

Sets the replication properties for an Active Directory site.

Syntax

Parameter Set: Identity
Set-ADReplicationSite [-Identity] <ADReplicationSite> [-Add <Hashtable> ] [-AuthType <ADAuthType> ] [-AutomaticInterSiteTopologyGenerationEnabled <Boolean> ] [-AutomaticTopologyGenerationEnabled <Boolean> ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-InterSiteTopologyGenerator <ADDirectoryServer> ] [-ManagedBy <ADPrincipal> ] [-PassThru] [-ProtectedFromAccidentalDeletion <Boolean> ] [-RedundantServerTopologyEnabled <Boolean> ] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-ReplicationSchedule <ActiveDirectorySchedule> ] [-ScheduleHashingEnabled <Boolean> ] [-Server <String> ] [-TopologyCleanupEnabled <Boolean> ] [-TopologyDetectStaleEnabled <Boolean> ] [-TopologyMinimumHopsEnabled <Boolean> ] [-UniversalGroupCachingEnabled <Boolean> ] [-UniversalGroupCachingRefreshSite <ADReplicationSite> ] [-WindowsServer2000BridgeheadSelectionMethodEnabled <Boolean> ] [-WindowsServer2000KCCISTGSelectionBehaviorEnabled <Boolean> ] [-WindowsServer2003KCCBehaviorEnabled <Boolean> ] [-WindowsServer2003KCCIgnoreScheduleEnabled <Boolean> ] [-WindowsServer2003KCCSiteLinkBridgingEnabled <Boolean> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADReplicationSite -Instance <ADReplicationSite> [-AuthType <ADAuthType> ] [-Credential <PSCredential> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Detailed Description

The Set-ADReplicationSite cmdlet is used to set the properties for an Active Directory site that is being used for replication. Sites are used in Active Directory to either enable clients to discover network resources (published shares, domain controllers) close to the physical location of a client computer or to reduce network traffic over wide area network (WAN) links. Sites can also be used to optimize replication between domain controllers.

Parameters

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon.. The format for this parameter is

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

For example, if you want to remove the value "555-222-2222" and add the values "555-222-1111" and "555-222-3333" to Phone-Office-Other attribute (LDAP display name 'otherTelephone'), and add the value "555-222-9999" to Phone-Mobile-Other (LDAP display name 'otherMobile'), set the Add and Remove parameters as follows.

-Add @{otherTelephone='555-222-1111', '555-222-3333'; otherMobile='555-222-9999' } -Remove @{otherTelephone='555-222-2222'}

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

..Remove

..Add

..Replace

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-AuthType<ADAuthType>

Specifies the authentication method to use. Possible values for this parameter include:

Negotiate or 0

Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

The following example shows how to set this parameter to Basic.

-AuthType Basic

Aliases	none
Required?	false
Position?	named
Default Value	Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-AutomaticInterSiteTopologyGenerationEnabled<Boolean>

Prevents the KCC that functions as the intersite topology generator (ISTG) from generating connections for intersite replication. Use this option when you want to create manual intersite connections (disable the ISTG) but retain the KCC to generate intrasite connections.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-AutomaticTopologyGenerationEnabled<Boolean>

When enabled, prevents the KCC from generating intrasite connections on all servers in the site. Disable this option if you use manual connections and do not want the KCC to build connections automatically.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Clear<String[]>

Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

For example, if you want to clear the value for the Phone-Office-Other attribute (LDAP display name 'otherTelephone') set the Clear parameter as follows.

-Clear otherTelephone

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

..Remove

..Add

..Replace

..Clear

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Credential<PSCredential>

Specifies a user account that has permission to perform this action. The default is the current user.

Type a user name, such as "User01" or "Domain01\User01", or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

This parameter is not supported by any providers installed with Windows PowerShell.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is "description".

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Identity<ADReplicationSite>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute.

Distinguished Name

Example: CN=NorthAmerica,CN=Sites,CN=Configuration,DC=corp,DC=contoso,DC=com

GUID (objectGUID)

Example: 599c3d2e-f72d-4d20-8a88-030d99495f20

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

This example shows how to set this parameter to an ADObject object instance named "ADObjectInstance".

