Add-DAEntryPoint
Add-DAEntryPoint
Adds an entry point to a multi-site deployment.
구문
Parameter Set: Add0
Add-DAEntryPoint [-Name] <String> -ConnectToAddress <String> -RemoteAccessServer <String> [-AsJob] [-CimSession <CimSession[]> ] [-ClientIPv6Prefix <String> ] [-ComputerName <String> ] [-DeployNat] [-Force] [-GslbIP <IPAddress> ] [-InternalInterface <String> ] [-InternetInterface <String> ] [-NoPrerequisite] [-PassThru] [-ServerGpoName <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-DAEntrypoint cmdlet adds an entry point to a multi-site deployment. This cmdlet checks that the server complies with the prerequisites for DirectAccess deployment, and adds the server as an entry point.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ClientIPv6Prefix<String>
Specifies the IPv6 address prefix assigned to remote clients connecting over IP-HTTPS. The prefix length must be 59
or 64
bits.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the name or address, either IPv4 or IPv6, of a server or server cluster in the multi-site deployment.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ConnectToAddress<String>
Specifies the public name, or IPv4 address, of the Remote Access server, or network address translation (NAT) server, to which remote clients connect.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DeployNat
Indicates that the server or server cluster is deployed behind a NAT device.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-GslbIP<IPAddress>
Specifies the IPv4 or IPv6 dedicated IP address (DIP) of the server, or the virtual IP address (VIP) of the server cluster, to be used for global load balancing.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InternalInterface<String>
Specifies the name of the internal network adapter of the first server in the entry point.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InternetInterface<String>
Specifies the name of the external network adapter of the first server in the entry point.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name to be assigned to the entry point.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NoPrerequisite
Indicates that a prerequisite check for DirectAccess deployment requirements should not be performed.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RemoteAccessServer<String>
Specifies the name or IP address, IPv4 or IPv6, of the server that will be the first server in the entry point.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ServerGpoName<String>
Specifies the name of the GPO in which DirectAccess server configuration settings for the entry point are stored. The GPO is created in the domain that contains the server specified in RemoteAccessServer.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#DAEntryPoint
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
Example 1
This example adds the edge server named da2.domain1.corp.contoso.com to the multi-site deployment, names the server Entry Point 2 and declares CorpNet1 as the network interface which is connected to the corporate internal network. Since the company uses IPv6 prefixes, IPHTTPS remote clients will connect via ep2.da.contoso.com using predefined prefix 3000:0:30:2000::/64.
PS C:\> Add-DAEntryPoint -Name "Entry Point 2" -InternalInterface CorpNet1 -RemoteAccessServer "da2.domain1.corp.contoso.com" -InternetInterface Internet -ClientIPv6Prefix 3000:0:30:2000::/64 -ConnectToAddress "ep2.da.contoso.com" -PassThru -Force
To validate the name of the GPO which was created by this cmdlet, the following script should be used.
PS C:\> $daServer = Get-DAServer -EntrypointName "Entry Point 2"
PS C:\> $daServer.ServerConfiguration.GpoName
In addition, running the Get-DAMultiSite cmdlet displays the newly added entry point.
PS C:\> Get-DAMultiSite
Example 2
This example adds the edge server named da2.domain1.corp.contoso.com to the multi-site deployment, names the server Entry Point 2 and declares CorpNet1 as the network interface which is connected to the corporate internal network using a pre-created GPO domain2.corp.contoso.com\EP2ServerGpo.
PS C:\> Add-DAEntryPoint -Name "Entry Point 2" -InternalInterface CorpNet1 -RemoteAccessServer "da2.domain1.corp.contoso.com" -InternetInterface Internet -ClientIPv6Prefix 3000:0:30:2000::/64 -ConnectToAddress "ep2.da.contoso.com" -ServerGpoName "domain1.corp.contoso.com\EP2ServerGpo" -PassThru –Force
To validate, the following script should be used.
PS C:\> $daServer = Get-DAServer -EntrypointName "Entry Point 2"
PS C:\> $daServer.ServerConfiguration.GpoName
Example 3
This example adds the edge server named da2.domain1.corp.contoso.com to the multi-site deployment, names the server Entry Point 2 and declares CorpNet1 as the network interface which is connected to the corporate internal network behind the NAT named DeployNat , with a defined internet interface named DMZNet1 and directs clients to connect to the entry point through ep2dmz.da.contoso.com.
PS C:\> Add-DAEntryPoint -Name "Entry Point 2" -InternalInterface CorpNet1 -RemoteAccessServer "da2.domain1.corp.contoso.com" -InternetInterface Internet -ClientIPv6Prefix 3000:0:30:2000::/64 -ConnectToAddress "ep2dmz.da.contoso.com" -ServerGpoName "domain1.corp.contoso.com\EP2ServerGpo" -PassThru –Force
Example 4
This example adds the edge server named da2.domain1.corp.contoso.com to the multi-site deployment, names the server Entry Point 2 and declares CorpNet1 as the network interface which is connected to the corporate internal network using GSLB and the IP address for Entry Point 2 is 137.5.0.50.
PS C:\> Add-DAEntryPoint -Name "Entry Point 2" -InternalInterface CorpNet1 -RemoteAccessServer "da2.domain1.corp.contoso.com" -InternetInterface Internet -ClientIPv6Prefix 3000:0:30:2000::/64 -ConnectToAddress "ep2.da.contoso.com" –GslbIP "137.5.0.50" -PassThru -Force