Enable-DAOtpAuthentication

Enable-DAOtpAuthentication

Enables and configures one-time password (OTP) authentication for DirectAccess (DA) users.

구문

Parameter Set: Enable1
Enable-DAOtpAuthentication [-AsJob] [-CAServer <String[]> ] [-CertificateTemplateName <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-PassThru] [-RadiusPort <UInt16> ] [-RadiusServer <String> ] [-SharedSecret <String> ] [-SigningCertificateTemplateName <String> ] [-ThrottleLimit <Int32> ] [-UserSecurityGroupName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Enable-DAOtpAuthentication cmdlet enables one-time password (OTP) authentication for DirectAccess (DA) users, and configures OTP settings.

매개 변수

-AsJob

-CAServer<String[]>

Specifies the certification authority (CA) servers that issue certificates for OTP authentication. Specify a server in the following format:
-- CAServer_Name\CAService_Name.

-CertificateTemplateName<String>

Specifies the name of the certificate template used for OTP certificate enrollment.

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the server on which the cmdlet should run.

-Force

사용자 확인을 요구하지 않고 명령을 실행합니다.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-RadiusPort<UInt16>

Specifies the RADIUS server port listening for authentication requests.

-RadiusServer<String>

Specifies the IPv4 or IPv6 address, or the fully qualified domain name (FQDN), of the RADIUS server used for OTP authentication.

-SharedSecret<String>

Specifies the shared password used for communications between the Remote Access server and the RADIUS server.

-SigningCertificateTemplateName<String>

Specifies the name of the certificate template used to enroll the certificate used by Remote Access to sign certificates used for OTP authentication.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-UserSecurityGroupName<String>

Specifies the security group containing users who are exempt from two-factor authentication.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• None

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#DAOtpAuth

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
  The object contains the following OTP authentication configuration settings:
  -- OtpStatus specifies whether OTP authentication is enabled or disabled.
  -- RadiusServer specifies OTP RADIUS server names and addresses.
  -- UserSecurityGroupName specifies security group of users exempt from two-factor authentication.
  -- CAServer specifies the CA servers used for OTP authentication.
  -- CertificateTemplateName specifies the name of the OTP certificate template.
  -- SigningCertificateTemplateName specifies the name of the certificate template used to enroll the certificate used by Remote Access to sign certificates used for OTP authentication.

예제

Example 1

This example enables OTP authentication for DA users while setting the following.
-- rsa.corp.contoso.com as RADIUS or OTP server used to verify users OTP credentials.
-- dc1.corp.contoso.com\corp-DC1-CA as CA server used to enroll smart card logon short lived certificates.
-- DAOTPLogon as enroll smart card logon short lived certificates template.
All of the above settings should be set up in advance before the DA administrator can configure OTP for DA. UserSecurityGroupName is an optional setting and thus was not set which means that the two-factor authentication exemption feature is Disabled.
This cmdlet can add one new OTP Radius server each time it runs, for additional handling of Radius servers for OTP please use RemoteAccessRadius cmdlets.
Note: This cmdlet will enable OTP if two-factor user authentication and computer certificates were already enabled using the Set-DAServer cmdlet. If PKI and two-factor user authentication are disabled, then this cmdlet fails. In addition enabling OTP authentication does not disable smart card or any other two-factor authentication available to the DA user.

PS C:\> Enable-DAOtpAuthentication –RadiusServer rsa.corp.contoso.com –SharedSecret abcd123$ -CAServers dc1.corp.contoso.com\corp-DC1-CA –CertificateTemplateName DAOTPLogon –PassThru -Force

If the Force parameter is not used, then the DA administrator is presented with the following prompt.

PS C:\> Enable-DAOtpAuthentication –RadiusServer rsa.corp.contoso.com –SharedSecret abcd123$ -CAServers dc1.corp.contoso.com\corp-DC1-CA –CertificateTemplateName DAOTPLogon –PassThru

Example 2

This example enables OTP authentication for DA users while keeping the OTP settings for RadiusServer and CAServers that were set before OTP authentication was disabled. The CertificateTemplateName setting was updated to the new value.
The new smart card logon short lived certificates template should be created before running this cmdlet.

PS C:\> Enable-DAOtpAuthentication -CertificateTemplateName DAOTPLogon_v2 –PassThru -Force

관련 항목

Add-RemoteAccessRadius

Get-RemoteAccessRadius

Remove-RemoteAccessRadius

Set-DAServer

Set-RemoteAccessRadius