Get-NetFirewallRule

Windows Server 2012 R2 and Windows 8.1

Get-NetFirewallRule

Retrieves firewall rules from the target computer.

구문

Parameter Set: ByAssociatedNetFirewallAddressFilter
Get-NetFirewallRule -AssociatedNetFirewallAddressFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallApplicationFilter
Get-NetFirewallRule -AssociatedNetFirewallApplicationFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallInterfaceFilter
Get-NetFirewallRule -AssociatedNetFirewallInterfaceFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallInterfaceTypeFilter
Get-NetFirewallRule -AssociatedNetFirewallInterfaceTypeFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallPortFilter
Get-NetFirewallRule -AssociatedNetFirewallPortFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallProfile
Get-NetFirewallRule -AssociatedNetFirewallProfile <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallSecurityFilter
Get-NetFirewallRule -AssociatedNetFirewallSecurityFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallServiceFilter
Get-NetFirewallRule -AssociatedNetFirewallServiceFilter <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByDisplayName
Get-NetFirewallRule -DisplayName <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByName
Get-NetFirewallRule [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: ByQuery
Get-NetFirewallRule [-Action <Action[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-Description <String[]> ] [-Direction <Direction[]> ] [-DisplayGroup <String[]> ] [-EdgeTraversalPolicy <EdgeTraversal[]> ] [-Enabled <Enabled[]> ] [-GPOSession <String> ] [-Group <String[]> ] [-LocalOnlyMapping <Boolean[]> ] [-LooseSourceMapping <Boolean[]> ] [-Owner <String[]> ] [-PolicyStore <String> ] [-PolicyStoreSource <String[]> ] [-PolicyStoreSourceType <PolicyStoreType[]> ] [-PrimaryStatus <PrimaryStatus[]> ] [-Status <String[]> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]

Parameter Set: GetAll
Get-NetFirewallRule [-All] [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [ <CommonParameters>]




자세한 설명

The Get-NetFirewallRule cmdlet returns the instances of firewall rules that match the search parameters from the user. See the New-NetFirewallRule cmdlet for more information.

This cmdlet returns one or more firewall rules by specifying the Name parameter (default), the DisplayName parameter, rule properties, or by associated filters or objects. The queried rules can be placed into variables and piped to other cmdlets for further modifications or monitoring.

When running the cmdlet with the Get verb for any firewall, IPsec, or main mode rule, notice that the common conditions like addresses or ports do not appear. These conditions are represented in separate objects called filters. The filter-to-rule relationship is always one-to-one and is managed automatically. If a query for rules based on these parameters (ports, addresses, security, interfaces, and services) is performed, then the filter objects with the corresponding cmdlet with the Get verb should to be retrieved. See the Get-NetFirewallAddressFilter, Get-NetFirewallApplicationFilter, Get-NetFirewallInterfaceFilter, Get-NetFirewallInterfaceTypeFilter, Get-NetFirewallPortFilter, Get-NetFirewallProfile, Get-NetFirewallSecurityFilter, Get-NetFirewallServiceFilter, or Get-NetFirewallRule cmdlet for more information.

매개 변수

-Action<Action[]>

Specifies that matching firewall rules of the indicated action are retrieved.
This parameter specifies the action to take on traffic that matches this rule.
이 매개 변수에 허용되는 값은 다음과 같습니다. Allow or Block.
-- Allow: Network packets that match all of the criteria specified in this rule are permitted through the firewall. This is the default value.
-- Block: Network packets that match all of the criteria specified in this rule are dropped by the firewall.
The default value is Allow.
Note: The OverrideBlockRules field changes an allow rule into an allow bypass rule.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-All

Indicates that all of the firewall rules within the specified policy store are retrieved.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallAddressFilter<CimInstance>

Gets the firewall rules that are associated with the given address filter to be retrieved.
A NetFirewallAddressFilter object represents the address conditions associated with a rule. See the Get-NetFirewallAddressFilter cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallApplicationFilter<CimInstance>

Gets the firewall rules that are associated with the given application filter to be retrieved.
A NetFirewallApplicationFilter object represents the applications associated with a rule. See the Get-NetFirewallApplicationFilter cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallInterfaceFilter<CimInstance>

