Get-NetAdapterChecksumOffload
Get-NetAdapterChecksumOffload
Gets the various checksum offload settings from network adapters that support these checksum offloads.
구문
Parameter Set: ByName
Get-NetAdapterChecksumOffload [[-Name] <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceID
Get-NetAdapterChecksumOffload -InterfaceDescription <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-NetAdapterChecksumOffload cmdlet gets the various checksum offload settings. Physical network adapters have various checksum offloads in which the checksum calculations occur in the network adapter and not in the main processor. This reduces processor utilization and can increase network throughput. This cmdlet gets the various checksum offload settings, including IPv4, TCPv4, TCPv6, UDPv4, and UDPv6.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the vendors name of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
별칭 |
ifDesc |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-Name<String[]>
Specifies the name of the network adapter.
별칭 |
ifAlias, InterfaceAlias |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter ChecksumOffloadSettingData
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example gets the state of checksum offload properties of the network adapter named MyAdapter.
PS C:\> Get-NetAdapterChecksumOffload –Name MyAdapter
EXAMPLE 2
This example displays the checksum offload hardware capabilities of the network adapter named MyAdapter.
PS C:\> $networkAdapterCO1 = Get-NetAdapterChecksumOffload –Name MyAdapter
PS C:\> $networkAdapterCO1.ChecksumOffloadHardwareCapabilities
관련 항목
Disable-NetAdapterChecksumOffload