Set-NetAdapterRss
Set-NetAdapterRss
Sets the receive side scaling (RSS) properties on the network adapter.
구문
Parameter Set: ByName
Set-NetAdapterRss [-Name] <String[]> [-AsJob] [-BaseProcessorGroup <UInt16> ] [-BaseProcessorNumber <Byte> ] [-CimSession <CimSession[]> ] [-Enabled <Boolean> ] [-IncludeHidden] [-MaxProcessorGroup <UInt16> ] [-MaxProcessorNumber <Byte> ] [-MaxProcessors <UInt32> ] [-NoRestart] [-NumaNode <UInt16> ] [-NumberOfReceiveQueues <UInt32> ] [-PassThru] [-Profile <Profile> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByInstanceID
Set-NetAdapterRss -InterfaceDescription <String[]> [-AsJob] [-BaseProcessorGroup <UInt16> ] [-BaseProcessorNumber <Byte> ] [-CimSession <CimSession[]> ] [-Enabled <Boolean> ] [-IncludeHidden] [-MaxProcessorGroup <UInt16> ] [-MaxProcessorNumber <Byte> ] [-MaxProcessors <UInt32> ] [-NoRestart] [-NumaNode <UInt16> ] [-NumberOfReceiveQueues <UInt32> ] [-PassThru] [-Profile <Profile> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-NetAdapterRss -InputObject <CimInstance[]> [-AsJob] [-BaseProcessorGroup <UInt16> ] [-BaseProcessorNumber <Byte> ] [-CimSession <CimSession[]> ] [-Enabled <Boolean> ] [-MaxProcessorGroup <UInt16> ] [-MaxProcessorNumber <Byte> ] [-MaxProcessors <UInt32> ] [-NoRestart] [-NumaNode <UInt16> ] [-NumberOfReceiveQueues <UInt32> ] [-PassThru] [-Profile <Profile> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on the network adapter. RSS is a scalability technology that distributes the receive network traffic among multiple processors by hashing the header of the incoming packet. Without RSS in , , and Windows Server® 2012; network traffic is received on the first processor which can quickly reach full utilization limiting receive network throughput. Many properties can be configured using the parameters to optimize the performance of RSS. The selection of the processors to use for RSS is an important aspect of load balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS. A thorough understanding of RSS is recommended before modifying individual parameters. Selecting the correct profile should be sufficient in most scenarios.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-BaseProcessorGroup<UInt16>
Sets the base processor group of a non-uniform memory access (NUMA) node. This will impact the processor array used by RSS. This parameter is the lowest group number of any processors that appear in the processor array.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-BaseProcessorNumber<Byte>
Sets the base processor number of a NUMA node. This parameter is the lowest processor number of any processors from the BaseProcessorGroup parameter that appear in the processor array. This allows for partitioning processors across network adapters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Enabled<Boolean>
Sets the enabled state of RSS on an interface
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<CimInstance[]>
이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByValue) |
와일드카드 문자 허용 여부 |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
별칭 |
ifDesc |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-MaxProcessorGroup<UInt16>
Sets the maximum processor group of a NUMA node. This parameter is the highest group number of any processors that appear in the processor array for this network adapter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MaxProcessorNumber<Byte>
Sets the maximum processor number of a NUMA node. This parameter is the highest processor number of any processors from the MaxProcessorGroup parameter that appear in the processor array for this network adapter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MaxProcessors<UInt32>
Sets the maximum number of processors to be used concurrently by RSS from the processor array for load balancing network transmissions from a single network adapter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String[]>
Specifies the name of the network adapter.
별칭 |
ifAlias, InterfaceAlias |
필수 여부 |
true |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-NoRestart
Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NumaNode<UInt16>
Sets the NUMA node affinity for a network adapter. This will ensure that a given network transmission is load balanced by RSS within the NUMA node. This affects the memory allocation and also impacts the preference and ordering of the processors in the processor array. It does not affect the set of processors contained in the array, but it may impact the subset of the array that RSS actually uses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NumberOfReceiveQueues<UInt32>
Specifies the number of receive queues per network adapter that is to be used by the interface
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Profile<Profile>
Specifies the RSS profile. 이 매개 변수에 허용되는 값은 다음과 같습니다. Closest, ClosestStatic, NUMA, NUMAStatic, or Conservative.
- Closest: Behavior is consistent with the behavior of .
- ClosestStatic: No dynamic load balancing, such as distributing but not load balancing at runtime.
- NUMA: Assigns RSS processors in a round robin basis across every NUMA node to enable applications that are running on NUMA servers to scale well.
- NUMAStatic: Default behavior. RSS processor selection is the same as for NUMA scalability without dynamic load balancing.
- Conservative: RSS uses as few processors as possible to sustain the load. This option helps reduce the number of interrupts.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterRssSettingData[]
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterRssSettingData
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example sets an RSS profile for a non-uniform memory access (NUMA) server without dynamic load balancing.
PS C:\> Set-NetAdapterRss –Name "Ethernet" -Profile NUMAStatic