New-NetIPsecQuickModeCryptoProposal

New-NetIPsecQuickModeCryptoProposal

Creates a quick mode cryptographic proposal that specifies a suite of cryptographic protocols to offer in IPsec quick mode negotiations with other computers.

구문

Parameter Set: Default
New-NetIPsecQuickModeCryptoProposal [-AHHash <HashAlgorithm> ] [-Encapsulation <IPsecEncapsulation> ] [-Encryption <EncryptionAlgorithm> ] [-ESPHash <HashAlgorithm> ] [-MaxKiloBytes <UInt64> ] [-MaxMinutes <UInt64> ] [ <CommonParameters>]

자세한 설명

The New-NetIPsecQuickModeCryptoProposal cmdlet creates a single cryptographic proposal to be used in quick mode negotiations.

A NetIPsecQuickModeCryptoProposal object provides the necessary security parameters for the negotiation of a quick mode security association (SA). The IPsec protocol, either AH or ESP, is provide in the Encapsulation parameter, the hashing algorithm for data integrity and authentication in the AHHash and ESPHash parameters, and the algorithm for encryption, if requested, in the Encryption parameter.

Multiple NetIPsecQuickModeCryptoProposal fields are grouped into a single NetIPsecQuickModeCryptoSet object. The quick mode exchange will use the first proposal that the peers have in common. A NetIPsecPhase2AuthSet object and a NetIPsecMainModeCryptoSet object get associated to a NetIPsecRule object to provide all the necessary SA parameters for customized quick mode negotiations.

매개 변수

-AHHash<HashAlgorithm>

Specifies the proposed hash algorithm for data integrity and authentication.
이 매개 변수에 허용되는 값은 다음과 같습니다. None, MD5, SHA1, SHA256, AESGMAC128. AESGMAC192, or AESGMAC256.
The default value is None.

-Encapsulation<IPsecEncapsulation>

Specifies the IPsec protocol method.
이 매개 변수에 허용되는 값은 다음과 같습니다. None, AH, AH,ESP, or ESP.
AH (authentication header) and ESP (encapsulating security payload) can both be specified or None can be specified.
-- AH,ESP: Supported in all platforms.
-- None: Supported in and Windows Server® 2012.
-- AH: Supported in Windows Server 2008 R2 and Windows Server 2012.
The default value is None.
Note: AH is not supported with the transport mode IKEv2 keying module.

-Encryption<EncryptionAlgorithm>

Specifies the value for a main or quick mode cryptographic proposal.
이 매개 변수에 허용되는 값은 다음과 같습니다. None, DES, DES3, AES128, AES192, AES256, AESGCM128, AESGCM192, or AESGCM256.
Note: GCM encryption is not supported in phase 1 authentication for Windows Server 2008 R2 and Windows Server 2012. AESGCM128, AESGCM192, and AESGCM256 are not supported for IPsec main mode security association negotiations.

-ESPHash<HashAlgorithm>

Specifies the proposed hashing algorithm for data confidentiality and authentication.
이 매개 변수에 허용되는 값은 다음과 같습니다. None, MD5, SHA1, SHA256, AESGMAC128. AESGMAC192, or AESGMAC256.
If the Encapsulation parameter is specified as AH is used, then the acceptable values for this parameter are: AESGMAC128, AESGMAC192, AESGMAC256, MD5, SHA1, or SHA256.
If the Encapsulation parameter is specified as ESP or AH,ESP, then the acceptable values for this parameter are: AESGMAC128, AESGMAC192, AESGMAC256, MD5, SHA1, or SHA256.
The default value is None.

-MaxKiloBytes<UInt64>

Specifies the maximum lifetime, in kilobytes, that the IKE message sender proposes for a security association to be considered valid after it has been created.
이 매개 변수에 허용되는 값은 다음과 같습니다. 20480 through 2147483647.
-- A non-zero value specifies the desired lifetime, in kilobytes.
The default value is 100000.

-MaxMinutes<UInt64>

Specifies the number of minutes established for a quick mode security association before it expires and must be renegotiated.
이 매개 변수에 허용되는 값은 다음과 같습니다. 5 to 2879.
-- A non-zero value specifies the desired minute lifetime.
The default value is 60 (minutes).

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• None

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIKEQMCryptoProposal

  Microsoft.Management.Infrastructure.CimInstance 개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.

예제

EXAMPLE 1

This example creates an IPsec tunnel that routes traffic from a private network (192.168.0.0/16) through an interface on the local computer (1.1.1.1) attached to a public network to a second computer through its public interface (2.2.2.2) to another private network (192.157.0.0/16). All traffic through the tunnel is integrity checked using ESP and SHA1, and encrypted using ESP and AES128.

PS C:\> $QMProposal = New-NetIPsecQuickModeCryptoProposal -Encapsulation ESP -ESPHash SHA1 -Encryption AES128

PS C:\> $QMCryptoSet = New-NetIPsecQuickModeCryptoSet –DisplayName "esp:sha1-des3" -Proposal $QMProposal

PS C:\> New-NetIPSecRule -DisplayName "Tunnel from HQ to Dallas Branch" -Mode Tunnel -LocalAddress 192.168.0.0/16 -RemoteAddress 192.157.0.0/16 -LocalTunnelEndpoint 1.1.1.1 -RemoteTunnelEndpoint 2.2.2.2 -InboundSecurity Require -OutboundSecurity Require -QuickModeCryptoSet $QMCryptoSet.Name

EXAMPLE 2

This example creates a domain isolation rule, but uses a custom quick mode proposal that includes multiple quick mode suites, separated by commas.

This cmdlet illustrates how to include both AH and ESP protocols in a single suite.

PS C:\> $AHandESPQM = New-NetIPsecQuickModeCryptoProposal -Encapsulation AH,ESP -AHHash SHA1 -ESPHash SHA1 -Encryption DES3

This cmdlet illustrates how to specify the use of the AH protocol only.

PS C:\> $AHQM = New-NetIPsecQuickModeCryptoProposal -Encapsulation AH -AHHash SHA1 -ESPHash None -Encryption None

This cmdlet illustrates how to specify the use of the ESP protocol only, and uses the None keyword to specify not to include an encryption option, also known as "ESP null encryption".

PS C:\> $ESPQM = New-NetIPsecQuickModeCryptoProposal -Encapsulation ESP -ESPHash SHA1 -Encryption None

This cmdlet illustrates how to use the None keyword to specify that ESP is used with an encryption protocol, but with no integrity protocol. This cmdlet also illustrates how to set a custom SA timeout using both time and data amount values.

PS C:\> $ESPnoAHQM = New-NetIPsecQuickModeCryptoProposal -Encapsulation ESP -ESPHash None -Encryption AES256 -MaxKiloBytes 50000 -MaxMinutes 30

PS C:\> $QMCryptoSet = New-NetIPsecQuickModeCryptoSet –DisplayName "Custom Quick Mode" -Proposal $AHandESPQM,$AHQM,$ESPQM,$ESPnoAHQM

PS C:\> New-NetIPsecRule -DisplayName "Domain Isolation Rule" -InboundSecurity Require Request -OutboundSecurity Request -QuickModeCryptoSet $QMCryptoSet.Name

관련 항목

New-NetIPsecMainModeCryptoSet

New-NetIPsecRule