Get-DAClient

Get-DAClient

Displays the list of client security groups that are part of the DirectAccess (DA) deployment and the client properties.

구문

Parameter Set: Get0
Get-DAClient [[-EntrypointName] <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]

자세한 설명

The Get-DAClient cmdlet displays the list of client security groups that are part of the DirectAccess (DA) deployment and the client properties.

The output displayed consists of the following.
-- DA client properties, which are globally applicable to all clients, such as the status of force tunneling, suffix list in the Name Resolution Policy Table (NRPT) entry corresponding to force tunneling, status of policy to deploy DA only on laptops and notebooks and not on all of the computers in the domain, status of whether appropriate policies should be deployed on down level clients () clients such that they too can connect to the Windows Server® 2012 DA Server.
-- Client Security Groups and Group Policy Objects (GPOs).
-- If multi-site is deployed then the SGs and GPOs of down-level clients belonging to a site (such as clients that can connect to a site). The EntryPoint parameter is used to specify the site.

매개 변수

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the computer on which the Remote Access server computer specific tasks should be run.

-EntrypointName<String>

Specifies the identity of a site in a multi-site deployment. When specified only those down-level security groups and GPOs that belong to the specified site (such as these clients connect only to this site) are displayed. However, all Windows? 8 security groups and GPOs are displayed as they are independent of site.
If there is a multi-site deployment, then down-level client security group and GPO information is always retrieved only for a specific site. If this parameter is not specified, then the site to which the computer on which the cmdlet is run is used (the user may or may not be specifying a computer name). It is not possible to retrieve all the down-level security groups and GPOs across all sites.
If both this parameter and the ComputerName parameter are specified and the computer name does not belong to the site represented by the entry point, then this parameter takes precedence and the authentication type is configured for it.
If there is no multi-site deployment but user specifies this parameter, then the cmdlet returns an error message.

-InformationAction<System.Management.Automation.ActionPreference>

-InformationVariable<System.String>

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)

<WorkflowParameters>

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

• None

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

• Microsoft.Management.Infrastructure.CimInstance#DAClient

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
  The output object contains the following properties:
  -- The list of client security groups present in the DA deployment.
  -- The list of client GPOs present in the DA deployment.
  -- The status of force tunnel.
  -- The NRPT object (for force tunnel properties).
  -- The status of the policy to deploy DA only on laptops and notebooks and not on all of the computers in the domain.
  -- The status of whether appropriate policies should be deployed on down-level clients (Windows? 7) to enable the clients to connect to the Windows Server 2012 DA Server.
  If multi-site is enabled, then the following additional properties are present:
  -- The name of the entry point (identity of a site) to which down-level clients are added.
  -- The name of the down-level client GPO.
  -- The list of security groups of down-level clients.

예

EXAMPLE 1

This example retrieves DAClient properties applicable to all clients in the site 1-Edge-Site. As can be seen from the output, the cmdlet lists down all the security groups currently configured for DA and the client GPO. In addition, it gets status of force tunneling and whether DA is provisioned for Down level clients. The OnlyRemoteComputers property refers to whether the WMI filter to provision DA only for remote laptops and notebooks is enabled. The Downlevel property is not applicable in this case since it is a multi-site setup.

PS C:\> Get-DAClient -EntryPointName 1-Edge-Site

관련 항목

Add-DAClient

Remove-DAClient

Set-DAClient