Enable-DAOtpAuthentication
Enable-DAOtpAuthentication
Enables and configures one-time password (OTP) authentication for DirectAccess (DA) users.
구문
Parameter Set: Enable1
Enable-DAOtpAuthentication [-CAServer <String[]> ] [-CertificateTemplateName <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-RadiusPort <UInt16> ] [-RadiusServer <String> ] [-SharedSecret <String> ] [-SigningCertificateTemplateName <String> ] [-ThrottleLimit <Int32> ] [-UserSecurityGroupName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Enable-DAOtpAuthentication cmdlet enables one-time password (OTP) authentication for DirectAccess (DA) users, and configures OTP settings.
매개 변수
-CAServer<String[]>
Specifies the certification authority (CA) servers that issue certificates for OTP authentication. Specify a server in the following format:
-- CAServer_Name\CAService_Name
.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CertificateTemplateName<String>
Specifies the name of the certificate template used for OTP certificate enrollment.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the IPv4 or IPv6 address, or host name, of the server on which the cmdlet should run.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자에게 확인 메시지를 표시하지 않고 명령을 강제 실행합니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RadiusPort<UInt16>
Specifies the RADIUS server port listening for authentication requests.
별칭 |
Port |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-RadiusServer<String>
Specifies the IPv4 or IPv6 address, or the fully qualified domain name (FQDN), of the RADIUS server used for OTP authentication.
별칭 |
Server |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SharedSecret<String>
Specifies the shared password used for communications between the Remote Access server and the RADIUS server.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SigningCertificateTemplateName<String>
Specifies the name of the certificate template used to enroll the certificate used by Remote Access to sign certificates used for OTP authentication.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UserSecurityGroupName<String>
Specifies the security group containing users who are exempt from two-factor authentication.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
- None
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
Microsoft.Management.Infrastructure.CimInstance#DAOtpAuth
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤의 경로는 기본 WMI 개체에 대한 네임 스페이스 및 클래스 이름을 제공합니다.
The object contains the following OTP authentication configuration settings:
-- OtpStatus specifies whether OTP authentication is enabled or disabled.
-- RadiusServer specifies OTP RADIUS server names and addresses.
-- UserSecurityGroupName specifies security group of users exempt from two-factor authentication.
-- CAServer specifies the CA servers used for OTP authentication.
-- CertificateTemplateName specifies the name of the OTP certificate template.
-- SigningCertificateTemplateName specifies the name of the certificate template used to enroll the certificate used by Remote Access to sign certificates used for OTP authentication.
예
Example 1
This example enables OTP authentication for DA users while setting the following.
-- rsa.corp.contoso.com as RADIUS or OTP server used to verify users OTP credentials.
-- dc1.corp.contoso.com\corp-DC1-CA as CA server used to enroll smart card logon short lived certificates.
-- DAOTPLogon as enroll smart card logon short lived certificates template.
All of the above settings should be set up in advance before the DA administrator can configure OTP for DA. UserSecurityGroupName is an optional setting and thus was not set which means that the two-factor authentication exemption feature is Disabled.
This cmdlet can add one new OTP Radius server each time it runs, for additional handling of Radius servers for OTP please use RemoteAccessRadius cmdlets.
Note: This cmdlet will enable OTP if two-factor user authentication and computer certificates were already enabled using the Set-DAServer cmdlet. If PKI and two-factor user authentication are disabled, then this cmdlet fails. In addition enabling OTP authentication does not disable smart card or any other two-factor authentication available to the DA user.
PS C:\> Enable-DAOtpAuthentication –RadiusServer rsa.corp.contoso.com –SharedSecret abcd123$ -CAServers dc1.corp.contoso.com\corp-DC1-CA –CertificateTemplateName DAOTPLogon –PassThru -Force
If the Force parameter is not used, then the DA administrator is presented with the following prompt.
PS C:\> Enable-DAOtpAuthentication –RadiusServer rsa.corp.contoso.com –SharedSecret abcd123$ -CAServers dc1.corp.contoso.com\corp-DC1-CA –CertificateTemplateName DAOTPLogon –PassThru
Example 2
This example enables OTP authentication for DA users while keeping the OTP settings for RadiusServer and CAServers that were set before OTP authentication was disabled. The CertificateTemplateName setting was updated to the new value.
The new smart card logon short lived certificates template should be created before running this cmdlet.
PS C:\> Enable-DAOtpAuthentication -CertificateTemplateName DAOTPLogon_v2 –PassThru -Force