Set-DAEntryPointDC
Set-DAEntryPointDC
Modifies domain controller (DC) settings for the entry point.
구문
Parameter Set: ChangeByDCName
Set-DAEntryPointDC -ExistingDC <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-NewDC <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ChangeByEntryPoint
Set-DAEntryPointDC -EntryPointName <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-NewDC <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DAEntryPointDC cmdlet modifies domain controller (DC) settings for entry points, and can be used to the following:
-- Assigns a DC to all entry points previously assigned to the DC specified in the ExistingDC parameter. This is useful when a DC is no longer reachable and entry points settings must be updated.
-- Assigns a DC to a specific entry point. This is useful for optimization, such as improving the Group Policy propagation time by specifying a DC that is located within the same Active Directory site as the other servers in an entry point.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies theIPv4 or IPv6 address, or host name, of a server included in the entry point.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-EntryPointName<String>
Specifies the name of the entry point for which the DC is be updated.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ExistingDC<String>
Specifies the fully qualified domain name (FQDN) of the existing DC that will be updated.
별칭 |
DomainControllerName |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewDC<String>
Specifies the FQDN of the new DC.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#DADomainController[]
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
The array of DADomainController objects that contains the following properties:
-- ChangeByDCName: Provides a list of entry points for which the associated DCs have been changed, and the name of the new DC. The ExistingDC parameter has a specified value. The EntryPointName parameter does not have a specified value.
-- ChangeByEntryPoint: Provides information about the specified entry point and its updated DC. The ExistingDC parameter does not have a specified value. The EntryPointName parameter has a specified value.
예제
EXAMPLE 1
This example associates Entry Point 1 with the DC named dc3.domain1.corp.contoso.com.
PS C:\> Set-DAEntryPointDC –EntryPointName "Entry Point 1" –NewDC "DC3.Domain1.corp.company.com" –Force –PassThru
EXAMPLE 2
This example automatically picks the DC named dc3.domain1.corp.contoso.com is the closest to the server named da1.domain1.corp.contoso.com and associate the DC with Entry Point 1, because the NewDC parameter is not specified.
PS C:\> Set-DAEntryPointDC –EntryPointName "Entry Point 1" -ComputerName "da1.domain1.corp.contoso.com" –Force -PassThru
EXAMPLE 3
This example associates all of the entry points which were previously associated with the DC named dc1.domain1.corp.contoso.com with the DC named dc3.domain1.corp.contoso.com.
PS C:\> Set-DAEntryPointDC –ExistingDC "dc1.domain1.corp.contoso.com" -NewDC "dc3.domain1.corp.contoso.com" –Force -PassThru