Set-VpnAuthProtocol
Set-VpnAuthProtocol
Sets the authentication method for incoming site-to-site (S2S) VPN interfaces on a Routing and Remote Access (RRAS) server.
구문
Parameter Set: Set1
Set-VpnAuthProtocol [-AsJob] [-CertificateAdvertised <X509Certificate2> ] [-CertificateEKUsToAccept <String[]> ] [-CimSession <CimSession[]> ] [-PassThru] [-RootCertificateNameToAccept <X509Certificate2> ] [-SharedSecret <String> ] [-ThrottleLimit <Int32> ] [-TunnelAuthProtocolsAdvertised <String> ] [-UserAuthProtocolAccepted <String[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-VpnAuthProtocol cmdlet configures how the incoming site-to-site (S2S) VPN Interfaces on a Routing and Remote Access (RRAS) server are authenticated, such as when the server is a responder for incoming connections whose authentication method is EAP or computer certificates (machine certificates).
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CertificateAdvertised<X509Certificate2>
Specifies the certificate to be sent to a peer computer. Applicable only if the TunnelAuthProtocolsAdvertised parameter is set to Certificate.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CertificateEKUsToAccept<String[]>
Specifies an array of Certificate Extended Key Usage (EKU) extensions to allow. This parameter is only valid if the UserAuthProtocolAccepted parameter contains certificates.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RootCertificateNameToAccept<X509Certificate2>
Specifies the root certificates that are allowed. Applicable only if the UserAuthProtocolAccepted parameter contains certificates.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SharedSecret<String>
Specifies the text of the shared secret for the connection. Applicable only if the TunnelAuthProtocolsAdvertised parameter is set to PSK.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-TunnelAuthProtocolsAdvertised<String>
Specifies the remote authentication method used by the RRAS server. If this parameter value is set to pre-shared key (PSK), then the SharedSecret parameter is mandatory. If this parameter value is set to Certificate, then the CertificateAdvertised parameter is mandatory. Only one of the values can be specified.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-UserAuthProtocolAccepted<String[]>
Specifies the local authentication protocols that are allowed.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#VpnAuthProtocol
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example changes the authentication method used by the server for incoming connections to Certificate and advertises certificates as authentication mechanism to the peer computers.
PS C:\> Set-VpnAuthProtocol -UserAuthProtocolAccepted Certificate -PassThru
EXAMPLE 2
This example sets the root certificate against which all of the incoming connections computer certificates are matched.
PS C:\> $cert1 = ( Get-ChildItem -Path cert:LocalMachine\root | Where-Object -FilterScript { $_.Subject -Like "*CN=Contoso Root Certification Authority,*" } )
PS C:\> Set-VpnAuthProtocol -RootCertificateNameToAccept $cert1 -PassThru
관련 항목
Clear-VpnS2SInterfaceStatistics
Get-VpnServerIPsecConfiguration
Set-VpnServerIPsecConfiguration