New-GPLink

New-GPLink

Links a GPO to a site, domain, or organizational unit (OU).

구문

Parameter Set: LinkbyGUID
New-GPLink -Guid <Guid> -Target <String> [-Domain <String> ] [-Enforced <EnforceLink> ] [-LinkEnabled <EnableLink> ] [-Order <Int32> ] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: LinkbyName
New-GPLink [-Name] <String> -Target <String> [-Domain <String> ] [-Enforced <EnforceLink> ] [-LinkEnabled <EnableLink> ] [-Order <Int32> ] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The New-GPLink cmdlet links a GPO to a site, domain, or OU. By default, the link is enabled, which means that the settings of the GPO are applied at the level of the target Active Directory container (site, domain, or OU) according to the rules of inheritance and precedence when Group Policy is processed.

You can specify the GPO by either its display name or its GUID; or the GPO can be piped into the cmdlet. You specify the site, domain, or OU to link to by its LDAP distinguished name. You can use other parameters to specify whether the link is enabled, whether the link is enforced, and the order in which it is applied at the site, domain, or OU.

매개 변수

-Domain<String>

Specifies the domain for this cmdlet. You must specify the fully qualified domain name (FQDN) of the domain (for example: sales.contoso.com).

For the New-GPLink cmdlet:

-- The GPO to link from must exist in this domain.

-- The Active Directory container to link to must exist in a domain that has a trust relationship with this domain.

Note: To specify a domain to link to, use the Target parameter.

If you do not specify the Domain parameter, the domain of the user that is running the current session is used. (If the cmdlet is being run from a computer startup or shutdown script, the domain of the computer is used.) For more information, see the Notes section in the full Help.

If you specify a domain that is different from the domain of the user that is running the current session (or, for a startup or shutdown script, the computer), a trust must exist between that domain and the domain of the user (or the computer).

You can also refer to Domain by its built-in alias, "domainname". For more information, see about_Aliases.

-Enforced<EnforceLink>

Specifies whether the GPO link is enforced. You can specify Yes or No. By default, GPO links are not enforced.

By setting the GPO link to enforced, you ensure the following:

-- That the settings of the GPO cannot be blocked (by blocking inheritance) at a lower-level Active Directory container.

-- That the settings of the GPO always take precedence over conflicting settings in GPOs that are linked to lower-level containers.

This option should be used sparingly. Casual use of this option complicates troubleshooting.

The following values are permitted for this object type.

-Guid<Guid>

Specifies the GPO to link by its globally unique identifier (GUID). The GUID uniquely identifies the GPO in the domain.

You can also refer to the Guid parameter by its built-in alias, "id". For more information, see about_Aliases.

-LinkEnabled<EnableLink>

Specifies whether the GPO link is enabled. You can specify Yes or No.

By default, Group Policy processing is enabled for all GPO links. You can completely block the application of a GPO for a specific site, domain, or OU by disabling the GPO link for that site, domain, or OU. Disabling a GPO link does not disable the GPO itself. If the GPO is linked to other sites, domains, or OUs, Group Policy continues to process the GPO for each link that is enabled.

The following values are permitted for this object type.

-Name<String>

Specifies the GPO to link by its display name.

The display name is not guaranteed to be unique in the domain. If another GPO with the same display name exists in the domain, an error occurs. You can use the Guid parameter to uniquely identify a GPO.

You can also refer to the Name parameter by its built-in alias, "displayname". For more information, see about_Aliases.

-Order<Int32>

Specifies the link order for the GPO link. You can specify a number that is between one and the current number of GPO links to the target site, domain, or OU, plus one.

The link order specifies the order of precedence with which GPOs linked to the same Active Directory container are applied. When Group Policy is processed, GPOs with a higher link order number are processed before GPOs with a lower link order number. Therefore, when two GPOs contain conflicting settings, the settings in the GPO with the lower link order number, because it is processed last, overwrites those of the GPO with the higher link order number. A lower number indicates higher precedence.

By default, the GPO link is added at the lowest precedence (with a link order equal to the number of GPO links to the container, plus one). Link order is a dynamic value because the value may change as GPO links are added and deleted from the container. You can change the link order of a GPO link with the Set-GPLink cmdlet.

-Server<String>

Specifies the name of the domain controller that this cmdlet contacts to complete the operation. You can specify either the fully qualified domain name (FQDN) or the host name. For example:

FQDN: DomainController1.sales.contoso.com

Host Name: DomainController1

If you do not specify the name by using the Server parameter, the PDC emulator is contacted.

You can also refer to the Server parameter by its built-in alias, "dc". For more information, see about_Aliases.

-Target<String>

Specifies the LDAP distinguished name of the site, domain, or OU to which to link the GPO. For example, for the "MyOU" organizational unit in the contoso.com domain, the LDAP distinguished name is "ou=MyOU,dc=contoso,dc=com".

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• Microsoft.GroupPolicy.Gpo

  A GPO to be linked to an Active Directory container. Collections that contain GPOs from different domains are not supported.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.GroupPolicy.GpoLink

  New-GPLink returns an object that represents the link between the GPO and the site, domain, or OU.

참고

• To link a GPO to a site, domain, or OU, you must have Link GPOs permission on that site, domain, or OU. By default, only domain administrators and enterprise administrators have this privilege for domains and OUs. Enterprise administrators and domain administrators of the forest root domain have this privilege for sites.

  You can use the Domain parameter to explicitly specify the domain for this cmdlet.

  If you do not explicitly specify the domain, the cmdlet uses a default domain. The default domain is the domain that is used to access network resources by the security context under which the current session is running. This domain is typically the domain of the user that is running the session. For example, the domain of the user who started the session by opening Windows PowerShell from the Program Files menu, or the domain of a user that is specified in a runas command. However, computer startup and shutdown scripts run under the context of the LocalSystem account. The LocalSystem account is a built-in local account, and it accesses network resources under the context of the computer account. Therefore, when this cmdlet is run from a startup or shutdown script, the default domain is the domain to which the computer is joined.

예제

-------------------------- EXAMPLE 1 --------------------------

Description

-----------

This command creates the "MyGPO" GPO in the domain of the user (or, for a startup or shutdown script, the computer) and links it to the "MyOU" organizational unit in the contoso.com domain. If the domain of the user (or the computer) is different than contoso.com, a trust relationship must exist between the two domains.

Because New-GPLink can take a GPO as input, you can insert any command that returns a GPO between New-GPO and New-GPLink to configure the GPO. For example, you can insert Set-GPPermissions commands to set permissions on the GPO, Set-GPRegistryValue commands to configure one or more registry-based policy settings for the GPO, or Set-GPPrefRegistryValue commands to configure one or more Registry preference items for the GPO.

PS C:\> New-GPO -Name "MyGPO" | New-GPLink -target "ou=MyOU,dc=contoso,dc=com" -LinkEnabled Yes 

-------------------------- EXAMPLE 2 --------------------------

Description

-----------

This command links the "TestGPO" GPO in the domain of the user (or, for a startup or shutdown script, the computer) to the contoso.com domain. If the domain of the user (or the computer) is different than contoso.com, a trust relationship must exist between the two domains.

PS C:\> new-gplink -name testgpo -target "dc=contoso,dc=com" 

-------------------------- EXAMPLE 3 --------------------------

Description

-----------

This command links the "TestGPO" GPO to the "test-site" site and sets the link to enforced.

PS C:\> new-gplink -name testgpo -target "test-site" -enforced yes 

관련 항목

Remove-GPLink

Set-GPLink