Get-RemoteAccessConnectionStatistics

Get-RemoteAccessConnectionStatistics

Displays the statistics of real-time, currently active DirectAccess (DA) and VPN connections and the statistics of DA and VPN historical connections for a specified time duration.

구문

Parameter Set: ActiveStatistics
Get-RemoteAccessConnectionStatistics [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-ResourceName <String> ] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: AccountingStatistics
Get-RemoteAccessConnectionStatistics [[-StartDateTime] <DateTime> ] [[-EndDateTime] <DateTime> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

자세한 설명

The Get-RemoteAccessConnectionStatistics cmdlet displays the statistics of the real-time, currently active DirectAccess (DA) and VPN connections and the statistics of DA and VPN historical connections for a specified time duration

The statistics for active and historical connections starting or ending on a Remote Access (RA) server are stored in the inbox accounting store on that server. This cmdlet retrieves statistics for a specific server. This cmdlet is not impacted by multi-site deployment.
-- If neither a start date nor an end date is specified, then statistics for active connections is retrieved.
-- In order to retrieve statistics of historical data, a time duration needs to be specified such as a start date, an end date, or both. If only one of them is specified then the time stamp on the first or last record in the accounting database is used to fill the missing information and to create a duration time.

The statistics of active connections can be explicitly filtered by the resource accessed over the connections or by the security group that users who originated the connections belong to. These filters are not available for statistics of historical connections.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the computer on which the RA server computer specific tasks should be run. When this parameter is specified, the statistics on the RA server are retrieved.

별칭

Cn

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-EndDateTime<DateTime>

Specifies the time duration for which the statistics of historical connections is to be retrieved and indicates the end date. If a date is not specified, then the time stamp of the last record in the accounting database is used by default.

별칭

없음

필수 여부

false

위치

3

기본값

Date stamp of last record

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-ResourceName<String>

Enables a user to filter the statistics of active connections based on the server, or resource, that the end-user is accessing. This parameter indicates the IP address or host name of the server, or resource, that a user is accessing.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-RoutingDomain<String>

Specifies the name of the routing domain.

별칭

RoutingDomainName

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByPropertyName)

와일드카드 문자 허용 여부

false

-StartDateTime<DateTime>

Specifies the time duration for which the statistics of historical connections is to be retrieved and indicates the start date. If a date is not specified, then the time stamp of the first record in the accounting database is used by default.

별칭

없음

필수 여부

false

위치

2

기본값

Date stamp of first record

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

  • None

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • Microsoft.Management.Infrastructure.CimInstance#RemoteAccessConnection[]

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
    For real-time statistics, the array of RemoteAccessConnection objects consists of the following properties. A separate instance of the object is output for every connection.
    -- The user name of the user logged in.
    -- The state of user activity on the connection, idle or active.
    -- The bandwidth used by the connection.
    -- The IPv4 address of the client computer.
    -- The IPv6 address of the client computer.
    -- The host name of the client computer.
    -- The internet-facing IP address of the client.
    -- The tunnel type: VPN tunnel or ESP tunnel for DA.
    -- The transition technology used in the DA connection: native IPv6, Teredo, IPHTTPS, Isatap, 6to4.
    -- The time stamp when the connection was setup.
    -- The time duration of connection.
    -- The total number of bytes received on the connection so far.
    -- The total number of bytes sent on the connection so far.
    -- The connection type: DA or VPN.
    -- The health status: Indicates the NAP health status.
    -- The authentication method used to authenticate the user and computer in VPN and DA.
    For accounting statistics, the array of RemoteAccessConnection objects consists of the following properties. A separate instance of the object is outputted for every connection.
    -- The user name of the user logged in.
    -- The IPv4 address of the client computer.
    -- The IPv6 address of the client computer.
    -- The host name of the client computer.
    -- The internet-facing IP address of the client.
    -- The tunnel type: VPN tunnel or ESP tunnel for DA.
    -- The transition technology used in the DA connection: native IPv6, Teredo, IPHTTPS, Isatap, 6to4.
    -- The time stamp when the connection was setup.
    -- The time duration of connection.
    -- The total number of bytes received on the connection so far.
    -- The total number of bytes sent on the connection so far.
    -- The connection type: DA or VPN.
    -- The health status: Indicates the NAP health status.
    -- The authentication method used to authenticate the user and computer in VPN and DA.

예제

EXAMPLE 1

This example disconnects the connection by specifying the IP address of the host from which it originates. The output of the disconnect cmdlet displays the IP address of the disconnected host. For this example there is one active VPN connection. The output of this cmdlet is piped to the Format-List cmdlet to display the details of the active connection in a list format.

PS C:\> Get-RemoteAccessConnectionStatistics | Format-List –Property *
PS C:\> Disconnect-VpnUser -HostIPAddress 10.1.1.11 -PassThru10.1.1.11
PS C:\> Get-RemoteAccessConnectionStatistics | Format-List –Property *

EXAMPLE 2

This example gets a list of historic connections and export them to a .csv file.

A start and an end date boundaries are first established for the required data using the Get-Date cmdlet.

PS C:\> $startdate = Get-Date –Date "12/16/2011"
PS C:\> $enddate = Get-Date –Date "12/23/2011"

This cmdlet gets all of the connections made between start and end date and pipes it into the Export-Csv cmdlet to generate a .csv file.

PS C:\> Get-RemoteAccessConnectionStatistics –StartDateTime $startdate –EndDateTime $enddate | Export-Csv –Path "data.csv"

EXAMPLE 3

This example exports a list of historic connections up to a specific date.

PS C:\> $enddate = Get-Date –Date "12/23/2011"

The data is exported from server start date to the specified end date. Note: The starting date does not need to be explicitly specified here.

PS C:\> Get-RemoteAccessConnectionStatistics –EndDateTime $enddate | Export-Csv –Path "data.csv"

관련 항목

Get-RemoteAccessConnectionStatisticsSummary

Export-Csv

Format-List

Get-Date