Set-RemoteAccessLoadBalancer
Set-RemoteAccessLoadBalancer
Configures load balancing on the Remote Access (RA) server or the cluster server.
구문
Parameter Set: EnableLoadBalancing
Set-RemoteAccessLoadBalancer [-InternetDedicatedIPAddress] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InternalDedicatedIPAddress <String[]> ] [-InternalVirtualIPAddress <String[]> ] [-InternetVirtualIPAddress <String[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-UseThirdPartyLoadBalancer] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: DisableLoadBalancing
Set-RemoteAccessLoadBalancer -Disable [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ThirdPartyLoadBalancer
Set-RemoteAccessLoadBalancer -ThirdPartyLoadBalancer <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-RemoteAccessLoadBalancer cmdlet configures load balancing for a Remote Access (RA) deployment.
-- The InternalDedicatedIPAddress and InternalVirtualIPAddress parameters must be specified unless the server is configured with a single network adapter only.
-- If the use of a third-party external load balancer is Enabled, then Windows network load balancing (NLB) is automatically Disabled, otherwise NLB is Enabled.
-- When load balancing is enabled the IP-HTTPS prefix and the IPv6 prefix for VPN must be of length 59 bits. The IP-HTTPS prefix can be configured using the ClientIPv6Prefix parameter in the Set-DAServer cmdlet.
-- All servers in the cluster share the same RA configuration.
Note: If Windows load balancing is used then the Network Load Balancing role (NLB) needs to be installed prior to using this cmdlet.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the IPv4 or IPv6 address, or host name, of the server on which the cmdlet runs. If this parameter is specified, then the server is added to the load balanced cluster.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Disable
Disables load balancing.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InternalDedicatedIPAddress<String[]>
Specifies one or more IP addresses with subnet masks that will be used as the dedicated IP addresses (DIPs) for load balancing on the internal network adapter.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InternalVirtualIPAddress<String[]>
Specifies one or more IP addresses with subnet masks that will be used as the virtual IP addresses (VIPs) for load balancing on the internal network adapter. These are usually the current IP addresses on the internal adapter of the server on which the cmdlet is run.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address.
If ISATAP is deployed in the internal network, then at least one of the IP addresses specified in this parameter should be present in the ISATAP name entry in DNS.
The NLS should resolve to at least one of the VIPs.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InternetDedicatedIPAddress<String[]>
Specifies one or more IPv4 or IPv6 addresses with subnet masks that will be used as the DIPs for load balancing on the external network adapter.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InternetVirtualIPAddress<String[]>
Specifies one or more IP addresses with subnet masks that will be used as the VIPs for load balancing on the external network adapter and should include the IPsec tunnel endpoint IP addresses on the external adapter.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address. If ISATAP is deployed in the internal network, then at least one of the IP addresses specified in the parameter should be present in the ISATAP name entry in DNS. If the external adapter VIP addresses are not specified, then by default the IPsec tunnel endpoint IP addresses on the external adapter are used.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThirdPartyLoadBalancer<String>
Specifie the enabled state of a third-party external load balancer. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Enabled.
-- Disabled.
Note: If external load balancing is Enabled and Teredo has been deployed, then all the external DIPs must be consecutive addresses.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UseThirdPartyLoadBalancer
Enables use of a third-party external load balancer for cluster traffic.
Note: If external load balancing is enabled and Teredo has been deployed, then all the external DIPs must be consecutive addresses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#RemoteAccessLoadBalancer
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
The RemoteAccessLoadBalancer object consists of the following properties:
The list of nodes in the cluster and the following properties for each node:
-- IPv4 or IPv6 address or host name of the node.
-- The load balancing status of each node.
-- IPv4 address ranges configured on each node for the VPN static pool address assignment.
-- Status of third party load balancer: Enabled or Disabled.
-- The list of internet virtual IP addresses.
-- The list of internal virtual IP addresses.
예제
EXAMPLE 1
This example sets the NLB settings with Windows load balancer in edge topology. Therefore the Internet address of the existing DA server located at 131.107.0.2 is promoted to be the internet virtual IP address of the load balanced cluster. In this way, clients can still connect to the same external IP that they connected to without bothering about load balancing.
PS C:\> Set-RemoteAccessLoadBalancer -InternetDedicatedIPAddress "131.107.0.20/255.255.255.0" -InternalDedicatedIPAddress @("3ffe::2/64","10.0.0.2/255.255.255.0") -InternetVirtualIPAddress @("131.107.0.5/255.255.255.0","131.107.0.15/255.255.255.0") -InternalVirtualIPAddress @("3ffe::5/64","10.0.0.5/255.255.255.0") -PassThru
EXAMPLE 2
This example sets the NLB settings with Windows load balancer in single network adapter topology. The corporate network is IPv4 and IPv6 enabled and therefore an array containing the IPv4 and IPv6 addresses for internet VIP and DIP is specified. Since the DA server is behind an edge device, the internet VIPs and DIPs contain corporate network addresses.
PS C:\> Set-RemoteAccessLoadBalancer –InternetDedicatedIPAddress @("10.0.0.2/255.255.255.0","3ffe::2/64") –InternetVirtualIPAddress @("10.0.0.5/255.255.255.0", "3ffe::5/64") –PassThru
EXAMPLE 3
This example sets the NLB settings using third party load balancer. The administrator will still have to manually configure the NLB device.
PS C:\> Set-RemoteAccessLoadBalancer -InternetDedicatedIPAddress "131.107.0.20/255.255.255.0" -InternalDedicatedIPAddress @("3ffe::2/64","10.0.0.2/255.255.255.0") -InternetVirtualIPAddress @("131.107.0.5/255.255.255.0","131.107.0.15/255.255.255.0") -InternalVirtualIPAddress @("3ffe::5/64","10.0.0.5/255.255.255.0") -PassThru -UseThirdPartyLoadBalancer
EXAMPLE 4
This example disables the external load balancer for a Windows load balanced cluster. The computer will now use the Windows load balancer to balance the load between servers.
PS C:\> Set-RemoteAccessLoadBalancer -ThirdPartyLoadBalancer Disabled –PassThru
EXAMPLE 5
This example enables the external load balancer for a Windows load balanced cluster. The computer will now use the external load balancer to balance the load between servers.
PS C:\> Set-RemoteAccessLoadBalancer –ThirdPartyLoadBalancer Enabled -PassThru
EXAMPLE 6
This example removes the NLB configuration. DA configuration is also removed from all the servers except the one on which the cmdlet is run.
PS C:\> Set-RemoteAccessLoadBalancer –Disable
관련 항목
Add-RemoteAccessLoadBalancerNode