Get-NetAdapterAdvancedProperty
Get-NetAdapterAdvancedProperty
Returns the advanced properties for the network adapter.
구문
Parameter Set: ByName
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceID
Get-NetAdapterAdvancedProperty -InterfaceDescription <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceIDDisplayName
Get-NetAdapterAdvancedProperty -DisplayName <String[]> -InterfaceDescription <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceIDKeyword
Get-NetAdapterAdvancedProperty -InterfaceDescription <String[]> -RegistryKeyword <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByNameDisplayName
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] -DisplayName <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByNameRegistryKeyword
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] -RegistryKeyword <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-NetAdapterAdvancedProperty cmdlet gets the advanced properties for the network adapter. By default this cmdlet returns advanced properties that have display name values, meaning that these advanced properties are visible in the Advanced pane of the Adapter Properties in the Windows UI. Advanced properties that do not have display names require that the AllProperties parameter is specified. Individual advanced properties can also be selected either by DisplayName or RegistryKeyword parameters. Both of these parameters support the use of wildcard characters. The advanced properties are normally found in the following location in the registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\xxxxxxxx
where xxxx
is a four character string representing an integer such as 0007
. The standardized keywords have a RegistryKeyword name that begins with an asterisk (*
). The valid values for these keywords are available by piping the output into the Format-List cmdlet with the ValidDisplayValues or the ValidRegistryValues specified.
매개 변수
-AllProperties
Returns all the advanced properties of the network adapter. If this parameter is not specified, then only advanced properties that have a DisplayName parameter are returned.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DisplayName<String[]>
Specifies the advanced property name shown in the Advanced tab under the network adapter properties in Windows Server® 2012 and later.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
별칭 |
ifDesc |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
true |
-Name<String[]>
Specifies the name of the network adapter.
별칭 |
ifAlias, InterfaceAlias |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-RegistryKeyword<String[]>
Contains the name of the registry value to be read, such as one of the registry values found in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0007.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterAdvancedPropertySettingData
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example gets all of the advanced properties that have a display name from all visible network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name *
EXAMPLE 2
This example gets all of the advanced properties from all visible network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -AllProperties
EXAMPLE 3
This example gets all of the advanced properties from all visible network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -RegistryKeyword *
EXAMPLE 4
This example gets all of the advanced properties from all network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -AllProperties -IncludeHidden
EXAMPLE 5
This example gets all of the advanced properties from all network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -RegistryKeyword * -IncludeHidden
EXAMPLE 6
This example gets all of the unformatted, advanced properties from the network adapter named MyAdapter.
PS C:\> Get-NetAdapterAdvancedProperty -Name MyAdapter | Format-List -Property *
EXAMPLE 7
This example gets the advanced properties for network adapters that have a display name that starts with TCP.
PS C:\> Get-NetAdapterAdvancedProperty -Name * | Where-Object –FilterScript { $_.DisplayName -Like "TCP*" }
EXAMPLE 8
This example gets the advanced properties for network adapters that have a display name that starts with Inter.
PS C:\> Get-NetAdapterAdvancedProperty -Name * | Where-Object -FilterScript { $_.DisplayName -Like "Inter*" }
관련 항목
New-NetAdapterAdvancedProperty
Remove-NetAdapterAdvancedProperty
Reset-NetAdapterAdvancedProperty