Get-RemoteAccessLoadBalancer
Get-RemoteAccessLoadBalancer
Displays load balanced cluster settings.
구문
Parameter Set: Get0
Get-RemoteAccessLoadBalancer [[-EntrypointName] <String> ] [-Brief] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Get-RemoteAccessLoadBalancer cmdlet displays the following:
-- A list of servers in the cluster.
-- The status of each server.
-- The VPN IP address range for each server, if VPN is enabled.
-- A list of the internal and external virtual IP addresses (VIPs) in the cluster.
-- The status of the third-party load balancer.
매개 변수
-Brief
Indicates that the cmdlet suppresses retrieving node status. If you specify this parameter, the cmdlet returns only the host name of each node.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the IPv4 or IPv6 address, or host name, of the server on which the cmdlet runs.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-EntrypointName<String>
Specifies the name of the entry point in the multi-site deployment for which the load balancing configuration should be retrieved.
별칭 |
none |
필수 여부 |
false |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
- None
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
Microsoft.Management.Infrastructure.CimInstance#RemoteAccessLoadBalancer
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
The RemoteAccessLoadBalancer object consists of the following properties:
The list of nodes in the cluster and the following properties for each node:
-- IPv4 or IPv6 address or host name of the node.
-- The load balancing status of each node.
-- IPv4 address ranges configured on each node for the VPN static pool address assignment.
-- Status of third party load balancer: Enabled or Disabled.
-- The list of internet virtual IP addresses.
-- The list of internal virtual IP addresses.
예
EXAMPLE 1
This example retrieves the NLB status of the site named Edge1_Site.
PS C:\> Get-RemoteAccessLoadBalancer –EntryPointName Edge1_Site
관련 항목
Add-RemoteAccessLoadBalancerNode