Set-RemoteAccessRadius

Set-RemoteAccessRadius

Edits the properties associated with an external RADIUS server being used for VPN authentication, accounting for DirectAccess (DA) and VPN, and one-time password (OTP) authentication for DA.

구문

Parameter Set: Set3
Set-RemoteAccessRadius [-ServerName] <String> [-Purpose] <String> {Authentication | Accounting | Otp} [-AccountingOnOffMsg <String> {Enabled | Disabled | } ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-EntrypointName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-MsgAuthenticator <String> {Enabled | Disabled | } ] [-PassThru] [-Port <UInt16> ] [-Score <Byte> ] [-SharedSecret <String> ] [-ThrottleLimit <Int32> ] [-Timeout <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

자세한 설명

The Set-RemoteAccessRadius cmdlet edits the properties associated with an external RADIUS server being used for VPN authentication, accounting for DirectAccess (DA) and VPN, and one-time password (OTP) authentication for DA.
-- Accounting RADIUS configuration applies to both DA and VPN.
-- OTP RADIUS configuration applies only to DA.
-- Authentication RADIUS configuration applies only to VPN.

A RADIUS server configuration for Accounting and OTP are global in nature, such as applying the entire Remote Access (RA) deployment. A RADIUS server configuration for VPN applies only to a specific VPN server, and all servers in a load balancing cluster, or if multi-site is deployed, to all VPN servers at a site.

Following describes aspects of the cmdlet behavior:
-- The purpose for which a RADIUS server is currently being used cannot be changed using this cmdlet. Only the other properties of the server can be modified.
-- The RADIUS server properties for authentication and accounting are the same except for the AccountingOnOffMsg parameter which is applicable only to accounting RADIUS and the MsgAuthenticator parameter which is applicable only to RADIUS authentication. These parameters are not relevant for DA OTP authentication.
-- If a user tries to edit the properties of a RADIUS server for a particular purpose but specifies a parameter that is not applicable to that purpose, then this cmdlet will still run but the parameter will be ignored and a warning message will be displayed. The other parameters specified will still be modified.

매개 변수

-AccountingOnOffMsg<String>

Specifies the enabled state for sending of accounting on and off messages. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Enabled.
-- Disabled.
This parameter is applicable only when the RADIUS server is being added for RA accounting.

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the computer on which the RA server computer specific tasks should be run.

-EntrypointName<String>

Specifies a site in a multi-site deployment. This parameter is applicable only to RADIUS server configuration for VPN authentication. This parameter is not applicable to RADIUS accounting and OTP.
If this parameter is specified when editing, then it indicates that the properties of the RADIUS server for VPN authentication should be modified for that site.
If an entry point is not specified in a multi-site deployment, then the entry point to which the server on which the cmdlet is run belongs is used. The server could also be represented by using the ComputerName parameter.
If this parameter and the ComputerName parameter are specified and the ComputerName parameter does not belong to the site represented by this parameter, then this parameter takes precedence and the RADIUS server is added to it.

-InformationAction<System.Management.Automation.ActionPreference>

-InformationVariable<System.String>

-MsgAuthenticator<String>

Specifies the enabled state for the usage of message authenticator. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Enabled.
-- Disabled.
This parameter is applicable only when the RADIUS server is being added for VPN authentication.

-PassThru

작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-Port<UInt16>

Specifies the port number on which the RADIUS server is accepting authentication requests.

-Purpose<String>

Specifies the purpose of the RADIUS server for which the settings are being modified. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Authentication.
-- Accounting.
-- Otp.

-Score<Byte>

Specifies the initial score.

-ServerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the external RADIUS server for which the properties are being modified for the specified purpose.

-SharedSecret<String>

Specifies the shared secret between the VPN server and the specified external RADIUS server. Note: The secret is specified in plain text.

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.

-Timeout<UInt32>

Specifies the time-out value, in seconds.

-Confirm

cmdlet을 실행하기 전에 확인 메시지를 표시합니다.

-WhatIf

cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)

<WorkflowParameters>

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

• None

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

• Microsoft.Management.Infrastructure.CimInstance#RemoteAccessRadiusServer[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
  The array of RemoteAccessRadiusServer objects consists of the following properties:
  -- The IPv4 or IPv6 address or host name of the RADIUS server that was modified.
  -- The purpose for which the server was modified: VPN authentication, accounting or OTP.
  -- The RADIUS initial score.
  -- The RADIUS timeout in seconds.
  -- The RADIUS port number.
  -- The RADIUS shared secret: for security reasons, this property is never populated and will always show as blank.
  -- The status of accounting on/off messages: if the RADIUS server was modified for authentication or OTP, then this property is always blank.
  -- The status of message authenticator: if the RADIUS server was modified for accounting or OTP, then this property is always blank.

예

EXAMPLE 1

This example configures time out and shared secret properties of the RADIUS server named 10.1.2.1 that is being used for the purpose of VPN authentication.

PS C:\> Set-RemoteAccessRadius -ServerName 10.1.2.1 -Purpose Authentication -Timeout 10 -SharedSecret "n3ws3cr3t" -PassThru

관련 항목

Add-RemoteAccessRadius

Get-RemoteAccessRadius

Remove-RemoteAccessRadius

Set-RemoteAccessRadius