Get-NetAdapterBinding
Get-NetAdapterBinding
Returns a list of bindings for a network adapter.
구문
Parameter Set: ByName
Get-NetAdapterBinding [[-Name] <String[]> ] [-AllBindings] [-AsJob] [-CimSession <CimSession[]> ] [-ComponentID <String[]> ] [-DisplayName <String[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceID
Get-NetAdapterBinding -InterfaceDescription <String[]> [-AllBindings] [-AsJob] [-CimSession <CimSession[]> ] [-ComponentID <String[]> ] [-DisplayName <String[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Get-NetAdapterBinding cmdlet returns a list of bindings for a network adapter. By default only the visible bindings shown in the Networking tab under the Network Adapter properties in Windows UI is returned. To get all properties for a network adapter, use the AllProperties parameter.
매개 변수
-AllBindings
Returns all the bindings for the network adapter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComponentID<String[]>
Specifies the underlying name of the transport or filter in the following form.
- ms_xxxx
, such as ms_tcpip
.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
true |
-DisplayName<String[]>
Specifies the transport or filter name shown in the Networking tab under the network adapter properties in Windows Server® 2012 and later.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
true |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
별칭 |
ifDesc |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-Name<String[]>
Specifies the name of the network adapter.
별칭 |
ifAlias |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
true (ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter BindingSettingData
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
예제
EXAMPLE 1
This example gets the bindings for the network adapter named MyAdapter.
PS C:\> Get-NetAdapterBinding -Name MyAdapter
EXAMPLE 2
This example gets all of the bindings for the network adapter named MyAdapter (unformatted).
PS C:\> Get-NetAdapterBinding -Name MyAdapter -AllBindings
EXAMPLE 3
This example gets the state of the TCP/IPv4 on the network adapter named MyAdapter using display name.
PS C:\> Get-NetAdapterBinding -Name MyAdapter -DisplayName "Internet Protocol Version 4 (TCP/IPv4)"
EXAMPLE 4
This example gets the state of the TCP/IPv4 transport on MyAdapter using component ID.
PS C:\> Get-NetAdapterBinding -Name MyAdapter -ComponentID ms_tcpip
EXAMPLE 5
This example gets the state of TCP/IPv4 and TCP/IPv6 on all visible adapters using wildcard characters.
PS C:\> Get-NetAdapterBinding –Name * -DisplayName "Internet*"