-Identity $ADObjectInstance

Aliases	none
Required?	true
Position?	1
Default Value	None
Accept Pipeline Input?	true (ByValue)
Accept Wildcard Characters?	false

-Instance<ADReplicationSite>

Specifies an instance of a site object to use as a template for a new site object.

You can use an instance of an existing site object as a template or you can construct a new site object by using the Windows PowerShell command line or by using a script. The following examples show how to use these two methods to create a new site object.

Method 1: Use an existing site object as a template for a new object. To retrieve an instance of an existing site object, use a cmdlet such as Get-ADReplicationSite. Then provide this object to the Instance parameter of the New-ADReplicationSite cmdlet to create a new site object. You can override property values of the new object by setting the appropriate parameters.

$objectInstance = Get-ADReplicationSite -Identity NorthAmerica

New-ADReplicationSite -Name "SouthAmerica" -Instance $ObjectInstance

Method 2: Create a new ADReplicationSite and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSite cmdlet to create the new Active Directory object.

$objectInstance = new-object Microsoft.ActiveDirectory.Management.ADReplicationSite

$objectInstance.Description = North America"

New-ADReplicationSite -Name "NorthAmerica" -Instance $ObjectInstance

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-InterSiteTopologyGenerator<ADDirectoryServer>

The server acting as the inter-site topology generator for this site.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-ManagedBy<ADPrincipal>

Specifies the user or group that manages the object by providing one of the following property values. Note: The identifier in parentheses is the LDAP display name for the property.

Distinguished Name

Example: CN=SaraDavis,OU=Europe,CN=Users,DC=corp,DC=contoso,DC=com

GUID (objectGUID)

Example: 599c3d2e-f72d-4d20-8a88-030d99495f20

Security Identifier (objectSid)

Example: S-1-5-21-3165297888-301567370-576410423-1103

SAM Account Name (sAMAccountName)

Example: saradavis

This parameter sets the Active Directory attribute with an LDAP Display Name of "managedBy".

The following example shows how to specify this parameter.

-ManagedBy ContosoAdmins

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PassThru

Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not generate any output.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-ProtectedFromAccidentalDeletion<Boolean>

Specifies whether to prevent the object from being deleted. When this property is set to true, you cannot delete the corresponding object without changing the value of the property. Possible values for this parameter include:

$false or 0

$true or 1

The following example shows how to set this parameter to true.

-ProtectedFromAccidentalDeletion $true

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-RedundantServerTopologyEnabled<Boolean>

Creates redundant connections between sites before a failure takes place. When enabled, disables KCC failover. Requires that automatic detection of failed connections also be disabled (+IS_TOPL_DETECT_STALE_DISABLED).

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

For example, if you want to add the values blue and green and remove the value pink from a property with a LDAP display name of FavColors, set the Add and Remove parameters as follows.

-Add @{FavColors=Blue,Green} -Remove {FavColors=Pink}

When you use the Add, Remove, Replace and Clear parameters together, the parameters will be applied in the following sequence:

..Remove

..Add

..Replace

..Clear

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

For example, if you want to replace the value "555-222-2222" with the values "555-222-1111" for Phone-Office-Other attribute (LDAP display name 'otherTelephone') set the Replace parameter as follows.

-Replace @{otherTelephone='555-222-2222', '555-222-1111'}

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

..Remove

..Add

..Replace

..Clear

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-ReplicationSchedule<ActiveDirectorySchedule>

Default replication schedule for connections within this site (intra-site replication).

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-ScheduleHashingEnabled<Boolean>

Spreads replication start times randomly across the entire schedule interval rather than just the first quarter of the interval.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Server<String>

Specifies the Active Directory Domain Services instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.

Domain name values:

Fully qualified domain name

Examples: corp.contoso.com

NetBIOS name

Example: CORP

Directory server values:

Fully qualified directory server name

Example: corp-DC12.corp.contoso.com

NetBIOS name

Example: corp-DC12

Fully qualified directory server name and port

Example: corp-DC12.corp.contoso.com:3268

The default value for the Server parameter is determined by one of the following methods in the order that they are listed:

-By using Server value from objects passed through the pipeline.

-By using the server information associated with the Active Directory PowerShell provider drive, when running under that drive.

-By using the domain of the computer running Powershell.

The following example shows how to specify a full qualified domain name as the parameter value.