Gets the firewall rules that are associated with the given interface filter to be retrieved.
A NetFirewallInterfaceFilter object represents the interface conditions associated with a rule. See the Get-NetFirewallInterfaceFilter cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallInterfaceTypeFilter<CimInstance>

Gets the firewall rules that are associated with the given interface type filter to be retrieved.
A NetFirewallInterfaceTypeFilter object represents the interface conditions associated with a rule. See the Get-NetFirewallInterfaceTypeFilter cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallPortFilter<CimInstance>

Gets the firewall rules that are associated with the given port filter to be retrieved.
A NetFirewallPortFilter object represents the port conditions associated with a rule. See the Get-NetFirewallPortFilter cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallProfile<CimInstance>

Gets the firewall rules that are associated with the given firewall profile type to be retrieved.
A NetFirewallProfile object represents the profile conditions associated with a rule. See the Get-NetFirewallProfile cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallSecurityFilter<CimInstance>

Gets the firewall rules that are associated with the given security filter to be retrieved.
A NetFirewallSecurityFilter object represents the security conditions associated with a rule. See the Get-NetFirewallSecurityFilter cmdlet for more information. The security conditions include the Authentication, Encryption, LocalUser, RemoteUser, and RemoteMachine parameters.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-AssociatedNetFirewallServiceFilter<CimInstance>

Gets the firewall rules that are associated with the given service filter to be retrieved.
A NetFirewallServiceFilter object represents the profile conditions associated with a rule. See the Get-NetFirewallServiceFilter cmdlet for more information.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue)

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.


별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Description<String[]>

Specifies that matching firewall rules of the indicated description are retrieved. Wildcard characters are accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Direction<Direction[]>

Specifies that matching firewall rules of the indicated direction are retrieved.
This parameter specifies which direction of traffic to match with this rule.
이 매개 변수에 허용되는 값은 다음과 같습니다. Inbound or Outbound.
The default value is Inbound.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-DisplayGroup<String[]>

Specifies that only matching firewall rules of the indicated group association are retrieved. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify the Group parameter value with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using dot-notation and the Set-NetFirewallRule cmdlet.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-DisplayName<String[]>

Specifies that only matching firewall rules of the indicated display name are retrieved. Wildcard characters are accepted.
Specifies the localized, user-facing name of the firewall rule being retrieved. When creating a rule this parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value. Note: This parameter cannot be set to All.


별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-EdgeTraversalPolicy<EdgeTraversal[]>

Specifies that matching firewall rules of the indicated edge traversal policy are retrieved.
This parameter specifies how this firewall rule will handle edge traversal cases. Edge traversal allows the computer to accept unsolicited inbound packets that have passed through an edge device, such as a network address translation (NAT) router or firewall. This option applies to inbound rules only.
이 매개 변수에 허용되는 값은 다음과 같습니다. Block, Allow, DeferToUser, or DeferToApp.
-- Block: Prevents applications from receiving unsolicited traffic from the Internet through a NAT edge device.
-- Allow: Allows applications to receive unsolicited traffic directly from the Internet through a NAT edge device.
-- DeferToUser: Allows the user to decide whether to allow unsolicited traffic from the Internet through a NAT edge device when an application requests it.
-- DeferToApp: Allows each application to determine whether to allow unsolicited traffic from the Internet through a NAT edge device.
The default value is Block.
Note: The DeferToApp and DeferToUser options are only valid for computers running , , and Windows Server® 2012.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Enabled<Enabled[]>

Specifies that matching firewall rules of the indicated state are retrieved.
This parameter specifies that the rule object is administratively enabled or administratively disabled. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- True: Specifies the rule is currently enabled.
-- False: Specifies the rule is currently disabled. A disabled rule will not actively modify computer behavior, but the management construct still exists on the computer so it can be re-enabled.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-GPOSession<String>

Specifies the network GPO from which to retrieve the rules to be retrieved.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving the domain GPO back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Group<String[]>

Specifies that only matching firewall rules of the indicated group association are retrieved. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is a good practice to specify this parameter value with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using dot-notation and the Set-NetFirewallRule cmdlet.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-LocalOnlyMapping<Boolean[]>

