Set-NetIPsecMainModeCryptoSet

Set-NetIPsecMainModeCryptoSet

Modifies existing main mode cryptographic sets.

구문

Parameter Set: ByDisplayGroup
Set-NetIPsecMainModeCryptoSet -DisplayGroup <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-ForceDiffieHellman <Boolean> ] [-GPOSession <String> ] [-MaxMinutes <UInt32> ] [-MaxSessions <UInt32> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByDisplayName
Set-NetIPsecMainModeCryptoSet -DisplayName <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-ForceDiffieHellman <Boolean> ] [-GPOSession <String> ] [-MaxMinutes <UInt32> ] [-MaxSessions <UInt32> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByGroup
Set-NetIPsecMainModeCryptoSet -Group <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-ForceDiffieHellman <Boolean> ] [-GPOSession <String> ] [-MaxMinutes <UInt32> ] [-MaxSessions <UInt32> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByName
Set-NetIPsecMainModeCryptoSet [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-ForceDiffieHellman <Boolean> ] [-GPOSession <String> ] [-MaxMinutes <UInt32> ] [-MaxSessions <UInt32> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-NetIPsecMainModeCryptoSet -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-ForceDiffieHellman <Boolean> ] [-MaxMinutes <UInt32> ] [-MaxSessions <UInt32> ] [-NewDisplayName <String> ] [-PassThru] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-NetIPsecMainModeCryptoSet cmdlet modifies cryptographic properties for existing main mode cryptographic sets.

This cmdlet gets one or more main mode cryptographic sets to be modified with the Name (default), DisplayName, or by group association using the Group or DisplayGroup parameter. The sets cannot be queried by property in this cmdlet. The querying can be done by running the Get-NetIPsecMainModeCryptoSet cmdlet, The Get-NetIPsecMainModeCryptoSet cmdlet returns the cryptographic sets and pipes the sets into this cmdlet, which modifies the sets. The remaining parameters specify the properties of the set to be modified. When a group is specified, all of the sets associated with the group receive the same modifications. Rule fields are modified using the dot notation are committed with this cmdlet.

To move a set to a new GPO, copy the existing set by running the Copy-NetIPsecMainModeCryptoSet cmdlet with the NewPolicyStore parameter, then remove the old set by running the Remove-NetIPsecMainModeCryptoSet cmdlet.

매개 변수

-AsJob

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭	Session
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Description<String>

Specifies that matching main mode cryptographic sets of the indicated description are modified. Wildcard characters are accepted.
This parameter provides information about the main mode cryptographic sets. This parameter specifies a localized, user-facing description of the object.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-DisplayGroup<String[]>

Specifies that only matching main mode cryptographic sets of the indicated group association are modified. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using this cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify the Group parameter with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecMainModeCryptoSet cmdlet, but can be modified using dot notation and this cmdlet.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-DisplayName<String[]>

Specifies that only matching main mode cryptographic sets of the indicated display name are modified. Wildcard characters are accepted.
This parameter specifies the localized, user-facing name of a single main mode cryptographic sets. When creating a set this parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing resilient scripts, the Name parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter value cannot be All.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-ForceDiffieHellman<Boolean>

Indicates that matching main mode cryptographic sets of the indicated value are modified.
If this parameter is set to True, then IPsec uses Diffie-Hellman exchanges to protect the main mode key exchange when AuthIP is used. AuthIP is specified by KeyModule. This provides stronger security for the key exchange.
The default value is False.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-GPOSession<String>

Specifies the network GPO from which to retrieve the sets to be modified.
This parameter is used in the same way as the PolicyStore parameter. When modifying Group Policy Objects (GPOs) in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Group<String[]>

Specifies that only matching main mode cryptographic sets of the indicated group association are modified. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups organize rules by influence and allows batch rule modifications. Using this cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify this parameter with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecMainModeCryptoSet cmdlet, but can be modified using dot notation and this cmdlet.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-InputObject<CimInstance[]>

이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.

별칭	없음
필수 여부	true
위치	named
기본값	없음
파이프라인 입력 적용 여부	True (ByValue)
와일드카드 문자 허용 여부	false

-MaxMinutes<UInt32>

Specifies that matching main mode cryptographic sets of the indicated maximum lifetime, in minutes, are modified.
This parameter specifies the number of minutes established for a main mode security association before it expires and must be renegotiated.
이 매개 변수에 허용되는 값은 다음과 같습니다. 0 through 2879.
-- A non-zero value specifies the desired minute lifetime.
-- NotConfigured: Valid only when configuring a GPO. Removes the setting from the GPO, which results in the policy not changing the value on the computer when the policy is applied.
The default value is 4800 minutes (eight hours).
When managing a GPO, the default setting is NotConfigured.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-MaxSessions<UInt32>