-Server "corp.contoso.com"

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-TopologyCleanupEnabled<Boolean>

When enabled, this optional parameter prevents the Kerberos consistency checker (KCC) from removing connection objects that it does not need. Disable this option if you want to take responsibility for removing old redundant connections. Alternatively, to control or augment the topology, you can use manual connections, which the KCC does not delete.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-TopologyDetectStaleEnabled<Boolean>

This parameter option prevents the Kerberos consistency checker (KCC) from excluding servers that are unreachable from the topology; that is, the KCC does use an alternate server to reroute replication. Use this option only if network communication is very unstable and brief outages are expected.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-TopologyMinimumHopsEnabled<Boolean>

When enabled, this parameter prevents the Kerberos consistency checker (KCC) from generating optimizing connections in the ring topology of intrasite replication. Optimizing connections reduce the replication latency in the site and disabling them is not recommended.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-UniversalGroupCachingEnabled<Boolean>

If this parameter is true, it indicates this site caches universal groups, which are those groups cached on global catalog (GC) servers. It can be useful in sites with no GC servers available locally.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-UniversalGroupCachingRefreshSite<ADReplicationSite>

If universal group caching is enabled, this parameter sets the name of the site from which the cache is pulled.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WindowsServer2000BridgeheadSelectionMethodEnabled<Boolean>

Implements the Windows 2000 Server method of selecting a single bridgehead server per directory partition and transport.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WindowsServer2000KCCISTGSelectionBehaviorEnabled<Boolean>

When enabled, this parameter implements the Windows 2000 Server method of Intersite Topology Generator (ISTG) selection. By default, it is disabled.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WindowsServer2003KCCBehaviorEnabled<Boolean>

Implements Kerberos consistency checker (KCC) operation that is consistent with Windows Server 2003 forest functional level. This option can be set if all domain controllers in the site are running Windows Server 2003.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WindowsServer2003KCCIgnoreScheduleEnabled<Boolean>

When the forest functional level Windows Server 2003 or Windows Server 2003 interim is in effect, provides KCC control of the ability to ignore schedules (replication occurs at the designated intervals and is always available).

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WindowsServer2003KCCSiteLinkBridgingEnabled<Boolean>

When the forest functional level Windows Server 2003 or Windows Server 2003 interim is in effect, provides Kerberos consistency checker (KCC) control of the ability to enable or disable site link bridging.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Confirm

Prompts you for confirmation before running the cmdlet.

Required?	false
Position?	named
Default Value	false
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Required?	false
Position?	named
Default Value	false
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

None or Microsoft.ActiveDirectory.Management.ADReplicationSite

A site object is received by the Identity parameter.

A site object that was retrieved by using the Get-ADReplicationSite cmdlet and then modified is received by the Instance parameter.

Outputs

The output type is the type of the objects that the cmdlet emits.

None or Microsoft.ActiveDirectory.Management.ADReplicationSite

Examples

-------------------------- EXAMPLE 1 --------------------------

Description

-----------

Set the properties of the site with name 'NorthAmerica' to prevent its intersite topology generator (ISTG) at ‘corp-DC02’ from generating connections for intersite replication.

C:\PS>Set-ADReplicationSite NorthAmerica -InterSiteTopologyGenerator corp-DC02 -AutomaticInterSiteTopologyGenerationEnabled $false

-------------------------- EXAMPLE 2 --------------------------

Description

-----------

Returns all the sites in the directory and sets the ScheduleHashingEnabled propertyto spread replication start times randomly across the entire schedule interval rather than just the first quarter of the interval..

C:\PS>Get-ADReplicationSite -Filter * | % {Set-ADReplicationSite $_ -ScheduleHashingEnabled $true}

-------------------------- EXAMPLE 3 --------------------------

Description

-----------

Set the daily replication schedule of the site with name 'Asia'.

C:\PS>$schedule = New-Object -TypeName System.DirectoryServices.ActiveDirectory.ActiveDirectorySchedule;
$schedule.ResetSchedule();
$schedule.SetDailySchedule("Twenty","Zero","TwentyTwo","Thirty");
Set-ADReplicationSite "Asia" -ReplicationSchedule $schedule

Get-ADReplicationSite

New-ADReplicationSite

Remove-ADReplicationSite

Set-ADReplicationSite