Set-DANetworkLocationServer

Set-DANetworkLocationServer

Configures the Network Location Server (NLS).

구문

Parameter Set: ExternalServer
Set-DANetworkLocationServer [-Url] <String> [-CheckReachability] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Parameter Set: OnDAServer
Set-DANetworkLocationServer -NlsOnDAServer [-Certificate <X509Certificate2> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

자세한 설명

The Set-DANetworkLocationServer cmdlet configures the Network Location Server (NLS). The NLS can be present on the DirectAccess (DA) server or on some other highly available server

NLS configuration is applicable globally. It is either present on every DA server or when present on a separate, highly available server it acts as the NLS for all DA clients. Hence this cmdlet is not impacted by multi-site deployments.

The IIS role and IP and Domain Restrictions role service are required on the DA server if it has to be configured as the NLS. These roles get automatically installed during Remote Access installation itself.

If the NLS is already configured on the DA server and this cmdlet is used to move it to a different computer, then this cmdlet does not uninstall IIS and IP and Domain Restrictions roles.

매개 변수

-Certificate<X509Certificate2>

Specifies the certificate to be used when the NLS is configured to be on the DA server.

-CheckReachability

Performs a reachability check to the specified URL and configures the NLS on that server only if the URL is reachable.

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the computer on which the DA server computer specific tasks should be run.

-Force

사용자에게 확인 메시지를 표시하지 않고 명령을 강제 실행합니다.
When suppressed the cmdlet assumes user confirmation for the following conditions.
-- Creation of self-signed certificate when configuring the NLS on the DA server.
-- Moving the NLS from the DA server to an external server: The corresponding URL on the DA server is decommissioned. Clients outside corpnet will not receive the updated policies. When the clients enter corporate network, the URL will be inaccessible and the clients will be detected to be outside corporate network. As a result the client will not be able to access corporate resources.

-InformationAction<System.Management.Automation.ActionPreference>

-InformationVariable<System.String>

-NlsOnDAServer

Specifies that NLS should be configured on the DA Server, that is the server on which the cmdlet is run.
In order for the DA server to act as a NLS an appropriate certificate is required to be installed on the server. By default the cmdlet looks for a certificate on the server. In case of multi-site, load balancing configuration, or multi-site and load balancing configuration the certificate has to be present on all of the servers.
If a certificate is not found, then a self-signed certificate is created for this purpose. Before creating the self-signed certificate the cmdlet asks for user confirmation. If the user wishes to specify a certificate explicitly, then the Certificate parameter can be used.

-PassThru

작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.

-Url<String>

Specifies the URL of a website hosted on a highly available external server which is used as the NLS that provides clients with location information.

-Confirm

cmdlet을 실행하기 전에 확인 메시지를 표시합니다.

-WhatIf

cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)

<WorkflowParameters>

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

• None

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

• Microsoft.Management.Infrastructure.CimInstance#DANetworkLocationServer

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
  The DANetworkLocationServer object consists of the following properties:
  -- If the NLS is configured on the DA server or on a different server.
  -- The URL used for detecting whether a remote computer is inside or outside the corporate network (if NLS is configured on a different server).
  -- The certificate used for NLS (if it is configured on the DA server).
  -- Reachability of the NLS (if on a different server).

예

EXAMPLE 1

This example configures the NLS on the DA server. This cmdlet first looks for an appropriate certificate on the DA computer itself. Since it is not able to find one it decides to create a self-signed certificate and prompts the user to accept before going ahead and creating one.

PS C:\> Set-DANetworkLocationServer -NlsOnDAServer -PassThru

EXAMPLE 2

This example looks for an appropriate certificate for NLS and manually uses the certificate to configure the NLS on the DA server.
All the certificates will be retrieved from local computer store. This list will be filtered on the certificate for our DA server edge1 to obtain the SSL certificate required. This certificate is then passed to this cmdlet to configure NLS. Since DA NLS configuration is global it will be created on all Client GPOs.

PS C:\> $a = Get-ChildItem –Path cert:\localmachine\my

PS C:\> $cert = $a | Where-Object -Property Subject -Value CN=edge1.corp.contoso.com -Clike

PS C:\> Set-DANetworkLocationServer -NlsOnDAServer -Certificate $cert

EXAMPLE 3

This example configures an external server as the NLS by specifying the URL https://nsl.corp.contoso.com hosted on that server. Since the NLS is configured on the DA server in the setup this cmdlet will prompt, that the users which do not receive the new policies resulting from this change will not be able to access internal resources when inside the corporate network as they will be detected to be outside the corporate network. Once the user confirms to the prompt, this cmdlet first checks whether the given URL is reachable and if it is reachable then it sets this URL in the DA configuration.

PS C:\> Set-DANetworkLocationServer -Url https://nsl.corp.contoso.com -CheckReachability -PassThru

If the NLS is moved to another computer, then clients without updated GPOs will not be able to connect to the new location. When these clients are located in the internal network they will not be able to connect to internal resources as expected.

PS C:\> 

관련 항목

Get-DANetworkLocationServer

Get-ChildItem

Where-Object