Add-DAMgmtServer
Add-DAMgmtServer
Adds the specified Management servers to the DirectAccess (DA) deployment.
구문
Parameter Set: Add0
Add-DAMgmtServer [-MgmtServer] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-DAMgmtServer cmdlet adds the specified Management servers to the DirectAccess (DA) deployment. Management server here refers to update servers, Domain Controllers, and other servers.
Management server configuration is applicable globally, to the entire DA deployment and therefore is not impacted by multi-site deployments.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the IPv4 or IPv6 address, or host name, of the computer on which the remote access server computer specific tasks should be run.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MgmtServer<String[]>
Specifies the list of management servers specified by IPv4 or IPv6 address, subnet or host name.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByValue) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
System.String[]
The array of strings consists of the following properties:
List of management servers that were successfully added to the DA deployment.
예제
EXAMPLE 1
This example will try to resolve the given servers to IP address and once resolved, the IP addresses would be added to the list of management servers configured for direct access. Management server configuration is global and hence this will be added to all server GPOs.
PS C:\> Add-DAMgmtServer -MgmtServer patch1.corp.contoso.com