Specifies that matching main mode cryptographic sets of the indicated maximum lifetime, in sessions, are modified.
This parameter specifies the number of sessions established for a main mode security association before it expires and must be renegotiated. 이 매개 변수에 허용되는 값은 다음과 같습니다. 0 through 2147483647.
-- A value of zero (0) specifies that there should be no maximum session lifetime.
-- A non-zero value specifies the desired session number.
-- NotConfigured: Valid only when configuring a GPO. Removes the setting from the GPO, which results in the policy not changing the value on the computer when the policy is applied.
The default value is zero (0) sessions.
When managing a GPO, the default setting is NotConfigured.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Name<String[]>

Specifies that only matching main mode cryptographic sets of the indicated name are modified. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So, if an administrator has a different or more specific rule the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When you want to override the defaults for main mode encryption, specify the customized parameters and set this parameter, making this parameter the new default setting for encryption.

별칭	ID
필수 여부	true
위치	1
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-NewDisplayName<String>

Specifies the new display name for a main mode cryptographic set.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-PolicyStore<String>

Specifies the policy store from which to retrieve the sets to be modified.
A policy store is a container for firewall and IPsec policy.
이 매개 변수에 허용되는 값은 다음과 같습니다.
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically, during application installation, on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the Static Windows Service Hardening (WSH), and the Configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: This cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetIPsecMainModeCryptoSet cmdlet or with the New-NetIPsecMainModeCryptoSet cmdlet.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Proposal<CimInstance[]>

Associates the specified cryptographic proposal to the corresponding cryptographic set to be used in main mode negotiations. Separate multiple entries with a comma.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭	없음
필수 여부	false
위치	named
기본값	없음
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

필수 여부	false
위치	named
기본값	false
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

필수 여부	false
위치	named
기본값	false
파이프라인 입력 적용 여부	false
와일드카드 문자 허용 여부	false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\AssociatedNetIPsecMainModeCryptoSet[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\AssociatedNetIPsecMainModeCryptoSet[]

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

EXAMPLE 1

This example replaces the proposals of an existing main mode cryptographic set.

PS C:\> $EncAES128 = New-NetIPsecMainModeCryptoProposal -Encryption AES128

PS C:\> $EncDES3 = New-NetIPsecMainModeCryptoProposal -Encryption DES3

PS C:\> Set-NetIPsecMainModeCryptoSet -DisplayName "(DA Client) - Phase 2 Crypto Set" –Proposals $EncAES128,$EncDES3

EXAMPLE 2

This example modifies the maximum amount of time the security association is active for a group of main mode cryptographic sets.

PS C:\> Set-NetIPsecMainModeCryptoSet -DisplayGroup "DA Client" –MaxMinutes 240

EXAMPLE 3

This example shows how to replace a key exchange option of a main mode cryptographic proposal to an existing main mode cryptographic set, given the associated main mode rule. The key exchange is changed for the second specified cryptographic proposal.

PS C:\> $proposal1 = New-NetIPsecMainModeCryptoProposal -KeyExchange DH1

PS C:\> $proposal2 = New-NetIPsecMainModeCryptoProposal -KeyExchange DH14

PS C:\> $cryptoset1 = ( New-NetIPsecMainModeCryptoSet -DisplayName MainModeCryptoSet -Proposal $proposal1.Name, $proposal2.Name )

PS C:\> $mainModeRule = New-NetIPsecMainModeRule -DisplayName MainModeRule -MainModeCryptoSet $cryptoset1

PS C:\> $mainModeCryptoSet = ( $mainModeRule | Get-NetIPsecMainModeCryptoSet )

PS C:\> $mainModeCryptoSet.Proposal[1] = DH19

PS C:\> Set-NetIPsecMainModeCryptoSet –InputObject $mainModeCryptoSet

This version of the cmdlet shows an alternative method to the previous example. Note: The main mode rule setup is the same.

PS C:\> $mainModeRule = New-NetIPsecMainModeRule -DisplayName MainModeRule -MainModeCryptoSet ( New-NetIPsecMainModeCryptoSet -DisplayName MainModeCryptoSet -Proposal ( New-NetIPsecMainModeCryptoProposal -KeyExchange DH1 ),(New-NetIPsecMainModeCryptoProposal -KeyExchange DH14 ) ).Name

PS C:\> $mainModeCryptoSet = ( $mainModeRule | Get-NetIPsecMainModeCryptoSet )

PS C:\> $mainModeCryptoSet | Set-NetIPsecMainModeCryptoSet –Proposal ( New-NetIPsecMainModeCryptoProposal -KeyExchange DH1 ), ( New-NetIPsecMainModeCryptoProposal -KeyExchange DH19 )

관련 항목

Copy-NetIPsecMainModeCryptoSet

Get-NetIPsecMainModeCryptoSet

New-NetIPsecMainModeCryptoSet

New-NetIPsecMainModeRule

Open-NetGPO

Save-NetGPO

Remove-NetIPsecMainModeCryptoSet

New-NetIPsecMainModeCryptoProposal

New-GPO