Get-NetAdapterSriov

  • 아티클

Get-NetAdapterSriov

Gets the Single-Root I/O Virtualization (SR-IOV) properties of the network adapter.

구문

Parameter Set: ByName
Get-NetAdapterSriov [[-Name] <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByInstanceID
Get-NetAdapterSriov -InterfaceDescription <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

자세한 설명

The Get-NetAdapterSriov cmdlet gets the Single-Root I/O Virtualization (SR-IOV) properties of network adapters that support SR-IOV. SR-IOV enables network traffic to by-pass the software switch layer of the Hyper-V virtualization stack. As a result, the I/O overhead in the software emulation layer is diminished and can achieve network performance that is nearly the same performance as in non-virtualized environments. Run this cmdlet to display how the hardware is set to support SR-IOV. This cmdlet will display the properties of the network adapter that relate to SR-IOV, such as the number of ports, and virtual functions (VFs). The property SriovSupport indicates potential reasons for SR-IOV not functioning properly. The possible values for SriovSupport include the following.
- Unknown: Ensure that the computer has hardware support for SR-IOV and that I/O virtualization is enabled in the BIOS. Also ensure that the computer is running Windows Server® 2012 and later.
- Supported: SR-IOV is supported and should be functioning properly.
- MissingAcs: SR-IOV cannot be used on this network adapter as the PCI Express hardware does not support Access Control Services (ACS). This device may work in an alternate PCI Express slot. Contact your hardware vendor for further information.
- MissingPfDriver: SR-IOV cannot be used on this network adapter as the device or device driver does not support SR-IOV. If the network adapter supports SR-IOV, contact the hardware vendor for an updated driver.
- NoBusResources: SR-IOV cannot be used on this network adapter as there are not enough PCI Express bus numbers available.
- NoIoMmuSupport: SR-IOV cannot be used on this computer because of one or more of the following reasons.
- - The processor does not support second level address translation (SLAT). For processors manufactured by Intel Corporation™ (Intel™), this feature might be referred to as Extended Page Tables (EPT). For processors manufactured by Advanced Micro Devices™ (AMD™), this feature might be referred to as Rapid Virtualization Indexing (RVI) or Nested Page Tables (NPT).
- - The chipset on the computer does not do Interrupt and/or DMA remapping, without which SR-IOV cannot be supported.
- - This computer has been configured to disable the use of I/O remapping hardware.
- NoVfBarSpace: SR-IOV cannot be used on this network adapter as there are not enough PCI Express BAR resources available. This may be due to incorrect or partial configuration in the computer BIOS for Interrupt and DMA remapping. These settings may be referred to as SR-IOV or input/output memory management unit (IOMMU) support. If the computer BIOS is correctly configured, this device may work in an alternate PCI Express slot. Contact the original equipment manufacturer of the computer for further information.
- NoOscSupport: To use SR-IOV on this computer, the computer BIOS must be updated to allow Windows Server 2012 and later to control PCI Express using _OSC HandOff. Contact the original equipment manufacturer of the computer for an update.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-IncludeHidden

Specifies both visible and hidden network adapters. If a wildcard character is used to identify a network adapter, then the wildcard character is matched against both hidden and visible adapters.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-InterfaceDescription<String[]>

Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

별칭

ifDesc

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

true (ByPropertyName)

와일드카드 문자 허용 여부

true

-Name<String[]>

Specifies the name of the network adapter. The name of the network adapter from which to retrieve the SR-IOV properties.

별칭

ifAlias, InterfaceAlias

필수 여부

false

위치

1

기본값

없음

파이프라인 입력 적용 여부

true (ByPropertyName)

와일드카드 문자 허용 여부

true

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

  • None

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterSriovSettingData

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

EXAMPLE 1

This example displays the SR-IOV properties for all SR-IOV-capable network adapters.

PS C:\> Get-NetAdapterSriov –Name *

EXAMPLE 2

This example displays the SR-IOV properties for network adapter named Ethernet 2.

PS C:\> Get-NetAdapterSriov -Name "Ethernet 2"

EXAMPLE 3

This example displays the SR-IOV properties for the network adapter with the interface description Contoso 12345 Gigabit Network Device.

PS C:\> Get-NetAdpaterSriov -InterfaceDescription "Contoso 12345 Gigabit Network Device"

EXAMPLE 4

This example gets the SR-IOV properties for the network adapter with SR-IOV enabled.

PS C:\> Get-NetAdapterSriov –Name * | Where-Object -FilterScript { $_.Enabled –Eq $true }

관련 항목

Disable-NetAdapterSriov

Enable-NetAdapterSriov

Get-NetAdapterSriovVf

Set-NetAdapterSriov

Where-Object