Get-RemoteAccessUserActivity

Get-RemoteAccessUserActivity

Displays the resources accessed over the active DirectAccess (DA) and VPN connections and the resources accessed over historical DA and VPN connections.

구문

Parameter Set: UserName
Get-RemoteAccessUserActivity [-UserName] <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-EndDateTime <DateTime> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-StartDateTime <DateTime> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: HostIP
Get-RemoteAccessUserActivity -HostIPAddress <String> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-EndDateTime <DateTime> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-StartDateTime <DateTime> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: SessionId
Get-RemoteAccessUserActivity -SessionId <UInt64> [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]

자세한 설명

The Get-RemoteAccessUserActivity cmdlet displays the resources accessed over the active DirectAccess (DA) and VPN connections and the resources accessed over historical DA and VPN connections.

The resources accessed over active and historical connections starting or ending on a Remote Access server are stored in the inbox accounting store on that server. This cmdlet retrieves the resources accessed for a specific server. The cmdlet is not impacted by multi-site deployment.
-- If a start date nor an end date is specified, then the resources accessed over active connections are retrieved
-- In order to retrieve the list of resources accessed over historical connections, a time duration needs to be specified such as a start date, an end date, or both. If only one of them is specified, then the time stamp on the first or last record in the accounting database is used to fill the missing information and create a duration.

The statistics of active connections can be explicitly filtered by the user name of the user who originated the Remote Access connection and the tunnel IP address of the client computer such as the IP address assigned by the server, from which the connection originated. However, only one of these filters can be used at a time.

매개 변수

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the computer on which the remote access server computer specific tasks should be run.

-EndDateTime<DateTime>

Specifies the time duration for which the user activity needs to be retrieved and indicates the end date.

-HostIPAddress<String>

Specifies the tunnel IP address of the connection. This can be an IPv4 or IPv6 address.

-InformationAction<System.Management.Automation.ActionPreference>

-InformationVariable<System.String>

-SessionId<UInt64>

Specifies an ID for a session for which to retrieve user activity data.

-StartDateTime<DateTime>

Specifies the time duration for which the user activity needs to be retrieved and indicates the start date.

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.

-UserName<String>

Specifies the user whose activity needs to be retrieved. This parameter uses the DOMAIN\USERNAME format.

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)

<WorkflowParameters>

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

• None

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

• Microsoft.Management.Infrastructure.CimInstance#RemoteAccessUserActivity[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
  For both real-time and accounting cases, the RemoteAccessUserActivity object consists of the following properties. A separate instance of the RemoteAccessUserActivity object is output for every corporate network resource that is accessed over the connection.
  -- The IP address of the server in the corporate network.
  -- The identity of the protocol used to access the server.
  -- The port number used to access the server.

예

EXAMPLE 1

This example shows historic access details for a particular user. Query the accounting store for user activity details for User1 between the start date and end date.

PS C:\> $startdate = Get-Date –Date "12/16/2011"

PS C:\> $startdate

PS C:\> $enddate = Get-Date –Date "12/23/2011"

PS C:\> $enddate

PS C:\> Get-RemoteAccessUserActivity -StartDateTime $startdate -EndDateTime $enddate -UserName "corp.contoso.com\User1"

EXAMPLE 2

This example shows the resources currently being accessed by the user named User1. If the user is not active currently, then the cmdlet will not return any rows.

PS C:\> Get-RemoteAccessUserActivity -UserName "contoso\User1" -ComputerName edge1.corp.contoso.com

관련 항목

Get-Date