Indicates that matching firewall rules of the indicated value are retrieved.
This parameter specifies the firewall rules for local only mapping, which describes whether a packet must pass through a local address on the way to the destination.
Non-TCP traffic is session-less. Windows Firewall authorizes traffic per session, not per packet, for performance reasons. Generally, non-TCP sessions are inferred by checking the following fields: local address, remote address, protocol, local port, and remote port.
If this parameter is set to True, then the remote address and port will be ignored when inferring remote sessions. Sessions will be grouped based on local address, protocol, and local port.
This is similar to the LooseSourceMapping parameter, but performs better in cases where the traffic does not need to be filtered by remote address. This could improve performance on heavy server workloads where UDP requests come from dynamic client ports. For instance, Teredo relay servers.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-LooseSourceMapping<Boolean[]>

Indicates that matching firewall rules of the indicated value are retrieved.
This parameter specifies the firewall rules for loose source mapping, which describes whether a packet can have a non-local source address when being forwarded to a destination.
If this parameter is set to True, then the rule accepts packets incoming from a host other than the one to which the packets were sent. This parameter applies only to UDP protocol traffic.
The default value is False.


별칭

LSM

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Name<String[]>

Specifies that only matching firewall rules of the indicated name are retrieved. Wildcard characters are accepted.
This parameter acts just like a filename, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So if an administrator has a different or more specific rule with the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for main mode encryption need to overridden, specify the customized parameters and set this parameter, making it the new default setting for encryption.


별칭

ID

필수 여부

true

위치

1

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Owner<String[]>

Specifies that matching firewall rules of the indicated owner are retrieved.
This parameter specifies the owner of the firewall rule, represented as an SDDL string. All Windows Store applications that require network traffic create network isolation rules (normally through installing via the Store), where the user that installed the application is the owner. This parameter specifies that only network packets that are authenticated as coming from or going to an owner identified in the list of accounts (SID) match this rule.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-PolicyStore<String>

Targets the policy store from which to retrieve the rules to be retrieved.
A policy store is a container for firewall and IPsec policy.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetFirewallRule or with the New-NetFirewallRule cmdlet.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-PolicyStoreSource<String[]>

Specifies that firewall rules matching the indicated policy store source are retrieved.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This parameter value cannot always be passed into the PolicyStore parameter. Domain GPOs are one example in which this parameter contains only the GPO name, not the domain name.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-PolicyStoreSourceType<PolicyStoreType[]>

Specifies that firewall rules that match the indicated policy store source type are retrieved.
This parameter describes the type of policy store where the rule originated if the object is retrieved from the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in the cmdlets, but may appear when monitoring active policy.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-PrimaryStatus<PrimaryStatus[]>

Specifies that firewall rules that match the indicated primary status are retrieved.
This parameter specifies the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-Status<String[]>

Specifies that firewall rules that match the indicated status are retrieved.
This parameter describes the status message for the specified status code value. The status code is a numerical value that indicates any syntax, parsing, or runtime errors in the rule or set. This parameter value should not be modified.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-TracePolicyStore

Specifies that the name of the source GPO is queried and set to the PolicyStoreSource parameter value.


별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(http://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetAddressFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetApplicationFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallProfile

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceTypeFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetNetworkLayerSecurityFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetProtocolPortFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetServiceFilter

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallRule

    Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.


예제

EXAMPLE 1

This example retrieves all of the firewall rules in the active store, which is a collection of all of the policy stores that apply to the computer. Running this cmdlet without specifying the policy store retrieves the persistent store.


PS C:\> Get-NetFirewallRule -PolicyStore ActiveStore

EXAMPLE 2

This example retrieves all of the firewall rules scoped to the public profile.


PS C:\> Get-NetFirewallProfile -Name Public | Get-NetFirewallRule

EXAMPLE 3

This example modifies the service associated with firewall rules in a specified group.


 

PS C:\> $nfServiceFilter = Get-NetFirewallRule –Group "@FirewallAPI.dll,-30502" | Get-NetFirewallServiceFilter -Service Any

 

PS C:\> Set-NetFirewallServiceFilter –Service Ssdpsrv –InputObject $nfServiceFilter

 

This cmdlet can be run using only the pipeline.


PS C:\> Get-NetFirewallRule –Group "@FirewallAPI.dll,-30502" | Get-NetFirewallServiceFilter -Service Any | Set-NetFirewallServiceFilter –Service Ssdpsrv

관련 항목

커뮤니티 추가 항목

추가
표시: